Best Quick Disconnect Coupling

LKONWEE 37300 Fuel and AC Line Disconnect Plier, Fuel Line Connector Removal Tool for Replacing Fuel Filters

Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the Lisle 37000 or 39400 disconnect tool sets.
Also works with other fuel and ac line disconnect tools Red rubber handles.
Features a unique design providing extra leverage when disconnecting quick connect coupling air conditioning and fuel lines.
Premium Solid steel material construction offers strength and durability ,plastic handle, soft and comfortable..
The pliers' forks have different sized openings so the tool can be turned around to fit single or two step collar designed connector lines..

with quick disconnect coupling and constant level humidity pan with 2 humidity pads.

Converts your 3 Embers dual fuel grill to natural gas.
Tools needed for installation not included: two adjustable wrenches, phillips screwdriver, pipe-thread sealant.
Converts these 3 Embers Grill Models - GAS7480AS & GAS7480BS.
Check grill owners Manual for conversion instructions.

Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, threaded coupling, quick disconnect, solder male female cable plug.

Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, threaded coupling, panel mount, quick disconnect, solder plug & socket.

Cable outer diameter range: 12-15mm, Wire Size: ≤4mm² or 11AWG, Contact Diameter: Φ2.8mm.
Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.

...ieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
Takes all of the work out of disconnecting and moving or switching from machine to machine.
Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
No special adapters for each tool required.
EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Fits snugly on dust ports for table saw, planer, jointer, and more.

Waterproof 4 pin connector. Cable Range: 8-12mm, Wire Size: ≤4.17mm² or 11AWG, Contact Diameter: Φ3mm.
Rated Voltage/Current : AC 500V/30A, Resistance: 1mΩ.
Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
Waterproof IP68, threaded coupling, panel mount, quick disconnect, solder plug & socket.

5-gallon reserve tank that works with all GQF cabinet incubators.
The clear bucket allows for ease of seeing the current water level and snap-open lid makes refilling easier than ever.
Connecting tubing with quick disconnect coupling and tubbing crimp to block flow from the reserve while disconnected.
Mounting clip for the float easily attaches to the humidity pan in your GQF cabinet.
Easy to setup and saves you the trouble of opening your cabinet to check and refill your humidity pan.

[High Quality]--Made of brass metal construction, durable, reliable .Quick action 6-ball operated, safe design to protects against injury and....
[High/Low SAE Male Fitting]--Quick coupling connections sizes are 1/4" inch SAE Male Fitting. Easy identification with colored knobs - Red for high....
[Widely Applicable]--This adapter is used for connecting 1/4" SAE hose fitting to R134a automobile refrigeration tank, which adapt to the female flare....
[Easy to use]--Quick, Easy Connect/Disconnect, High Flow.
Adjustable to fit different Valve Cores..
[Method of Use]--Connect bottoms with vehicle's R134A service port.
connect the R-134A adapter with the refrigerant hose..

High Quality:Made of corrosion-resistant lead-free brass. The working pressure is up to 5,000 PSI..
Precautions: The inner diameter of M22-14 swivel sell is 14mm, suitable for 14mm, not for 15mm. If you use 15mm fitting, it may cause leakage. Please....
Easy to Use: 3/8" M22 quick installation connector connects to the pump of the high pressure washer. The 3/4" garden hose quick coupling kit fits all....
Package Includes: 2 pack 3/8" quick disconnect + M22-14 male, 2 pack 3/4" female + 1/2" quick connect, 2 pack M22-14 swivel + 3/8" plug, 2 pack 1/2"....
Good Service: Customer satisfaction is our biggest goal, and we are honored to provide you with quality products. If you have any questions, please....

SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
remove using a disconnect clip or disconnect tongs.
VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.