Categories

Best Quick Change Joint

MARSHALLTOWN TapeShooter Drywall Taper, Lightweight, Right-Handed or Left-Handed Style, DuraSoft Handle, Easily Adjustable, Made in The USA, 798D

  • ...joints with caulking plaster, then pour white latex, use tools to stick the joint tape on the center of the joint. Tape Applicators & Taping Knives Also works for inside corners, edges and for all types of partitions and walls..
  • ★【Save Time and Efficiency】: Quick-change internal corner applicator wheel reverses easily with flat applicator wheel. Tape Applicators & Taping Knives help you work efficiently, quickly repair the cracks. You can switch your left and right hand when operating..
  • ★【Dual Adjustable Handle Straps】: One on each side for right or left-handed use. Has its practical ergonomic, you can handle it in all directions. avoiding bending your back In addition to ensuring a uniform result, Tape Applicators & Taping Knives has a padded handle, for precise and pleasant work..
  • ★【Convenient and Good Quality】: Single latch with hinged lid opens easily and quickly for loading tape and mud. Durable polycarbonate body eliminates dents, dings and bent parts for longer life. Tape Applicators & Taping Knives is The Best tool for Wall joint clamping..
Check Stock

Drywall Banjo Taping Tool, Gypsum Board Joint Tool, Flat Box Finishing Set with Reversible Inside Corner Roller Wheel Dual Right Left Hand Operation Drywall Tool B

  • ...GN】Adjustable handle straps on each side for right or left-handed use. Tape Applicators has a padded handle, for precise and pleasant work.Practical ergonomic design avoiding bending your back In addition to ensuring a uniform result..
  • 【SAVE TIME AND EFFICIENCY】Quick-change internal corner applicator wheel reverses easily with flat applicator wheel for the fastest bedding of tape in corners. Tape Applicators helps you to minimize movement..
  • 【NO NEED TO REPLY COMPOUND】Single latch with hinged lid opens easily and quickly for loading tape and mud. Durable polycarbonate body eliminates dents, dings and bent parts for longer life..
Check Stock

StewMac Neck Shims for Guitar Shaped - 6 Pack of 1 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 1-degree hard maple shims.
  • this taper is ideal for guitars with a Tune-o-matic bridge or Floyd Rose.
Check Stock

StewMac Neck Shims for Bass Shaped - 6 Pack of 1 Degree Shims

  • Used to change the angle of a bolt-on bass neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 1-degree hard maple shims.
  • this taper is ideal for guitars with a Tune-o-matic bridge or Floyd Rose.
Check Stock

StewMac Neck Shims for Guitar Shaped - 6 Pack of 0.50 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 0.5-degree hard maple shims.
  • this taper works great on Fender and many other solidbody guitars.
Check Stock

TECHTONGDA Automatic Transmission Fluid Flush Machine Oil Changer Cleaning Machine DC12V 0-60PSI

  • 1. This is a universal equipment which is an ideal tool for cleaning and changing the oil of any type of automatic transmission..
  • 2. It can be connected with the pipeline of the gearbox radiator with the quick joint, so that it can complete the cleaning and oil change of the gearbox and the heat pipe road within 20 minutes, and the change rate of the gearbox oil is close to 100%..
  • 3. It is designed with adjustable pressure, and users can set different pressure and flow rate according to different models..
  • 4. Equipped with two flow meters for oil inlet and return, can always keep the same amount of oil in the gearbox..
  • 5. With automatic heating device, not only make the transmission oil being exchaged under constant temperature environment, but also provides a circulating cleaning mode, which can completely remove the metal debris and oil sludge inside the transmission without dismantling the transmission..
Check Stock

StewMac Neck Shims for Guitar Shaped - 6 Pack of 0.25 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 0.25-degree hard maple shims.
  • this taper offers the most versatility - stacking them will let you really dial in the neck angle....
Check Stock

Tripod Level Stand, 1.2M Aluminum Alloy Tripod Level Stand for Automatic Self Leveling Level Measurement Tool with Bag

  • 3-way joint head with standard removable quick release plate.
  • With clever design, quick release flip locks, and non-slip, wear-resisting rubber feet.
  • 4-section legs with brace, adopted of high quality aluminum alloy, strong and durable in use.
  • Suitable for most automatic self leveling level.
Check Stock

StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3

  • Used to change the angle of a bolt-on bass neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

StewMac Guitar Neck Shims for Bolt-on Necks Made of Solid Maple Blank Set of 3

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

Fevas Pneumatic Fittings Quick Connector PC-G Threaded Straight Through Tube - Color PC12-G02

  • Installation form: Black fast plug joint, white boutique quick plug joint.
Check Stock

UCanaan Customized 1/6 BJD Doll 12 Inch Ball Jointed Dolls + Basic Makeup DIY Dolls

  • 【FEATURES】She is around 30cm(12 inches) heigh. Exquisite craftsmanship and movable 18-joints of articulation, capable of making many poses..
  • 【MATERIAL】Made of high quality plastic to withstand playability..
  • 【NOTE】The Joints and Head Can NOT be Picked.
  • The doll can change facial makeup, great for doll custom DIY making..
  • This doll is a mechanical joint, non elastic joint. The mechanical joint is more compact than elastic joint action, more stable. Baby can stand..
  • PACKAGE INCLUDING：A Naked Doll, Random Gift(a dress or a pair of shoes). If you have any questions about the products you receive, please feel free to contact us. We will respond within 24 hours..
Check Stock

Metallor Electric Guitar Neck Plate 4 Holes with Screws Compatible with Strat Tele Style Electric Guitar Bass Parts Replacement Chrome 64 x 51mm.

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock