Categories

Best Quick Installation Grooved Piping Systems

Everflow Flexible Rubber Pipe Cap 2 inch with Steel Clamps PART #1720

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

Everflow 3952 Flexible PVC Pipe Cap with Stainless Steel Clamps, 3', Black

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

Supply Giant 3942x2 Flexible Pvc PipeCap with Stainless Steel Clamps 2 inch Black (pack of 2)

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dev.) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

PannySewCraft Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More!

  • ►High Quality Premium Sewing Feet From TFBOY.
  • ►Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • ►Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • ► Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • ► Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

VANICE Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • High Quality Premium Sewing Feet From VANICE.
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

Avalon B8BLK Hot & Cold Water, NSF Certified Filter, UL/Energy Star, Black & APEC Water Systems ICEMAKER-KIT-RO-1-4 Ice Maker Installation Kit, 1 Count (Pack of 1), White

  • Product 1: INSTALLATION KIT: Full installation kit consisting of 20' of 1/4" tubing, 3 way plastic 1/4" push connect adapter, under sink 3/8" adapter with shut off valve, filter flushing adapter, and detailed instructions with illustrations.
  • Product 1: DUAL FILTRATION: Dual filters are included with the water cooler. This consists of a Sediment filter and a Carbon Block filter which will last 6 months or 1500 gallons.
  • Product 1: HOT & COLD WATER SPOUTS: When you use our water cooler dispenser you can choose between a Crisp Cold & Piping Hot Output, making it ideal for cool refreshments or toasty beverages.
  • Product 1: BOTTLELESS: Our water cooler is bottle less and will reduce the cost of constant purchases of water. The water is filtered with our dual filtration system consisting of a sediment filter and a carbon block filter.
  • Product 2: Connects APEC Water reverse osmosis systems to refrigerator ice makers for ultrapure water superior to fridge filters.
  • Product 2: Compatible with APEC STANDARD reverse osmosis systems model ROES-50, ROES-75, ROES-PH75, ROES-UV75, RO-45, RO-90, RO-PERM and RO-PUMP and most standard under-counter reverse osmosis systems using ¼” tubing and connectors..
  • Product 2: Enjoy clear, sparkling & delicious ice cubes and RO water a....
Check Stock

Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
Check Stock

Vent Systems Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate for Cooling Heating Ventilation System 8 inches B

  • --High quality-This is our new black 4-inch pipe plastic connector flange for heating and cooling ventilation systems. Used to connect the pipe hose....
  • --Rugged and durable – Our 4-inch flange connectors are made of ABS plastic. This is a high-quality material, known for its toughness and resistance....
  • -Wide range of applications-Our pipe flanges to wall-mounted dryer vents are ideal for piping your tumble dryer, bathroom or kitchen exhaust fans and....
  • --Quick installation-Our 4-inch pipe collar has pre-drilled mounting holes for easy and quick installation. Use 4 M3/M3.5 screws to mount our 4-inch....
  • --Secure Fit-By using our plastic flanges, you can obtain an airtight seal to prevent any cold or hot air from entering your home, thereby reducing....
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock

FORTLUFT Universal Turbo Aluminum Intercooler Piping & Joiner Coupling (Straight Pipe, 3.00''/76mm)

  • Outside Diameter 3.00''/76mm - Wall Thickness 0.07''/1.8mm – Overall Length 23.60''/600mm.
  • Universal, Polished Aluminum, Bead rolled edges.
  • Used in automotive, industrial and marine, such as air intake, cooling systems, turbo intercooler piping.
  • FORTLUFT provides the guarantee for the Universal Turbo Intercooler Piping Aluminum tightness for the 2-year period without any limitation on the mileage after the spare part installation..
Check Stock

Midline Valve PVC Union Coupling Pipe Fitting 2'' Solvent Connections White Plastic (597DV200)

  • ✔LEAK-FREE: Features Secure, Leak-Free Solvent Connections.
  • ✔PIPE CONNECTOR: Connects 2 Solvent Pipes of Equal Diameter Within Your Cold Water Systems.
  • ✔IDEAL FOR JOINING PIPES IN: Landscaping Sprinklers, Pools, Water Park, Aquarium, ETC..
  • ✔PVC PIPING: PVC Piping Systems Feature Improved Performance, Increased Safety, and Better Rust and Corrosion Resistance when Compared with Steel Piping Systems.
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

Happybuy Non-Barrier PEX Tubing 1 Inch X 300 Feet Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating PEX Pipe

  • ...Made of PEX material, non-toxic, crack-resistant, leak-proof. Perfect to at potable water or radiant floor water use..
  • 【SUPERB SEALING】- Non broken design, tackle with different weather circumstance, no matter high temperature or cold days, it will not deform, thus to ensure integrity and safe use..
  • 【EFFORTLESS INSTALLATION】- Send with a pipe cutter & 10 clamps, easily cut pipes to different length and fix them with clamps. Assemble method: Clamp Connection Systems(Cinch Tool + St. Steel Clamps + Crimp Fittings)..
  • 【PREMIUM FLEXIBILITY】- Min.5ft bending radius, easy to bend for different ground situation. Big pressure capacity:188-217psi at 20℃ and 101-108psi at 95℃. Compatible water temperature:-47℉ to 230℉. Thus to ensure its good temperature resistant, crack- & leakage-proof..
  • 【DIVERSE USE SCENARIO】- Suit for radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc..
Check Stock