Categories

Best Radiating Fan

SoundOriginal 12V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (12v Dual Ball Bearing 2pack)

  • Cooling Blower Fan 12vdc 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (2Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature..
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans.
Check Stock

SoundOriginal 12VDC Brushless Blower Cooling Fan 50x50x15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (x1 12V)

  • DC 12V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (1Pack).
  • Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5500 RPM.
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5500 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sleeve Bearing.
Check Stock

SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.06A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement

  • Cooling Blower Fan 12vdc 0.06A~0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (2Pack).
  • Bearing: Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM.
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing.
Check Stock

SoundOriginal 24V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (2pcs 24V)

  • DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • pc cpu server cooling dissipation and so on—Repair Replacement (2Pack).
  • Bearing. Pure copper bearing made in Japan. Guaranteed to continuously run 20,000 hours under normal temperature. Speed: 5100 RPM.
  • Total Size : 5 x 5 x 1.5cm /2″ x 2″ x 0.6 ” (L*D*H).
  • Outlet Size : 2 x1.5cm/0.8″ x 0.6″(L*W) Cable Length : 25cm/9.8″.
  • This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable..
  • Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Sper fan | Speed: 5100 | Total Airflow: 6.5 CFM | Air Pressure: 8.90mmH2O | Total Noise: 36.5 dBA | Bearings: Sale price $11.49 Sleeve Bearing.
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Dyna-Glo IR12PMDG-1 12,000 BTU Liquid Propane Infrared Vent Free Wall Heater

  • Liquid Propane Ready (Field Conversion Not Permitted).
  • Infrared Technology works by radiating heat to warm objects first - Similar to the sun.
  • 6,000-12,000 BTU's/hr variable heat output for up to 300 sq. ft..
  • Variable control knob offers the most customizable heat settings LOW - 6,000 BTU HI - 12,000 BTU.
  • No electricity required allows for reliable back-up heating incase of an emergency situation.
  • Separately sold optional fan (WHF100) improves the amount of square footage the heat reaches in a quiet, yet powerful way!.
  • Separately sold optional base legs (WBL100) allows for stable floor mounting.
Check Stock

Dyna-Glo IR18NMDG-1 18,000 BTU Natural Gas Infrared Vent Free Wall Heater

  • Natural Gas Ready (Fuel conversion not permitted).
  • Infrared Technology works by radiating heat to warm objects first - Similar to the sun.
  • 6,000-18,000 BTU's/hr variable heat output for up to 700 sq. ft..
  • Variable control knob offers the most customizable heat settings LOW - 6,000 BTU MED - 12,000 BTU HI - 18,000 BTU.
  • No electricity required allows for reliable back-up heating incase of an emergency situation.
  • Separately sold optional fan (WHF100) improves the amount of square footage the heat reaches in a quiet, yet powerful way!.
  • Separately sold optional base legs (WBL100) allows for stable floor mounting.
Check Stock

Auxbeam 9005 H11 5202 LED Bulbs 24000 Lumens HB3 H9/H8 5202 LED Light Bulbs Combo Package Fog Light Halogen Replacement 6500K, Pack of 6

  • All-in-one combo, this comes with a pair of 9005/HB3 and a pair of H11, 5202 Fog Light/ Halogen replacement (36W per bulb) 4000lm/bulb, total get 6 pieces LED bulbs set.
  • Operating Voltage: fit 12V vehicles Operating Temperature: -40-80 degree Celsius. Above 50,000 hours life time, Made from high quality material for long lasting durability.
  • Xenon white light reflect road paint/signs better to show clearer road situation. 9005 H11 5202 Led Bulb Built-in constant current CPU, instant full brightness without start-up relay.
  • All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature. Built-in constant current CPU, instant full brightness without start-up relay.
  • Two-way heat dissipation channel:1.All-in-one aluminum profile as heat conduction system, 360 degree heat radiating. 2.High speed mute fan(12000R/Min), high Air flow for faster cooling rate.
Check Stock

LABLT 2Pcs 9008/H13 LED Headlights Bulbs 80W Replacement for Polaris Ranger RZR 570S 800S 900S 1000 XP

  • Low beam angle with cut-off line,will not dazzle oncoming traffic,Xenon white light reflect road paint/signs better to show clearer road situation..
  • Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light..
  • 2pcs/set H13/9008 Hi-Lo Beam LED headlight conversion kit..
  • Two-way heat dissipation channel,All-in-one aluminum profile as heat conduction system, 360 degree heat radiating,High speed mute fan (12000R/Min),high Air flow for faster cooling rate..
  • Built-in constant current CPU,instant full brightness without start-up relay..
Check Stock

25.2V Battery Charger 25.9V 24V Output 29.4V 2A 3-Pin XLR Male Connector for 7 Series Li ion Battery

  • Output: 29.4V 2A DC charger24V 23.9V 29.2V 25.2V 2A.
  • prevent unsafe and abnormal conditions / Over Temperature / Short Circuit Protection/ Over current Protection/ Over Voltage Protection.
  • 105℃ Output Capacitor, Global Applicable AC Input Voltage, High Efficiency, Soft Starting Current, Reduced The Impact Of AC Input Effectively, small....
  • The charger have fan with simply built-in, can absorb dust and pile up easily then get burn. Our fanless design have a strong built-in ,with radiating....
  • The Case is made by High-quality plastic, smooth appearance, have no impurities..
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

50.4V 1.5A Charger Input 110-220V for DIY 12S 44.4V 43.2V 49V Battery Charger

  • Input: 100-240VAC,50/60Hz, Output: 50.4V 1.5A Power..
  • 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking..
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable..
  • The Charger protected: Short circuit protection/ over current protection/ over voltage protection.
  • red light -- charging, green light -- charge OK, it stop automatically when the battery is full..
  • Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you.
Check Stock