Categories

Best Rack And Pinion Hose Fittings

SuperATV Heavy-Duty RackBoss Rack and Pinion for 2013-2019 Polaris Ranger XP 900/2014-2019 Polaris Ranger XP 900 Crew - 65% Larger Housing | Internal Teflon Bushing | Easy Bolt-On Design

  • ...laris Ranger XP 900 Highlifter Edition Note: Replaces OEM Part 1823902 and 1824446.
  • 【Fits】2013-2019 Polaris Ranger XP 900 / 2014-2019 Polaris Ranger XP 900 Crew / 2016 Polaris Ranger XP 900 Highlifter Edition Note: Replaces OEM Part 1823902 and 1824446.
  • 【Rider Tested and Approved】 SuperATV's RackBoss Rack and Pinion housing has 65% more material giving you added strength where it's needed most - no more cracked housings! Utilizing a 15% bigger steering gear rack and a wear-resistant Teflon bushing, RackBoss showed no sign of wear or fatigue after 50,000 strokes compared to competition showing obvious wear at 30,000 strokes..
  • 【Heavy-Duty Materials】 With our SuperATV Polaris Ranger XP 900 accessories, you can count on heavy-duty, well-constructed parts. We've increased the tie rod bearing size for increased strength, constructed the mounting plates of 5mm thick carbon steel, and included 10.9 grade hardware and internal Teflon bushings..
  • 【Easy Install】Our Rack and Pinion kit uses an easy bolt-on design for a complete end-to-end Rack and Pinion Steering Assembly that requires no modification. Scan the included QR code or visit SuperATV's website for installation instructions..
  • 【SuperATV】SuperATV is a family-owned/operated business an....
Check Stock

Powermatic PM701 3/4-HP Bench Mortiser (1791310)

  • Easy and open access to drill chuck for bit changing.
  • Large cast-iron base with center through hole.
  • Adjustable rack and Pinion fence and rack and Pinion head raising and lowering.
  • Mortising head column can be turned 180 Degree and remounted for off-table mortising.
  • Adjustable dovetail way on mortising head.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • ...liper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Brake Pads 003e All Hardware To Install.
  • Parking Brake Cable Kit: 003e Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit: 003e Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines 003e Also includes weld-on line tabs | Hard Line Kit: 003e Steel hard brake line tubing to connect the chassis fittings to the included rubber hose 003e Rubber hose connects those hard lines to the line on the frame.
Check Stock

Grizzly Industrial G0701-19 5 HP Ultimate Bandsaw

  • Blade tension indicator quick change blade release/tensioning with blade tracking window.
  • Deluxe cast iron fence with extruded aluminum re-saw fence w.
  • Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table.
  • Fence adjusts for blade lead includes scale magnifying window and 1-Inch blade.
  • Micro adjusting rack and pinion table tilt and height scale measurement.
  • Miter gauge foot brake stop rack and pinion upper guide adjustment and 4-Inch dust port x 2.
Check Stock

Detroit Axle - Complete Electronic Steering Rack and Pinion Assembly Replacement for Chevy Cobalt HHR Pontiac G5 & Saturn Ion

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (1) Complete Electronic Steering Rack & Pinion Assembly.
  • you must send in your core unit. Call us when you order to get a return shipping label for your old unit..
  • ALL ELECTRONIC RACK AND PINIONS MUST BE INSTALLED BY A DEALERSHIP OR PROGRAMMED TO YOUR VEHICLE. FAILURE TO NOT PROGRAM RACK AND PINION TO YOUR....
Check Stock

Detroit Axle - Complete Electronic Rack and Pinion Assembly Replacement for 2011-2014 Ford F-150 Excludes SVT Raptor, Heavy Duty Towing Package

  • Replacement for 2011-2014 Ford F-150 Excludes SVT Raptor, with Heavy Duty Towing Package.
  • Kit Includes: (1) Complete Electronic Steering Rack and Pinion Assembly.
  • ALL ELECTRONIC RACK AND PINIONS MUST BE INSTALLED BY A DEALERSHIP OR PROGRAMMED TO YOUR VEHICLE. FAILURE TO NOT PROGRAM RACK AND PINION TO YOUR VEHICLE, WILL CAUSE THE RACK TO NOT WORK PROPERLY. PROGRAMMING TO YOUR VEHICLE IS REQUIRED..
  • To Activate your Lifetime Warranty, you must send in your core unit. Call us when you order to get a return shipping label for your old unit.
  • Remanufactured in Detroit, USA - Lifetime Warranty.
Check Stock

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

  • INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
  • FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
  • HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
  • FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
  • QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

  • Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
  • Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
  • Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
  • Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
  • Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock

Dr.Acces EZGO TXT MPT Steering Gear Box Assembly for 2001 & Up Golf Carts OEM 70964-G01

  • Rack and Pinion |Steering gear box assembly for EZGO TXT, RXV, MPT electric and gas golf cart models 2001 & up.
  • Fits golf carts with steering boxes attached to the front axle.
  • EZGO OEM reference numbers: 70964-G01,70964-G02, 70602-G01，70964G02,70964G01.
  • One piece complete Rack and Pinion Unit, please find bom listing from picture.
  • Easy install, contact us if any question, return and replacment freely..
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

Garden Hose Washers Pack of 10. Made from Heavy Duty Rubber. Self Locking Tabs Keep Washer Firmly Set Inside Fittings

  • Gardenite hose washers are made from heavy duty thermoplastic rubber construction..
  • These heavy duty rubber hose gaskets fit all standard 3/4" garden hose fittings..
  • Designed with 4 small outer tabs to keep washers in place and properly seated. This prevents washers from falling out of the hose fittings..
  • The Gardenite heavy-duty rubber hose washers fit all standard female garden hose fittings..
  • Each heavy duty rubber gasket has external diameter of 1 inch, the internal diameter is 5/8 inches and the thickness is 1/8 inches..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
  • Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock