Categories

Best Pvdf Machined Parts

10pcs Syringe Filter,Syringe Lab Filters,Nylon Membrane 25mm Diameter 0.45um Pore Size,Non Sterile Filtration,Yellow

  • Syringe Filters PVDF:Hydrophobic PVDF membrane with Polypropylene(PP) housing,non sterile.
  • Diameter:13mm,25mm,pore size:0.22um,0.22um,10/pack.
  • Connectors:Inlet：Female luer,Outlet:male slip luer.
  • Excellent unit-to-unit and lot-to-lot reproducibility and consistency.
  • Main features:Good heat--endurance and chemical stability.
Check Stock

Adamas-Beta Syringe Filters PVDF 13mm Diameter 0.22μm Pore Size 100pcs

  • SPECIFICATION - PVDF syringe filters diameter: 13mm, pore size: 0.22um, 100pcs.
  • UNIFORM PORE SIZE - The pore size distribution of the filter membrane is uniform, the porosity is high, and the filtering effect is good.
  • UNIQUE DESIGN - These PVDF syringe filters is that they are wall marked for .22um - when working with different requirements for filtration one needs....
  • PREMIUM MATERIAL - Hydrophobicity, with high flow rate and lowest protein adsorption. It has high chemical and thermal stability, acid and alkali....
  • SUITABLE - Widely used in science laboratories for filteration of small volume samples, such as culture medium, additives, grain spawn jars, buffers....
Check Stock

JoyTube 5 Packs Check Valve 1/8” 3MM One-Way PVDF Plastic Hose Barb for Fuel Gas Liquid Air

  • One way inline Check valve can connect with hose barb in both sides.
  • Barb hose check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa.
  • PVDF wear resistant check valve’s inside is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Made of PVDF, sturdy, wear-resistant and durable for long service.
Check Stock

Feelers 1/2 One Way Inline Check Valve Non-Return One-Way Air Water Gas Check Valve Ozone Resistance PVDF Pack of 4

  • 【Material】The one way check valves are made of PVDF, and the Diaphragm material is silicon rubber..
  • 【Function】 These 1/2 Inch check valves are applicable for fluid systems to stop countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
  • 【Size】Diameter: 1/2"barb, can fit 1/2" hose ID.
  • 【Performance】Strong Resistance to acid, alkali, salt corrosion ability, can be used for different types of liquid.Normal performance under 25 ℃ to 60 ℃..
  • 【Wide Application】Widely used in water treatment, air purification, automotive parts, machinery industry, medical equipment, household appliances and other fields..
Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm in CNC Aluminum for Professional / Advanced / Standard

  • Compatible with Phantom 3 Professional, Advanced, Standard.
  • For repairing broken DJI Phantom 3 Yaw Arms.
  • Anodized Silver to match original parts, includes Set Screw + Hex WrenchDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock

uxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs

  • Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
  • Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
  • Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
  • Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
  • Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check Stock

Woodpeckers Stainless Steel Square - 12" -1282 – 2019

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodpeckers in-DEXABLE DOUBLE SQUARE - STANDARD - 6 INCH BLADE

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodworkers Edge Rule Set - Inch + Edge Rule Rack-It and 4 Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Woodpeckers Paolini Pocket Rules, 150mm Metric Aluminum Woodworking Ruler with Slide Stops

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

  • Compatible with Phantom 3 Professional, Advanced, 4K.
  • Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
  • Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock

ACEgoes Woodworking Scriber T-Square Ruler 12in Architect Ruler for Carpenter Work Layout and Measuring Tools

  • Four Versions: 12",24",300mm,600mm. The 12" and 300mm size is ideal for work with solid lumber and furniture parts. The 24" and 600mm are intended for cabinetry work in the layout of sheet goods, large cabinet parts, entertainment centers and bookcases..
  • Precision: On the two outer edges of the blade, there are laser engraved lines every 1/32" , and the blade itself has precisely spaced 1.3MM holes drilled every 1/16". Stick a pencil in the hole, slide it along your workpiece and a perfectly spaced line accurately following the stock edge..
  • Humanized Design: The inch or metric scales are very clear and readable even for olders and poor lighting conditions. The blade edges are machined to a 45 degree bevel, The beveled design reduces parallax and increases measuring and marking accuracy..
  • Each T-Square consists of a precisely machined, laser engraved, aluminum blade perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • we prefer the 0.7 and 0.9mm mechanical pencil when drawing spaced lines, it is fine enough to do precision work and not easy to broke compared with 0.5mm, also easier than a wooden pencil..
Check Stock

Woodpeckers Precision Woodworking Tools RS-2 Rule Stop, 2-Inch

  • Designed to fit rulers up to 2-1/4-inch wide.
  • Knob, screw & post machined from stainless steel.
  • Body parts are aluminum and anodized for decades of accurate performance.
  • Precision machined edges align easily with engraved scale graduations.
Check Stock