Categories

Best Radial Rings

FAG NU313E-TVP2-C3 Cylindrical Roller Bearing Single Row Straight Bore Removable Inner Ring High Capacity Polyamide Cage C3 Clearance 65mm ID 140mm OD 33mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

FAG NU204E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, C3 Clearance, 20mm ID, 47mm OD, 14mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

Timken Tapered Roller Bearing Cone - 59201

  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing.
  • Supports both radial and axial loads between a rotating and non-rotating member.
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F).
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open configuration for lubrication applied in place.
Check Stock

Peer Bearing 6205 6200 Series Radial Bearings, Open, 25 mm ID, 52 mm OD, 15 mm Width

  • This series is available with shield, Buna N Seals, or locating rings.
  • The honed raceways offer a perfectly balanced bearing capable of operating under straight radial, thrust or combination loads.
  • Package Dimensions: 1.27 L x 7.62H x7.62Wcentimeters.
Check Stock

INA SL182206 Cylindrical Roller Bearing, Single Row, Removable Outer Ring, Semi-Fixed, Flanged, Normal Clearance, Open End, Metric, 30mm ID, 62mm OD, 27mm Width, 6500rpm Maximum Rotational Speed, 19100lbf Static Load Capacity, 19600lbf Dynamic Loa...

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

Pentek 153070 #20 Big Blue Housing Sump

  • COMPATIBLE WITH ANY 20" x 2.5" standard sediment or carbon filter cartridge.
  • ELIMINATE THE NEED FOR EXTERNAL SHUT-OFF VALVES - the internal valve-in-head allows both inlet and outlet ports to be simultaneously shut off with a turn of the handle.
  • PRESSURE RELIEF BUTTON on the inlet side to relieve pressure inside the housing when changing filter cartridges.
  • RADIAL SEALING O-RINGS AND SEALING SURFACES are continuously cleaned each time the valve is used, ensuring leak-proof operation.
  • OPAQUE SUMP HOUSING MOLDED FROM RUGGED REINFORCED POLYPROPYLENE offers outstanding chemical compatibility and is ideal for use in a variety of low-flow applications.
Check Stock

BrightDeal Replacement Toothbrush Heads Compatible with Philips Sonicare Toothbrush Electric Handle, for Sonicare E Series Essence, Xtreme, Elite, Advance and CleanCare Toothbrush, 6 Pack

  • HIGH COMPATIBILITY - Compatible with Philips Sonicare electric screw-on e series toothbrush handles.
  • HEALTHY & SAFETY STANDARD - High standard approved BrightDeal toothbrush heads are made at the highest health and safety standard.
  • GREAT QUALITY - BrightDeal toothbrush heads are proven to reduce more gingivitis than a manual toothbrush. Advanced bristle and slim angled neck can reach hard-to-clean area.
  • ANGLED RADIAL-TRIMMED BRISTLES: the curved bristles' surface maintains contact with the gum and teeth.The brush head pivots, cover much larger area.
  • SEALED PACKAGE - You will receive your sealed brush heads in BrightDeal branded Package. Different Colored Rubber Rings: 2 Green, 2 Purblish Red & 2 Dark Grey rubber rings, good for two or more people in family to use.
Check Stock

Timken 59162 Tapered Roller Bearing Single Cone Standard Tolerance Straight Bore Steel Inch 1.6250 ID 1.4375 Width

  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing.
  • Supports both radial and axial loads between a rotating and non-rotating member.
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F).
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open configuration for lubrication applied in place.
Check Stock

Timken 59200#3 Tapered Roller Bearing Single Cone Precision Tolerance Straight Bore Steel Inch 2.0000 ID 1.4375 Width

  • Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing.
  • Supports both radial and axial loads between a rotating and non-rotating member.
  • Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F).
  • Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open configuration for lubrication applied in place.
Check Stock

2 Pcs Hybrid 6806 Ceramic Bearing 30x42x7mm 6806-2RS Si3N4 Ceramic Ball Bearing for Racing Bike Wheel BB30

  • Dimensions: 30mm(ID.) x 42mm(OD.) x 7mm(T.).
  • Balls Material: Black Si3N4 Ceramic/Cage: Nylon Cage/Rings: Steel ABEC-5.
Check Stock

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

Mickey Thompson ET Street R Racing Radial Tire - P275/50R15

  • Mickey Thompson ET Street R Racing Radial Tire - P275/50R15.
  • Tubeless “Radial Pro” technology to provide the ultimate traction.
  • Minimal tread void for the ultimate dry traction.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock