Categories

Best Quick Release Scope Mount

Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount - 2-Inch Offset , black

  • This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle..
  • The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle..
  • This mount positions thecenterof the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base..
  • The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish..
  • Weighs 8.9 ounces. Made with pride in the USA.DescriptionVortex Precision QR Cantilever Mount 30mm 2" offset::Set your sights on the best. The Vortex Precision QR Cantilever Mount is a quick-release cantilever mount that's designed for mounting telescopic sights. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement. Take the performance to a new level with Vortex..
Check Stock

HIRAM Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm

  • QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes.
  • DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy.
  • the torx screws are also heat-treated for added stability and strip prevention.
  • LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting.
  • CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market.
  • we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come.
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • ...ase of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
Check Stock

WindFire Tactical Red LED Light Flashlight 300 Yards Zoom Focus Adjustable Torch Coyote Hog Fox Predator Varmint Hunting Lamp Sets with Pressure Switch Scope Mount

  • Tactical Portable Red Light Focus Adjustable Single 1 mode LED Flashlight Best High Lumens CREE Red Light - Water & Shock Resistant - Ideal for....
  • Unfiltered Red light output produced by Cree Red LED. 150-300 yards long distance bright Light with Flood and Spot beam which helps you find your game....
  • Cree LED has long service life up to 100,000 Hours..
  • Equipped with quick mount and release Scope mount and Remote Pressure Switch. With Momentary on pressure switch and On/Off push button switch. High....
  • Completed hunting Set: 1x Red LED hunting light flashlight, 1x pressure switch, 1x Quick Release Scope Mount.
Check Stock

WINDFIRE Green LED Light 300 Yards Tactical Flashlight Zoomable Spot Flood Light Torch Coyote Hog Fox Predator Varmint Hunting Lamp Kits with Pressure Switch Scope Mount

  • Tactical Portable Green Light Focus Adjustable Single 1 mode LED Flashlight Best High Lumens CREE Red Light - Water & Shock Resistant - Ideal for....
  • Unfiltered Green light output produced by Cree Red LED. 150-300 yards long distance bright Light with Flood and Spot beam which helps you find your....
  • Cree LED has long service life up to 100,000 Hours..
  • Equipped with quick mount and release Scope mount and Remote Pressure Switch. With Momentary on pressure switch and On/Off push button switch. High....
  • Completed hunting Set: 1x Green LED hunting light flashlight, 1x pressure switch, 1x Quick Release Scope Mount.
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ... Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
  • ✌【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..
Check Stock

Sks, Aks, Ak-47 Owner's Manual

  • 【Light-weight & Metal Side Rail Mount】：RTMGOB side rail mount, made of premium aluminum alloy, CNC-machined, finished and anodized, solid and durable to mount on 47 model.
  • 【Quick Detach Side Scope Mount】:The side scope mount can be quick detached from side plate receiver. Desiged with a quick-detach lever and spring-loaded adjustment part. Press on the lever button lower part for quick unlocking the mount while move the lever to another side. Then press the spring-loaded part and roll out the screw to detach the scope mount, no tools needed.
  • 【Side Picatinny Rail Mount】: The side mounted rail is standard picatinny rail for mounting red dot, sights, optic scope, flashlight, and other tactical optic accessories. The side rail mount has 17 rail slots and 8 drilled holes, covenient for mounting red dot scope, and allows sight cowitness.
  • 【Easy-to-mount Side Mount】: The scope mount can be easily mounted on 47 model. Before mounting, pull the lever upward, slide onto the side plate, tighten the scope mount by pressing the spring-loaded part and rotating the screw to adjust tightness, and finally push the lever to the right to lock the mount. The mount once settled stably and tightly, would not slipping off and shaking.
Check Stock

Tydeux 1' and 30mm High Profile Quick Release Scope Mount Rings for Weaver and Picatinny Rail - Pack of 2

  • 【SIZE AND RAIL】1" and 30mm high profile quick release scope mount rings fit for weaver picatinny rails. Add or remove the internal rings in order to switch from 1" and 30mm diameter. Perfect for mounting most scopes which are in 1"/ 25.4mm scope tube.h from 1" and 30mm diameter. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • 【HIGH QUALITY】Precision-machined with matte black anodized aluminum, sturdy and lightweight construction, high quality, sturdy construction, build no wobble, offer durable safe performance in the field..
  • 【EXCELLENT PERFORMANCE】The product is very light and easy to carry. Excellent materials, while maintaining strong and light weight, provide excellent waterproof performance.The product can still work normally in humid and harsh environment. But when not in use, please store it in a dry and cool place..
  • 【SUBTLE DESIGN】Built-in tape protection, built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding position accurately. With four screws design, it will hold the scope more securely..
  • 【EASY INSTALLATION】Ergonomic and quick detach fold-over clasp off to the side of scope rings help strengthen t....
Check Stock

Odepro KL52IR-Pro 850nm IR Illuminator Flashlight Focus Adjustable Infrared Scope Mounted Hunting Light Torch with Stepless Dimmer Cable Switch, for Night Vision, Coyote Hog Predator Hunting

  • 1312ft beam distance: KL52-IR has a built-in powerful upgraded version IR850nm flashlight which can reach 1312ft(400m) irradiation distance through a night version..
  • Stable and Zoomable Lamp: Rotate the lamp head smoothly to zoom in and zoom out, we promise that the torch lens and lamp head are really tightly, never become loose!.
  • Dimmable remote switch: The purpose built remote cable switch can adjust brightness from 0% to 100% continuously without presetted modes. What’s more, the button is absolutely silence, No noise at all!.
  • Quick release scope mount: Comes with a quick release scope mount, you can install or uninstall the light easily and quickly..
  • Longer runtime: 2 batteries packed with the tool box, no worry about the power supply outside at all..
Check Stock

Leupold Rifleman Scope Rings

  • Designed with Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability.
  • Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets.
  • Patent-Pending Quick Release (QR) Mount Features Tool-free Tension Adjustment, Locking Quick Release Levers, and Squared Recoil Stops.
  • Precision CNC Machined from Aircraft Grade Aluminum with a Matte Black Anodize, Designed to Fit on MIL-STD-1913 Picatinny Rail Platform.
  • 15mm Saddle Height, 32mm Center Height, Fits 34mm Tube Optics with an Objective Outer Diameter up to 64mm.
Check Stock

Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance and Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454

  • EASE OF USE: L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.
  • VERSATILITY: Easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
  • Kit includes:Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
Check Stock