Categories

Best Qrp Transceiver

Tecsun H501 Digital Worldband AM/FM Shortwave Longwave Radio with SSB Reception, Dual Speakers, & MP3 Player, Matte Black

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

sara-u 12V Power HAM Radio 40M CW Shortwave QRP Pixie Transmitter Receiver Module 7.023MHz-7.026MHz for DIY Kit CW Receiver Transmitter

  • This circuit is most early by the foreign design,is the most Junior Amateur Radio choice! Kit using amateur radio electric door band....
  • This suite is PIXIE low power transceiver classic, recommend the use of search Pixie QRP,will see a lot of English website of its introduction..
  • This QRP Pixie Kit not fished,is diy kit,suite welding need electronic technology basis,please bring your own multimeter and electric iron tool..
  • when receiving the vibration frequency is 7.023-7.026MHz adjustable,can easily beat frequency, greatly facilitate the primary lovers enjoy radio....
  • Kit consists of the modifications to the original design circuit PIXIE,now launch of the vibration frequency is fixed at 7.023MHz,.
Check Stock

1-30 MHZ Manual Antenna Tuner kit for HAM Radio QRP DIY Kit

  • This antenna tune kit comes with the standing wave directions..
  • Using a T-type topology network, shortwave 1-30MHz..
  • Can withstand the transmit power of 15W..
  • The tuning range of approximately 30-300 ohms..
  • Very convenient for QRP communication, to ensure high efficiency radio transceiver in communication, but also allows you to fully enjoy the fun of....
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock

Reround USDR USDX 80/40/20/17/15/10M 6 Band SDR All Mode HF SSB QRP Transceiver Compatible with USDX QCX-SSB

  • List of features:Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions.
  • Approximately 5W PEP SSB output from 13.8V supply.
  • DSP filters: 3000, 2500, 1700, 500, 200, 100, 50 Hz passband.
Check Stock

Yaesu FT-818 Radio and Accessory Bundle - 3 Items - Includes FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver, LDG Z-817 Automatic Antenna Tuner, and Ham Guides TM Quick Reference Card

  • Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver.
Check Stock

HF Transceiver Kit Manual Antenna Tuner Tune DIY Precision Kit 1-30 Mhz for HAM Radio QRP DIY Kit

  • 【DIY Anteena Tuner Kit】This kit welding comes with standing instructions,used to make transceiver and antenna effective match to meet your....
  • 【Q9 Type Interface】Q9 type interface (such as the need to own M-type interface), using T-topology networks, shortwave 1-30MHz. Can withstand the....
  • 【Tuning Matching Range】The antenna impedance matching range is about 30 - 300 ohms, Can be very convenient for QRP communication, to ensure high....
  • 【Purchase Note】This kit is not a ready product but need welding and install by yourself, i believe that you to fully enjoy the fun of DIY..
Check Stock

Cingc TZT USDR USDX SDR Transceiver All Mode 8 Band HF Ham Radio QRP CW Transceiver 80M/60M/40M/30M/20M/17M/15M/10M

  • Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions.
  • Approximately 5W PEP SSB output from 13.8V supply.
  • Software-based VOX that can be used as fast Full Break-In (QSK and semi-QSK operation) or assist in RX/TX switching for operating digital modes (no CAT or PTT interface required), external PTT output/PA control with TX-delay.
Check Stock

1:1 Mini Balun, Consumer Electronics with Stable Performance for HF Shortwave Antenna for Outdoor QRP Station and Furniture

  • 【High Quality】The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • 【Feature】The withstand power of the 1:1 mini balun is 100W SSB, with small size and easy to disassemble, carry and store, can bring you more convenient..
  • 【Application】The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories..
  • 【Product Parameter】The QRP mini balun size is approximately 91 x 36 x 26mm / 3.6 x 1.4 x 1in (including terminals), and the housing size is approximately 61 x 36 x 26mm / 2.4 x 1.4 x 1 inch..
  • 【Quality Assurance】This video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture (1:9)

  • CHARACTERISTIC: The withstand power of the mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store..
  • PRACTICAL: The QRP mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc..
  • HIGH QUALITY: The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • WIDE USE: The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories. For long‑term outdoor use, the upper and lower covers of the shell must be bonded and sealed with silica gel..
  • QUALITY ASSURANCE: The video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

AnyTone AT-5888UV 50W Dual Band Ham Mobile Radio VHF 144-148MHZ / UHF 420-450MHz Car Transceiver

  • 1.The transceiver is a ruggedly-built,high quality Dual-band transceiver providing 50Watts of power output. Quad band transceiver for the widely....
  • 2.Dual-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3. Cross Band Repeater: 758 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS,....
  • 4.CHIRP SUPPORT. Free software also can download at Anytone office website..
  • 5.Package contents: 1 x Anytone 5888UV Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws for....
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock