Categories

Best Quick Fist Rubber Clamps

TBVECHI Double-handed Carrying Clamp Granite Carrying Clamps Stone Panel Carriers Tool for Marble Stone Glass Transport

  • 【Grip range】: 0-1.97inch / (0-50mm) Lifting capacity per set : 275lbs.Dimensions : 8 1/2" x 4 3/4" x7 7/8".
  • 【Easy To Lift And Move】:Stone Carrying clamps move any large Glass Slabs/Metal Sheet/Granite/Plywood easily and made the job much easier.They gripped tightly and didn't slide..
  • 【Non-slips Rubber】Rubber padded jaws are vulcanized to increase grip pressure and protect slabs from scratching..
  • 【Quick and Safe】:A pair,quick and easy gravity-assisted carry clamps, promotes safe and proper lifting to reduce strain and injury..
  • 【Worry-free Shopping】: 1 year limited liability warranty ,delivered quickly by Amazon, Good after-sales service.Response in 24 hours.
Check Stock

Weltool Tactical Shotgun Flashlight Mount Universal - QM8 Quick Release Mount FIts Multiple Scope Size 1\-30mm

  • 【Compatible】Figure 8 open-ended light holder with upper and lower clamps, will allow flashlight to be attached to barrels or scopes. With rail on the bottom. Will fit Remington 870.
  • 【With Protective rubber inserts】Incorporated into the holder, reducing friction and shock damage to the surface of the flashlights and other components held in the clamp..
  • 【Quick-Detach (QD) toggle, No tools needed】can quickly install and remove the Light Holder from the barrels or scopes. The QD toggle can also loosen and tighten the clamps by rotating the toggle on its axis..
  • 【Clamps Size】When the adjusting screws are fully tightened, the clamps may hold up to 18 mm, fully opened, the clamps may hold up to 30 mm. QM8 allows for different diameters between the upper and lower clamps (i.e. upper clamp holds 25 mm, lower clamp holds 32.5 mm) The diameter of barrels or scopes held can vary from 18 mm – 30 mm (the flashlight exposed tube body should be at least 25mm.).
  • 【Material】6061 Aerospace Aluminum alloy with anodization, Durable and Light-weight..
Check Stock

Linkstyle 2PCS Crocodile Clamp, Pure Copper 500A Car Battery Charger Clamps Power Replacement Battery Alligator Clips Jumper Cables Clamp Welding Machine clamp Suitable for 12V 24V 36V Input

  • Why Choose us: Our clamps are very strong and clamp tight, pretty strong, size is approx 6.3 inch *4.3 inch, weight is about 7.05 oz. These new clamps have strong springs. It almost takes 2 hands to open them!.
  • Do Job: Support input: 12V, 24V, 36V, current up to 500Amp. The conductors of the crocodile jaws are made of pure copper with good electrical conductivity for optimal performance. The insulation handles are made of rubber material to ensure secured holding when in action..
  • Application: Ideal for various electrical projects such as voltage tester, cars and trucks batteries. Suitable for battery chargers (solar panels, electric fences, etc.) or for running applications from cars or casual batteries (camping, boat, electric fence, etc.).
  • 6 in 1: You will get 2 PCS 500 Amp Strong Car Battery Charger Clamps Connector (1PC Red & 1PC Black). The kit comes with 2 crimp-on wire-ends for the ends of the wires and also contains 2 screws, and 2 nuts to attached the wires to the clamps..
  • Noted: Don't forget to slide the rubber handles over the wires before you secure the wire-ends to the clamps. The handle has a wiring port and a crimping slot for quick access..
Check Stock

TAO Boxing Gloves Professional Fight Bag Gloves (Pink, 12 OZ)

  • Form-fitting, pre-curved design fits the fist like it was custom made.
  • Crafted with genuine full grain leather with a special, 3-layer, polyurethane, foam rubber and quilted horse-hair combination.
  • Increased length, additional wrist support and optimal fist protection.
  • Certified fight gloves are engineered and manufactured to offer superior punching power, incredible hand protection and an already "broken in" feel.
  • Approved for use by all professional and state sanctioning bodies.
Check Stock

Magic Arm Camera Mounts Clamps w/ 1/4' and 3/8' Thread, 19.7” Adjustable Friction Power Articulating Arm with 2.6' Super Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

  • ...4" thread on both ends to install any on-camera flash lights, microphone, LCD monitor, DV Monitor, microphone on one end and other accessories like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. (Note: Optimum load bearing weight of magic arm: less than 2.2 lbs / 1KG.).
  • 【Replaceable Rubber Pads】The mount clamp and the metal clamp have soft rubber pads to prevent the monitor from scratching, and it can clamp objects more firmly to prevent movement. Comes with replaceable rubber pads, so you don’t need to worry about rubber pads abrasion after prolonged use..
  • 【What You Get】You will get: 1 x 19.7” Magic Arm.
  • 1 x Camera Mounts Clamps w/ 1/4" and 3/8" Thread.
  • 2 x Replaceable Rubber Pads of Camera Mounts Clamp. KINDLY NOTE: Loosening and tightening the center knob of both articulating arms also loosens and tightens the swivels ends of the 1/4" thread. If you find the ends are unstable after the mount, please make sure the center knob is tightened..
  • 【100% Satisfaction Service】We have products 100 percent quality inspection, and all customers have 30 days of exchange or return policy and promise to provide a 1 year aftersales service. If you encounter missing or wrong accessories, or other p....
Check Stock

Rago Fabrication Rear Window Molle Storage Panels for 3rd Gen 2016-2023 Toyota Tacoma | Detachable Center Panel | Perfect for Pouches, Extinguisher Mounts, and Other Gear | Made in The USA

  • Made in the USA - Constructed from steel and finished in a dual stage black powder coat, these molle panels are resistant to rust and don't crack from sun damage like plastic panels are prone to do..
  • High Quality Vehicle Molle Panels - Having been one of the first to design steel molle panels for vehicles, we know the best ways to manage your truck's rear storage needs..
  • More Storage Space - Designed with quality, strength, & utility in mind, your panels will be able to withstand the toughest terrain. Our Molle Storage Panels extend your storage space..
  • Compatibility - Rago's Endeavor Rear Window Modular Storage Panels are compatible with 3rd generation Toyota Tacomas. Our mounting solution works perfect to attach the compatible Quick Fist Clamps..
  • Install - Our advanced design gives you the option to remove the center panel. Please note that minor drilling is required for the bottom of the panel while top of the panel utilizes your OEM holes..
Check Stock

Century Strive Machine Washable 10 oz Boxing Gloves for Fitness Boxing Cardio Kickboxing Workouts Donut

  • Specifically Designed to fit a woman's longer, more narrow fist shape.
  • Grip Bars to asist with proper fist formation.
  • Mulit-Layer foam padding for maximum impact absorption.
  • Quick wrist wrap design makes it easy to get the gloves on and off.
  • Machine Wash Cold, Do not Bleach. Tumble Dry low heat..
Check Stock

Qingsi 5Pcs/Set 3D Sublimation Silicone Mug Wrap with 108Ft Heat Resistant Tape 11OZ 12OZ 15OZ Mug Mold Cup Clamp Fixture Heat Transfer Tapes for Printing Mugs Sublimation Transfer Machine

  • ❥❥❥3-SIZED MUG MOLD: Comes with 3pcs heat press silicone mug clamps in 3 sizes with 11 oz( 9.4 x 4.3 inches/ 24 x 11 cm), 12 oz (10.4 x 4.3 inches/ 26.5 x 11 cm) and 15 oz (9.5 x 4.9 inches/ 24.2 x 12.5 cm) mugs respectively.The wide range of sizes can fully meet your various needs of printing..
  • ❥❥❥WITH HEAT TRANSFER TAPE: Width: about 10mm/0.39in.
  • Length: about 33m /108ft.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.The adhesive tape can resist high temperature during thermal transfer to prevent your body from being burnt while operating..
  • ❥❥❥EASY TO USE: Fist, wrap your cup with suitable 3D sublimation silicone clamps, then buckle the metal button to fix the cup, after finishing heating and printing, open the button and take off the silicone clamps.The installation is very simple and can effectively fix the mug during printing..
  • ❥❥❥APPLICATION: These cup clamps can fix the position of the cup to avoid false operation caused by dislocation,suitable for 3D printing. The heat press tape also work well in protecting electronic products, transformer, electric motor, solder, as well as painting, packing fixing, printing PCB board..
Check Stock

Carhartt Pet Toys Rugged Dog Toys for Tug and Fetch, Monkey Fist Dog Pull

  • Carhartt Rubber Handle Monkey Fist Dog Pull. Durable tug and fetch rope pull.
  • Functionally combine the best of all dog and human interaction- Pull, Chew, Fetch- into one tool.
  • Classic, functional monkey’s fist knot is ideal for throwing during fetch training, the knot also serves as a great chew stimuli.
  • Ergonomic handle for robust tugging interaction is strong enough to hold up to chewing. Rope naturally cleans teeth and is soft on teeth and gums.
Check Stock

SURGICAL ONLINE Comprehensive Dental Rubber Dam Kit - Medical Grade Stainless Steel Rubber Dam Clamps Punch Plier Endodontic Supplies and Dental Isolation Tools.

  • MEDICAL GRADE STAINLESS: This Rubber Dam Kit includes 18 pcs, handcrafted with medical grade stainless steel for premium quality and durability. Ideal for dentists and dental professionals..
  • RUBBER DAM CLAMPS: Kit contains 14 Rubber Dam Clamps (# - 00 - 0 - 1 - 2 - 2A - 7 - 8 - 8A - 9 - 13A - 14 - 14A - 212 - 202) to ensure secure fit and lasting memory during dental procedures..
  • RUBBER DAM FRAMES: Includes 2 Rubber Dam Frames designed with perfect balance and flexibility, providing stable dental isolation and enhancing endodontic treatments..
  • PUNCH PLIER INCLUDED: 1 Punch Plier is included for precise and convenient hole-punching on rubber dams. Heat treated for maximum strength and corrosion resistance. Comprehensive Dental Rubber Dam Kit, suitable for endodontic treatments, dental isolation, and oral surgery procedures. Perfect for dental students and professionals..
  • IV STOKE INCLUDED: The kit also features 1 IV Stoke for efficient dental procedures. It is a comprehensive kit that includes essential clamps and accessories for rubber dam procedures. Clamps are designed to resist corrosion and are heat treated for maximum strength. Kit offers perfect balance between strength, flexibility, and "memory.".
Check Stock

RUBEXX Boxing Hand Wraps Thick Knuckle Gel Padded Fist Inner Gloves 36 inches Long Elasticated Wrist Strap Under Mitts Protection Muay Thai MMA Kickboxing Martial Arts Training Bandages Men Women (S)

  • 【PREMIUM QUALITY MATERIAL】These quick wraps are made of with mixed material cotton,Polyester and elastic which is sturdy enough to resist tear cracks and splits. The thick padding doesn’t come down over your knuckles, it sits on the back of your fist. These speed wraps slip on glove design assures a secure and snug fit..
  • 【ULTRA SHOCK ABSORPTION GEL PADDING】Infused with more than 5 inches of knuckle and fist shock-suppression foam to offer the extreme in exclusive form-fit and extraordinary impact resistance and coverage. Gel Mitt’s padding directly over the fist and knuckles, and keeps it from pulling up during training..
  • 【ADJUSTABLE HOOK AND LOOP STRAPS】Fully adjustable 36 inches Straps with a blend of nylon and cotton fabric,providing you the right length and customised fit to support overall wrist coverage. Slips on and wraps up to fit comfortably and securely..
  • 【RUBEXX TOP QUALITY FEATURES】These gel handwraps are Ultra shock absorbing, optimal knuckle wrist fist safety, reinforced elastic stitched around thumb and fingers holes washable, Breathable and Fast dry.
  • 【MULTISPURPOSE】 Boxing MMA, Karate, Taekwondo, muaythai, kick boxing, KravMaga training hand wraps Bandages. These Inner Gloves are the convenient alternative to using....
Check Stock

BAYTORY 65pcs Cable Clamps Assortment Kit, 304 Stainless Steel Thicker Rubber Cushion Wire Pipe Clamps in 7 Sizes 1/4\ 5/16\ 3/8\ 1/2\ 5/8\ 3/4\ 1\

  • High Quality: We have professional production equipment and technical personnel. Cable Clamps made from 304 Premium Stainless steel Material with quality rubber cushioned (EPDM). Salt resistant, antirust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place..
  • Size & Quantity: Cable clamp screw hold diameter: 6.5mm, suitable for 6mm (1/4'') screw bolts and nuts to thread. Cable clamp inside diameter range: 1/4"(15pcs), 5/16"(10pcs), 3/8"(10pcs), 1/2"(10pcs), 5/8"(10pcs), 3/4"(5pcs), 1"(5pcs)(6mm~25mm). Fit for outside diameter range of 1/4"- 1" wiring, lines, hoses or cables to a panel or frame application..
  • Widely Used: Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration. No matter in salt water/air environment..
  • Environmentally Friendly: It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which makes them worked last for years..
  • Package Included: You will receive 65 Pieces cable clamps in compartmenta....
Check Stock

Gorilla Gripper 'GP' 0 to 3/4\ (0 to 22mm)

  • 【High Quality】Stone carrying clamps is designed with heavy-duty solid metal construction and made of high quality aluminum, A3 steel and rubber. These high-quality materials make the carrying clamps more durable and not easily deformed..
  • 【Powerful Carrying Capacity】Granite carrying clamps load up to 660lb/300kg. Opening: 0-2.36in/60mm. The carrying clamps help you to work more efficiently on jobs. These may be used alone or in conjuction with other pairs to move small or large pieces with ease..
  • 【Non-slip Handle & Rubber Pads】The stone lifting tools have fully vulcanized rubber pads which provide added grip and prevent damage to your materials.The non-slip handle make transporting more safer, ergonomically design make it more comfortable to hold..
  • 【Widely Application】The double handed carrying clamps is used for lifting and transporting stone slabs,sheets of glass,granite island marble soapstone,metal sheet,plywood etc.Can be used for rough and smooth surfaces..
  • 【100% Guarantee】Our granite lifting tools come with one year warranty and 24 hours online service. For any reason if you don't like. You will receive a full refund..
Check Stock