Tech Deck - Starter Kit - Ramp Set with Exclusive Board and Trainer Clips

  • COUNTLESS COMBINATIONS: The Starter Kit has nearly countless layout combinations as you reconfigure your course over and over in new ways! The ramps also feature an awesome concrete like finish across the quarter pipe, launch ramp, and kickers..
  • TRAINER CLIPS: Use the included Trainer Clips to practice and make it easy to catch some air!.
  • SIGNATURE PRO BOARD: The Starter Kit works with Tech Deck BMX (sold separately) and includes a signature Stevie Williams board from DGK to get you started..
  • Tech Deck Starter Kit is for skate-lovers ages 6+. No batteries required.DescriptionTech Deck brings you the real deal with 96mm fingerboards featuring authentic graphics from real skate companies and tons of skate accessories! The Starter Kit includes everything you need to get started, including a signature Stevie Williams DGK board, a set of killer ramps to master, and trainer clips to make it easy to catch air and give you a hand in perfecting new tricks. This Starter Kit features an awesome concrete like finish on the flat banks, quarter pipe, and launch ramp. Build countless different configurations for your course and recreate your favorite skate tricks and expand your skills by checking out online tutorial videos on techdeck.com. As you build your collectio....
Check Stock

PROCURU 10-Pack PushFit Angle Stop Valve 1/2\ x 3/8\ OD Compression, Quarter-Turn Shutoff for Bathroom Fixtures - Faucet, Toilet, Lead Free Certified

  • PUSHFIT INLET: 1/2" Nominal (5/8" OD) for 1/2" Pipe.
  • OUTLET: 3/8" OD Compression for faucet/ toilet supply connector.
  • FAST & EASY INSTALLATION: No need for installation tools, glue, torch, or soldering! Simply push-to-connect pipe made of Copper, PEX, CPVC..
  • FEATURES: Quarter-Turn ON/OFF, Heavy duty solid grade brass, Chrome plated.
  • CERTIFICATIONS & COMPLIANCE: UPC, NSF, ANSI, Lead Free Act.
  • WHAT'S INCLUDED: PushFit Angle Stop Valve, Quantity of 10.
Check Stock

Milwaukee 2471-21 12-Volt Copper Tubing Cutter Kit

  • 12V LITHIUM-ION battery for longer run-time.
  • Close quarter rotating cutting head cuts pipe in confined spaces.
Check Stock

One On One With James Blunt

  • Role-play in four locations: skate park, art workshop, dance studio and sports court.
  • Choose a skateboard and skate down the quarter pipe.
Check Stock

St Elmo s Fire

  • Role-play in four locations: skate park, art workshop, dance studio and sports court.
  • Choose a skateboard and skate down the quarter pipe.
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

Sesh Pre-Rolled Cones - Jar of 50 Cones - The King - Hemp Wrap

  • Role-play in four locations: skate park, art workshop, dance studio and sports court.
  • Choose a skateboard and skate down the quarter pipe.
Check Stock

8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car

  • ...on-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
  • 【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
  • 【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
  • 【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the process of purchase or use, please contact us to help you..
Check Stock

1/4 Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors

  • 1/4" Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors Drain Cock Ball Valve for Air Compressors One Quarter turn to fully open....
  • 1/4" NPT Male Pipe Threads Fits: DeWalt & Porter Cable Craftsman , DeVilbiss , Emglo , Dewalt , Jenny , Rol-Air , J-Air , C/H and Many others. Large....
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

MoBoard Classic 27" Skateboard | Pro and Beginner | 27 inch Vintage Style with Interchangeable Wheels, Enhanced Bearings | Portable, Lightweight | Durable Rails.,Purple / Yellow

  • MASTER AND PERFECT YOUR SKATEBOARDING GAME WITH A PRO-LEVEL QUARTER PIPE DESIGNED BY ACTUAL SKATERS - Practice makes perfect and having your own skateboard ramp means no longer having to wait at the crowded skatepark to use your favorite obstacles and jumps. Professional quality that fits in your home, backyard or driveway DIY setup. Stores easily in your garage as well!.
  • SAVE TIME AND AVOID THE HASSLE WITH AN EASY TO ASSEMBLE QUARTER PIPE RAMP - No need for Skateboard ramp plans or sourcing materials. Everything you need is pre-cut and pre-drilled so we take the hassle out of the whole process. All you need is a power drill to put your kit together. High-quality exterior lumber and plywood with galvanized metal rail for smooth and rust free grinding..
  • EXCEPTIONAL MATERIALS FOR THE FASTEST AND LONGEST LASTING RIDES- OC Ramps provides skateboarder safe, sturdy and durable grind boxes, ramps and launchers crafted with high quality wood and metals. We are the only ramp company with licensed and bonded general contractors, carpenters, framers and engineers. This is important to know that you’re having a qualified and experienced crew designing and prepa....
Check Stock

Freshpark Professional Foldable & Portable Quarter Pipe for BMX and Skateboard Ramp

  • Foldable, portable quarter pipe platform for skateboarding or BMX biking.
  • Includes sloped main platform, 33-inch-tall legs, and narrow top platform for grinding.
  • Weatherproof urethane/ABS riding surface won't splinter, rot, warp, or expand.
  • Measures 47 x 33 x 10 inches (W x H x D).
Check Stock

Tube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine

  • 【FITS MODEL】- Fits 5/8″ and larger tubing.
  • 【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
  • 【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
  • 【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
  • 【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.
Check Stock