ElectroCookie Proto Shield Kit Compatible with Arduino Mega R3, Stackable DIY Expansion Prototype PCB (2 Pack)
- Useful in creating your own DIY electronic projects.
- 2 hole strips with power bus lines for quick and easy prototyping.
- 15% larger than other other protoshields for extra components.
- High-quality and Gold-plated finish to prevent oxidation, and all holes are through-plated for mounting strength.
- Lead free and RoHS compliant, Environment-friendly.
Check StockGenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
- Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
- 40 x 10cm (4 Inches) Parallel Adjoined Wires.
- Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
- Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
- For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check StockGenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
- Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
- 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
- Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
- Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
- For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check StockArduino The Official Starter Kit Deluxe Bundle with Make Getting Started The Open Source Electronics Prototyping Platform 3rd Edition Book
- Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source....
- Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback.
- Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart.
- Includes a total of over 200 electronic parts and components.
Check StockJameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R
- Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
- Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
- 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
- Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
- Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check StockJameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R
- Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
- Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
- 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
- Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
- Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check StockJameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R
- Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
- Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
- 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
- Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
- Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check StockJAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774
- Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
- Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
- 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
- Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
- Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock3M Dual Lock Reclosable Fastener TB3550, Black, 1 in x 10 ft, Type 250/250
- Trial bag version (1 in. x 10 ft.) of 3M Dual Lock Reclosable Fastener SJ3550.
- Great for small jobs, prototyping and design evaluation.
- Black, interlocking mushroom-shaped heads (250 stem density per square inch) provide strong, reliable and durable fastening that can be opened and closed multiple times.
- Mates with Type 170, Type 250 or Type 400 to provide different strength combinations.
- Strong fastener secures with an audible snap, verifying closure.
- Features good temperature resistance of 200°F (93°C).
- Five times stronger in tensile than typical hook-and-loop fasteners.
- Durable enough to be opened and closed 1,000 while maintaining 50% of its original strength.
- Mushroom shaped stems snap in place to ensure fastener is engaged.
- eneral purpose acrylic adhesive bonds to metals, glass and medium to high surface energy plastics.
Check StockKEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects
- Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
- The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
- Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
- Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
- MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock
DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects
- 100 % SATISFACTION GUARANTED ★ Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
- 0.1" hole spacing for DIP integrated circuits and headers..
- THIS IS NOT YOUR NORMAL PERF BOARD! ★ This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
- MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
- Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
- THE FLEXIBILITY OF HAVINg CHOICES ★ Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
- PACKAGE COMPONENT ★ 40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
- 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock
Hellotronics Breadboard Jumper Wires, Pack of 130 Pieces More Red and Black Male Female M/F Jumper Wire Cables Square Head 0.1'' 26AWG 5 Colors (10cm/4'' Length, Male-Female)
- HELLOTRONICS BRAND JUMPER WIRES: The REAL 26AWG wires comes with 7 cords x 0.16mm and material in RoHs compliance, makes it more safe to use..
- MORE COLORS AND MORE CHOICES FOR YOU: Each package comes with 5 colors by 20 pieces each, NOW with 30% MORE Red and Black Jumpers for power lines, TOTAL 130 pieces/pack. Hellotronics supplys male to male, male to female and female to female Jumper Wires with length 10cm/15cm/30cm. These Jumper Wires work great with Arduino Breadboards Raspberry Pi and really any 0.1" pitch prototyping boards..
- MAKES PROJECT EASY: Solid quality product that makes quick jumper connections on a breadboard very easy. They will become your go-to for quick connections compatible with Arduino or FPGA board and breadboard..
- PRE-MADE JUMPER WIRES: Their ends are solid, at the right length and proper diameter to fit in the holes of your breadboard. This makes it very easy to build or change configurations on your breadboard..
- WHAT YOU WILL GET: You will definitely receive high quality Jumper Wires, also our worry-free 6-month warranty and friendly customer service..
Check Stock07-13 Silverado or Sierra 1500 Vengeance Rear Bumper
- Side openings allow light options, Retains omen receiver and factory wiring.
- Flexible on-site prototyping capabilities.
Check Stock
