Categories

Best Pwm Control

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

darkFlash 120mm RGB Case Fan, CX6 Addressable ARGB Fan with RGB PWM Fan Hub, High Airflow 5V Motherboard Sync, Ultra Quiet, PWM Static Pressure Fan, High Performance Computer Case Fans, 3 Pack

  • 5V ARGB ADDRESSABLE RGB: Fan colors can be set through the mainboard software controller, Sync with 5V RGB enabled motherboards, and intelligent PWM speed control. Use software to achieve more free personalized customization. At the same time, RESET button control can be selected to connect..
  • PWM FAN and PWM CONTROLLER: The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis, Efficient energy saving and environmental protection..
  • PERFECT COOLING PERFORMANCE: Dynamic speed adjustment between 800 rpm to 2,000 rpm pushing up to 55.29 CFM of air, Sound Level- 18 dBA, minimizing noise or maximizing airflow. Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • SPECIAL SHOCK-PROOF DESIGN: Ultra-bright RGB LED lights, provide full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes. 16.8 million colors provide excellent heat dissipation, add fun and bring you a better gaming experience..
  • SIMPLE INSTALLATION & WARRANTY: 120mm CX6 fans link hub can use PWM and ARGB functions. The fan needs to be connected from the PWM/FG ....
Check Stock

darkFlash 120mm RGB Case Fan, CX6 Addressable ARGB Fan with RGB PWM Fan Hub, High Airflow 5V Motherboard Sync, Ultra Quiet, PWM Static Pressure Fan, High Performance Computer Case Fans, 5 Pack

  • 5V ARGB ADDRESSABLE RGB: 5pack 120mm case fans colors can be set through the mainboard software controller, Sync with 5V RGB enabled motherboards, and intelligent PWM speed control. Use software to achieve more free personalized customization. At the same time, RESET button control can be selected to connect..
  • PWM FAN and PWM CONTROLLER: The speed of the argb fans can be read through the motherboard software, Also the motherboard can automatically control the speed of the computer case fan according to the temperature of the chassis, Efficient energy saving and environmental protection..
  • PERFECT COOLING PERFORMANCE: Dynamic speed adjustment between 800 rpm to 2,000 rpm pushing up to 55.29 CFM of air, Sound Level- 18 dBA, minimizing noise or maximizing airflow. Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • SPECIAL SHOCK-PROOF DESIGN: Ultra-bright RGB LED lights, provide full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes. 16.8 million colors provide excellent heat dissipation, add fun and bring you a better gaming experience..
  • SIMPLE INSTALLATION & WARRANTY: 120mm CX6 5pack RGB fans link hub can use PWM and ARGB functions....
Check Stock

PWM Signal Converter Module Digital to Analog Voltage Converter Adapter White

  • PWM voltage converter Convert 0-100% PWM digital signal into analog signal..
  • Signal interface switching between single chip or other industrial control board..
  • The power supply has the function of reverse connect protection, safe to use ..
  • Input digital signal can be 24V level 0-100%PWM signal. Output analog signal can be 0-10V voltage..
  • PWM signal receiving frequency range: 100hz-3khz, recommended 1khz-3khz..
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

Noctua NF-A9 PWM, 4-Pin Premium Cooling Fan (92mm, Brown)

  • ...all standard screws and other mounting systems.
  • The NF-A9 features the further optimized second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilization, precision and durability.
  • Supporting fully automatic PWM speed control, the NF-A9 PWM uses Noctua’s novel, custom designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.
  • The NF-A9 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 2000 to 1550rpm. The L.N.A can be used either to run the fan at a fixed speed of 1550rpm or to cap the maximum speed when using automatic PWM control.
  • The fan’s short 20cm primary cable minimizes cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary.
Check Stock

Noctua NF-A12x25 LS-PWM Ultra Quiet Silent Fan 4-Pin 120mm Brown

  • Ultra low noise fan, 120x120x25mm, 12V, 4-pin PWM, max. 1200 RPM, max. 12.1 dB(A), >150,000 h MTTF.
  • Next-generation 120x25mm A-series design provides unprecedented quiet cooling performance, ideal for CPU coolers and watercooling radiators.
  • State-of-the-art engineering (AAO frame, Flow Acceleration Channels, record tight 0.5mm tip clearance) and construction (Sterrox LCP material,....
  • Ultra-quiet 4-pin LS-PWM version, ideal for semi-passive setups (fan stops at 0% PWM) or ultra-low-noise applications that require PWM control.
  • Includes anti-vibration mounts, radiator gasket, fan screws, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

upHere 120mm PWM 4-Pin High Airflow Long Life Case Fan for PC Cases, CPU Coolers, and Radiators 3-Pack,SR12-BW4-3-US

  • Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency..
  • Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • 1600rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control 120x120x25 mm, 12V, 4-pin PWM, max. 1600 RPM, max. 19.9 dB(A),max.68.62CFM.
  • The performance-oriented top speed of the 1600rpm PWM version is ideal for high efficiency case, radiator and CPU cooling as well as other applications that require both extended performance headroom and PWM for automatic speed control..
  • What You Get:SR12-BW4 Case Fans, our worry-free 12-month warranty and friendly customer service..
Check Stock

Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V.
  • Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed..
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation..
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance..
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy..
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

Noctua NF-F12 PWM Premium Quiet Fan 4-Pin 120mm Brown

  • Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 22.4 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior quiet cooling performance.
  • Ideal for CPU heatsinks (e.g. Noctua NH-U12(S) series) and water cooling radiators, perfect replacement fan for loud all-in-one (AIO) coolers.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock