Categories

Best Qrp Antenna

1-30 MHZ Manual Antenna Tuner kit for HAM Radio QRP DIY Kit

  • This antenna tune kit comes with the standing wave directions..
  • Using a T-type topology network, shortwave 1-30MHz..
  • Can withstand the transmit power of 15W..
  • The tuning range of approximately 30-300 ohms..
  • Very convenient for QRP communication, to ensure high efficiency radio transceiver in communication, but also allows you to fully enjoy the fun of....
Check Stock

Emergency Weather Radio with NOAA/AM/FM, Solar Hand Crank Radio with 5000mAh Rechargeable Battery, Survival Portable Radio with LED Flashlight,Battery Operated, SOS Alarm for Home or Emergency(Green)

  • Reliable Work: A pocket sized 8 band SSB CW QRP transceiver designed with built in lithium battery, built in microphone, PTT button and extremely low RX current consumption, it is a good partner for SOTA, POTA or any other portable activities..
  • Better Design: This QRP SSB CW shortwave transceiver has a large screen, built in battery, charger, built in microphone and speaker. It can be connected to an automatic button. It can also be decode CW coding..
  • IRF Launch Tube: With durable IRF series launch tube, can be used to connect antenna, which is on the instrument base..
  • Simple Structure: All aluminum buttons and translucent silicone buttons, the original transformer qcx circuit is greatly simplified, and the installation components are reduced by 50%. No complicated windings. There is no wiring procedure..
  • High Efficiency: High power efficiency and simple design, thanks to eer electronic level transmitters, also very convenient to carry..
Check Stock

HF Transceiver Kit Manual Antenna Tuner Tune DIY Precision Kit 1-30 Mhz for HAM Radio QRP DIY Kit

  • 【DIY Anteena Tuner Kit】This kit welding comes with standing instructions,used to make transceiver and antenna effective match to meet your....
  • 【Q9 Type Interface】Q9 type interface (such as the need to own M-type interface), using T-topology networks, shortwave 1-30MHz. Can withstand the....
  • 【Tuning Matching Range】The antenna impedance matching range is about 30 - 300 ohms, Can be very convenient for QRP communication, to ensure high....
  • 【Purchase Note】This kit is not a ready product but need welding and install by yourself, i believe that you to fully enjoy the fun of DIY..
Check Stock

ATU-100 Tyny Version ATU-10 QRP Automatic Antenna Tuner 1.4 Version by N7DDC

  • [ATU-10 Version] Latest program：1.4 version has been burned..
  • [Product Features]Machine with Shell（with battery）,No need to assemble,can use it directly. Developed by N7DDC. equipped with a 0.91 inch OLED screen.
  • [High-quality Accessories] high-quality brand capacitors with a voltage resistance of 500V.And the PIC chip imported..
  • [Remarkably Compact] The shell of the machine is designed by an excellent designer, compact and exquisite..
  • [What You Get]: ATU-10 Tyny QRP Automatic Antenna Tuner machine with Shell..
Check Stock

Yaesu FT-818 Radio and Accessory Bundle - 3 Items - Includes FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver, LDG Z-817 Automatic Antenna Tuner, and Ham Guides TM Quick Reference Card

  • Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver.
Check Stock

XIEGU G1M Portable QRP HF Transceiver SDR Transceiver Four Bands SSB CW AM Mode 5 Watt

  • [Mini 5 Watt QRP Transceiver] Receiving capability 0.5-30 MHz general coverage and transmitting capabilities on four most popular amateur radio bands, the G1M is a highly portable QRP transceiver and has a clear and bright OLED screen..
Check Stock

Tecsun H501 Digital Worldband AM/FM Shortwave Longwave Radio with SSB Reception, Dual Speakers, & MP3 Player, Matte Black

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

1:1 Mini Balun, Consumer Electronics with Stable Performance for HF Shortwave Antenna for Outdoor QRP Station and Furniture

  • 【High Quality】The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • 【Feature】The withstand power of the 1:1 mini balun is 100W SSB, with small size and easy to disassemble, carry and store, can bring you more convenient..
  • 【Application】The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories..
  • 【Product Parameter】The QRP mini balun size is approximately 91 x 36 x 26mm / 3.6 x 1.4 x 1in (including terminals), and the housing size is approximately 61 x 36 x 26mm / 2.4 x 1.4 x 1 inch..
  • 【Quality Assurance】This video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture (1:9)

  • CHARACTERISTIC: The withstand power of the mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store..
  • PRACTICAL: The QRP mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc..
  • HIGH QUALITY: The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • WIDE USE: The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories. For long‑term outdoor use, the upper and lower covers of the shell must be bonded and sealed with silica gel..
  • QUALITY ASSURANCE: The video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

sara-u 12V Power HAM Radio 40M CW Shortwave QRP Pixie Transmitter Receiver Module 7.023MHz-7.026MHz for DIY Kit CW Receiver Transmitter

  • This circuit is most early by the foreign design,is the most Junior Amateur Radio choice! Kit using amateur radio electric door band....
  • This suite is PIXIE low power transceiver classic, recommend the use of search Pixie QRP,will see a lot of English website of its introduction..
  • This QRP Pixie Kit not fished,is diy kit,suite welding need electronic technology basis,please bring your own multimeter and electric iron tool..
  • when receiving the vibration frequency is 7.023-7.026MHz adjustable,can easily beat frequency, greatly facilitate the primary lovers enjoy radio....
  • Kit consists of the modifications to the original design circuit PIXIE,now launch of the vibration frequency is fixed at 7.023MHz,.
Check Stock

Magnus VT-4000 Tripod System with Fluid Head

  • Supports 8.8 lb (4 kg) | 65mm Ball Diameter | 2-Stage Leg Design.
  • Height Adjustment Range - 27.6" to 59" | Middle Spreader | Fixed Counter Balance.
  • Fixed Pan / Tilt Drag | +20/-25mm Slide Range | Lightweight Tripods | With Quick Release Plate.
  • In The Box: VT-QRP400 Quick Release Plate, Carrying Case, Allen Keys (2), Limited 1-Year manufacture Warranty.
Check Stock

Magnus VT-100 Tripod System with 2-Way Pan Head

  • Supports 4.4 lb | 2-Way Pan Head | 3-Section Leg Design.
  • Height Range - 18.6 to 59" | Separate Pan/Tilt Locks | Mid-Level Spreader.
  • Built-In Bubble Level | With Quick-Release Plate | Gear-Driven Center Column.
  • Whats In The Box: VT-QRP10 Quick-Release Plate, Carrying Case With Shoulder Strap, Limited 1-Year Warranty.
Check Stock