Categories

Best Pwm Ac Motor Control Circuit

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

  • This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
  • 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
  • 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
  • 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
  • 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....
Check Stock

DC Motor Speed Controller PWM Speed Controller DC 12V 24V 60V 500W Electric Motor Speed Control Regulator Power Wheels Speed Controller With PWM Signal Generator Driver Module

  • 【High Grade Material】 This PWM Motor Speed Controller is made of premium quality circuit board material, which has a good durability and wear-resistance to ensure a long term service..
  • 【Soft-s【Soft-start protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.tart protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor..
  • 【Digital Encoder Button】 The digital encoder knob can adjust the motor speed, which is more accurate and consistent to control the engine speed than ordinary potentiometers..
  • 【Features】 The duty cycle maximum and minimum limits can be set, as well as the PWM output frequency..
  • 【Wide Input Voltage Range】 This PWM DC Motor Speed Controller supports a widely input voltage from DC 9V-60V, and it fits to 12V 24V 36V 48V power supply, at the same time the output current is 12A, power 500w, which ensures a widely application. You can use this Adjustable Motor Controller in different occasions upon different purposes..
Check Stock

Onyehn DC Motor PWM Speed Controller3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W(Pack of 2pcs)

  • Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM)..
  • Mini DC 6-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%..
  • Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15v input..
  • By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery..
  • It is not only to use for dc motor controls of the speed,but also to use for adjust the LED light..
Check Stock

PWM DC Motor Speed Controller, Stepless Speed Control Switch Controller 30A DC6-60V 12V 24V 36V 48V

  • 【convenient screw terminals】 This motor speed controller uses screw terminals for convenient and quick wiring. Support motor: DC brush motor..
  • 【momentary start/stop switch】 Momentary start/stop switch and a speed control potentiometer..
  • 【digital display】 Motor regulator 12v designed with a digital display that shows the rate in percentage of actual speed to maximum speed..
  • 【stable】 This simple and easy-to-use DC motor speed controller has an stable performance. The PWM DC motor controller has a continuous current of 20A..
  • 【high quality circuit board】 Speed controller is made with high quality circuit board which ensures a longer service life..
Check Stock

DZS Elec 2PCS Mini DC Motor PWM Speed Controller 5V 6V 12V 24V 35V 5A 90W Control Switch LED Dimmer

  • Operating voltage: DC 5-30V. Operating current :5A. Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15V input..
  • Control power: 90W (maximum). Quiescent current: 0.015A (standby)..
  • PWM duty cycle: 1% -100%.PWM frequency: 10khz..
  • Size: 30x24x15mm/1.18x0.94x0.59Inches (excluding handles).Package Included:2PCS..
  • Use for dc motor controls of the speed and adjust the LED light..
Check Stock

RioRand Upgraded Adjustable DC Motor Speed PWM Controller 10V 12V 24V 30V Reversing Switch 120W

  • Overload short circuit protection current:4A ,short circuit time does not exceed 30 seconds.
  • PWM Pulse Width Modulation Range: 5% -95%.
  • Please note that this controller has a low frequency causing some types of the motor to whine at low speeds but not all motors will be like this.
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

Pulse Generator, DROK 2pcs LCD Display PWM Frequency 1Hz-150kHz Duty Ratio 0-100 Percent Adjustable Square Wave Rectangular Wave Signal Generator Board

  • DROK pulse generator module operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%..
  • Application: it can be used as a square wave signal generator, generate square wave signal for experimental development.
  • generate square wave signal to control the motor driver.
  • generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc)..
  • High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz.
  • range 1.00kHz~9.99kHz, display resolution is 0.01kHz.
  • range 10.0kHz~99.9kHz, display resolution is 0.1kHz.
  • range 1kHz~150kHz, display resolution is 1kHz..
  • TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps..
  • LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently..
Check Stock

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

  • 【Regulate Range】 Input supply voltage: DC 10V-55V.
  • Control frequency: 15KHZ.Please connect the DC power supply to use! Do not continue to use excessive load, the continuous current is 40A, and the peak value is 60A..
  • 【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
  • 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric veh....
Check Stock

RioRand PWM DC Motor Speed Controller Switch Control 7-70V 30A Fuse

  • Wide voltage input 7-70V, maximum output current 30A .Adjustable potentiometer soft cable（about 15CM） can be separated, with running stop brake function.
  • Can be use on long hours of work: Circuit optimization design, stable Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses.
  • Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • PWM Frequency and Share Space: 12KHZ ,The knob has a switch function, which can control the motor speed from 0% to 100%..
Check Stock

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

  • Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
  • Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
  • The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

POLARIS SPORTSMAN KOLPIN QUICK-MOUNT WINCH 3500LB SYNTHETIC ROPE

  • Powerful: AC-DK 5500 lb winch features 3-stage planetary gear train, dynamic brake, weather-sealed solenoid and circuit breaker ensure safe, reliable power in all situation.
  • Efficient: AC-DK 5500 lb. line pull powered by a 1.4kw/1.9hp output permanent magnet DC 12V motor.The reliable dynamic brake prevent the rope from sliding while loading..
  • Convenient: Included two remote control.Fast circuit speed and High sensitivity.Unique clutch brake system, excellent control create an easier than ever winching experience..
  • Special designed: For ATV, UTV, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers.Gear system with free spooling clutch.It will be your best partner on the muddy road..
  • Reliable: AC-DK includes 2-years limited warranty with FREE lifetime technical support from dedicated experts.
Check Stock