Categories

Best Quick change Tap Holder

hygger 3 in 1 Aquarium Filter, 60GPH Fish Tank Power Filter for Water Change, Filtration and Landscaping with Water Hose, Filter Plates Cartridge, Sponge Filter Box

  • ③Then water passes through the sponge filter box again.
  • ④ Clean water enters the filter inside, ⑤Then by water pump flows out through front outlet or rotatable outlet tap..
  • WATER CHANGE FUNCTION:Our Innovative water exchange design allows for quick and easy water changes. Rotate the outlet tap to change the water out of the tank by the included hose(47.2in). But only part of the water can be replaced. hygger fish tank filter meets the scientific fish farming, all the water will not be pumped away, allowing the fish to adapt..
  • ⛲LANDSCAPING & OXYGENATION: ①Pull out the outlet tap.
  • ③ Install the fountain accessory head on the water change tube. After plugging in the power, aquarium filter will be an effect similar to a small fountain. The flow of water will also increase dissolved oxygen in the aquarium..
  • PRODUCT PARAMETERS: Power of water pump:110V 60Hz 3W.
  • Filter material:3 layers of filter plates(activated carbon) and sponge filter. Mechanical and biological filtration cycles more than 6 times....
Check Stock

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

  • ... processing steps and time costs, improve working efficiency.
  • [Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund.
Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

  • [What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...uilt-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Designer (feat. CG Vonny & Escoleone) [Explicit]

  • - Huge base of live pictures UHD, HQ, HD, 1080p and 4K.
  • - Double tap to change the live wallpapers on any screen..
  • - Set live wallpaper source as your own wallpapers i.e change wallpaper source in settings..
  • - Can change setting of any screen individually or as a whole..
Check Stock

LED Puck Lights with Remote Control, Battery Operated Wireless Closet Lights, Under Cabinet Lighting Stick on Tap Push Lights, Color Changing Under Counter Lights for Kitchen, 6 Pack - Black

  • AA Battery Operated - No wiring needed, safe and convenient, each puck light need 3 AA batteries(not included), high brightness 100 lumens maximum to lights up every dark corner of your house..
  • Flexible Installation Ways - Use our new style removable & traceless double-sided adhesive pads to stick on any smooth surfaces in seconds, or fix them with the screws when necessary..
  • Tap & Remote Control - Short press the lens to turn on & change light color, long press (2 seconds) to turn off. Use the remote to customize your favorite light color among 16 static light colors and 4 dynamic light modes, quick set the brightness level to 30%, 70%, 100%..
  • Auto-Off Timer - To extend battery life, the default timer is 2 hours, if you leave them alone, they will stay on for 2 hours and turns off automatically. Also you can one-time set the timer among 30, 60, 180 or 360 minutes with remote controller..
  • Remote Control Holder - Comes with 1 wall mount remote control holder which can hold 2 small remotes, mount the holder near the lights, make it easier to store the remotes and easier to find them, no worries missing remote anymore..
Check Stock

TOPEC Tap Bit Set, 3-in-1 HSS Titanium Coated Drill Tap Combination for Titanium Coated Drill Tap Combination, 13 PCS SAE/Metric threading tap drill bit set with 1/4 Inch Hex Shank, and Quick-Change Adapter

  • ...k taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a portable storage case you can carry and keep the drill neat and tidy..
  • ❤【WIDE APPLICATIONS】These tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Hex Shank quick change adapter（with lock function）can fit into most power tools more easily and securely for tapping in most materials. （Please consult before using metals with too much hardness !）.
  • ❤【13PCS SIZES&PREMIUM SERVICE】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC.
  • 6 metric：M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • 1 piece-quick change adapter.If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • ...e wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...uilt-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

COMOWARE Titanium Impact Drill Bit Set - 30 Pcs Hex Shank HSS, Quick Change Design, 1/16"-1/2"

  • HSS Titanium Coating - Classic HSS construction with titanium coating for capability and durability. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean..
  • Flutes Form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process..
  • Quick Change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
  • Meet Your Demands - Great drill bits set for metal/wood/plastic countersink. Suitable for Home DIY, and General Building/Engineering Use..
  • Organized Holder - This 30-piece set includes 29 drill bits and 1 quick-change adapter. A drill bits holder with size index is included in the set for easy storage and organizing. Sizes include 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"..
Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
  • This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
  • Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check Stock

SUNJOYCO 69pcs 2 inch Quick Change Roll Lock Sanding Discs Set, Surface Contidioning Discs 1/4\ Pad Holder for Sander Die Grinder Accessories Sanding Disc Grind Deburr Strip Grind Polish Rust Removal

  • VALUE KIT: 39 aluminum oxide discs (40#/60#/80#/120#/180#/240#), 12 nylon SiC sanding discs (60#/80#/120#), 12 zirconium oxide discs(coarse/medium/fine), 2 black sanding discs,1 Flap Disc, 1 Wool Disc,1 disc pad holder in 1/4". Totally 69 Pcs. With this 2-inch quick change sanding disc set, surely it will meet your many needs.
  • SECURE FIBER COVER: The quick change discs with special fiber as the base and Zirconia/Silicon Carbide/Ceramic/Aluminium Oxide/Zirconia Black Strip/Compressed Wool as the grinding grain, it shows excellent performance on any kind of surface..
  • QUICK CHANGE & STABLE DESIGN: There is a safe torque spiral on the grinding disc, you can easily spirally connected to the holder, providing ultra-stable and accurate surface grinding. The safety design saves you from worrying about falling off when using..
  • WIDELY USED: Our quick change disc is perfect for the surface prep, finishing, deburring and polishing of wood, plastic, pipes, carbon steel, cast iron, titanium, aluminum, brass, bronze, copper, or hardwoods as well as heat-sensitive materials such as stainless steel, nickel alloy or cobalt alloys..
  • HIGH COMPATIBILITY: With the 1/4" discs pad holder, this 2 inch quick change sanding discs set can be attached to 1/4 collet die grinders, rot....
Check Stock

Kastar 971 SAE and Metric Thread Restorer Kit

  • PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.).
  • EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive..
  • DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
  • EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work e....
Check Stock