Categories

Best Rackmount Receiver Amplifiers

Bietrun UHF Wireless Microphone Headset 165ft Range Working Time 6H 1/4 Plug Wireless Headset Mic ＆Handheld Mic 2 in 1 for Karaoke Speaker Amplifier Mic Speakers PA System Teaching Fitness

  • ...ophone headset system: Only for Mic Jack, not Aux Jack, otherwise no sound ●Built-in high sensitivity condenser microphone, transmission distance upgrade to 160 Feet (50m) ●Signal Stability●No Delay●No Radiation ●Anti-Howling ●Anti-Jamming ●Constant Frequency ●Clearer Sound Quality. Compatible voice amplifiers, multimedia. It is a portable Karaoke equipment.(Excludes Amp＆Not supported Iphone, bluetooth speaker, PC and Laptop) ●Obtained by FCC test..
  • Easy to use: Please turn on the transmitter and receiver power switches, the blue light will flash for approximately 2s. Indicator light stops flashing after a successful match, then you can use it. No further operation. ●Headset and handheld is 2 in 1 design, easily change the handheld mode to headset mode to meet your needs. Not supported Android Phones, Iphones, Macbooks, Laptop, Bluetooth Speaker..
  • Charge and work of wireless microphones: The transmitter and receiver are built-in 400 mah rechargeable lithium-ion batteries that can offer about 6 hours working time. ●Usb cable has two micro USB V2.0 to charge for the transmitter and receiver simultaneously. Fully charge is only 2.5 hours. ●Perfect Application: The plug on the receiver is 3.5mm. For 6.35mm amplifiers, please use t....
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • ...t works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of applications, from day-long presentations to nighttime performances..
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • ...t works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of applications, from day-long presentations to nighttime performances..
Check Stock

Sennheiser XSW 2-835-A Wireless Handheld Mic System with e835 Capsule, Wireless Mobile Pack & Charger (4X AA Batteries) Bundle

  • Excellent live sound featuring renowned evolution microphone capsules.
  • True diversity receiver with metal housing and External antennas.
  • Fully tunable over a wide range of UHF frequencies with up to 12 simultaneous channels.
  • Automatic frequency management and synchronization, Power supply: 2 AA size batteries, 1.5 V.
Check Stock

Performance Teknique ICBM-892 2 Channel Amplifier 1200W MAX

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems AR2000M Monoblock Car Amplifier - 2000 Watts, 2-4 Ohm Stable, Class A-B, Mosfet Power Supply, Gray

  • Power - 2000 watts Max X 1 @2-ohms, 1000 watts Max X 1 @4-ohms.
  • Class A/B topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
  • Low/high level inputs - a low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Variable low-pass Crossover - subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Variable bass Boost - bass Boost allows you to adjust the low bass within the boost Range to just the way you like it.
  • Variable gain control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Dimensions - 13.13 x 6.5 x 2.8, weight - 3.81 lbs. It can be installed in a variety of different places due to its slim and Compact design.
  • Warranty - BOSS Audio provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.Com. We strongly encourage professio....
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-8 8000W Rms)

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Sunbuck Wireless Bluetooth Audio Amplifiers, 200W Power Home Stereo Amplifier Receiver, with USB, SD Card, FM Radio, Remote Control, Dual Channel Sound, for Theater Entertainment Studio Use(AS-35BU)

  • ...rge Power】Sunbuck 2 channel Bluetooth stereo amplifier receiver provides the P.M.P.O(Peak Music Power Output) can reach 200W/100W x 2(RMS 2x40w@4OHM), which is perfect for your karaoke and home theater acoustic sound system, Let you enjoy high quality amplified audio..
  • 【5 Input Optional】Sunbuck Audio Component Amplifiers support USB/SD card/FM Radio/ Bluetooth and various external sources RCA(R, L) audio input for tuner, CD player, tape deck and so on.USB 2.0 Mode, DC 12V and AC 110V Input.SD,USB only support MP3, WAV, WMA, APE, PLAC format..
  • 【wireless Bluetooth Connection】The sound amplifying mixer device is equipped with Bluetooth wireless music streaming w/ 40+ ft wireless range. Works w/ today’s latest devices including smartphone, iPad, iPhone and computer w/ hassle-free receiver pairing..
  • 【EQ Control】The improved professional compact bookshelf sound amplifier features crisp, responsive buttons for mode controls. Rotary knob controls for mic echo / volume, balance, bass, treble, master volume, input source and the unique folder/track.Remote control only for volume not for full control..
  • 【100% Satisfactory Guarantee】Our Wireless Bluetooth Stereo Audio Amplifiers support 6-month warranty, we provide the best customer service. If th....
Check Stock

BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers

  • Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
  • Class A/B Topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 11.5 x 10.44 x 2.25, Weight 7.....
Check Stock

Shure SLXD24D/SM58 Dual Channel Wireless Microphone System with 2 SM58 Handheld Mics

  • ...lect works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • WHAT'S IN THE BOX: (2) SLXD2 handheld transmitter with legendary SM58 cardioid dynamic microphone capsules and (1) SLXD4D dual-channel receiver, with antenna and rackmount accessories, (2) zippered bag and (4) AA batteries.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • BATTERY LIFE: Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) ....
Check Stock

Supersonic SC605 Durable HDTV Indoor Antenna

  • Supports HDTV 1080p, 1080i, 720p Broadcast.
  • Receives Free Local Digital and Analog TV Broadcast Signals.
Check Stock

Niles SS-6 Speaker Selector

  • Protection circuit safeguards receiver/amplifier.
  • Separate left and right ground paths for compatibility with all amplifiers.
  • Removable connectors accommodate up to 14-gauge wire.
Check Stock

Brute Magnetics | 2400 lb Pull Force Huge Rare Earth Neodymium Fishing Magnet | 4.21' Double Sided Powerful Magnet, Eyebolts + Threadlocker | Strong Magnets for Fishing in Lakes or Rivers

  • Power - 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Specs - Dimensions: 11.5” x 10.44”....
Check Stock