Categories

Best Radius Gauge

Wokape 6Pcs 5 Sizes Stainless Steel Radius Gauge with Feeler Gauge Kit, 5 Sizes Metric and Imperial R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 Arc Fillet Concave Convex Gap Measuring Tool

  • 【What You Get】 ------ In this kit, You will get 5 different Sizes Stainless Steel Radius Gauge, Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 , Each sizes has 1Pcs. These Radius Gauge can meet all your various need. With Stainless Steel Feeler Gauge Dual Marked Metric (0.04-0.88 mm, 32 Blades)..
  • 【High Quality】 ------- This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust. There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that..
  • 【Stainless Steel Radius Gauge Excellent Design】------- The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
  • 【 Stainless Steel Feeler Gauge Sizes 】------- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88. Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..
Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

  • 32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
  • 9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
  • 4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
  • 2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
  • 1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
Check Stock

OriGlam R0.3-1.5 Radius Gauge Set, Stainless Steel Metric Radius Gauge Fillet Gage, Portable Concave Convex Measuring Tool for Tool and Die Makers Check

  • 【High Quality】All the radius gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance..
  • 【Measuring Range 】R0.3-1.5mm is 0.3/ 0.4/ 0.5/ 0.6/ 0.7/ 0.8/ 0.9/ 1.0/ 1.1/ 1.2/ 1.3/ 1.4/ 1.5..
  • 【Scope Application】This radius gauge is widely used in home improvement, machine installation, Electric equipment, Suitable for tool and mold manufacturers, Mechanics and many other workers to check the tool radius of the meter, Measure the thickness or width of screw, Valve, Bearing ect..
  • 【Easy to use】: The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need..
  • 【Application】They measure accurately and have almost no errors, will help you quickly and easily check the radius of tools. Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..
Check Stock

Holmes Bronze Series 8 ft. x 7 ft. White Garage Door with Plain Windows

  • Garage Door Tracks 2" Horizontal with 15" curved radius with .075 (color-coded green) gauge steel for 7' high doors. Includes curved tracks, horizontal tracks, and Angles. Nuts, and bolts are NOT INCLUDED.
  • Completely compatible with the lighter .055 or .060 gauge tracks, but are heavier duty. They do not bend or wear as easily.
  • IMPORTANT: When ordering horizontal tracks be sure to verify the track radius. If you order tracks with the incorrect radius the radius will not be returnable because the cut of each radius is unique to the straight track and angle. If you are installing new tracks on a door, you can follow this general rule for selecting the horizontal track radius. For 15" radius tracks, you will need 15" of headroom, the distance from the top of the door to the lowest part of the ceiling..
  • UNIVERSAL FIT: This set of left and right door top section tracks fits 2-inch roller garages. The universal garage track set is ideal for most American garage doors of up to 7-feet tall and is compatible with most brands, including Amarr, Clopay, Chi, Midland, North Central, Garaga, Overhead Door, Ideal, and Ray Nor, Wayne Dalton, and more.
  • Scope of application: sliding garage door, sectional lift garage door, electric garage door, remote garage door, st....
Check Stock

Glarks 4 Pack R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25 Radius Gauge Set, Stainless Steel Radius Fillet Gage Portable Concave Convex Measuring Tool for Tool and Die Makers Check

  • ★【What You Get】: In this radius gauge set, it include 4 pack radius fillet gage which measuring range are R0.3-1.5mm, R1-6.5mm, R7-14.5mm, R15-25mm. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the radius gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust and corrosion..
  • ★【Measuring Range Detail】: R0.3-1.5mm is 0.3/ 0.4/ 0.5/ 0.6/ 0.7/ 0.8/ 0.9/ 1.0/ 1.1/ 1.2/ 1.3/ 1.4/ 1.5.
  • R1-6.5mm is 1/ 1.25/ 1.5/ 1.75/ 2/ 2.25/ 2.5/ 2.75/ 3/ 3.5/ 4/ 4.5/ 5/ 5.5/ 6/ 6.5.
  • R7-14.5mm is 7/ 7.5/ 8/ 8.5/ 9/ 9.5/ 10/ 10.5/ 11/ 11.5/ 12/ 12.5/ 13/ 13.5/ 14/ 14.5.
  • R15-25mm is 15/ 15.5/ 16/ 16.5/ 17/ 17.5/ 18/ 18.5/ 19/ 19.5/ 20/ 21/ 22/ 23/ 24/ 25..
  • ★【Easy to use】: The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need. So it can check the convex and concave surfaces. The convex pattern is used to detect the concave surface arc, and the concave template is used to detect the convex surface arc..
  • ★【Application】: They measure accurately and have almost no errors, will help you quickly and easily che....
Check Stock

CGOLDENWALL High accuracy digital radius gauge digital radius indicator Measurement Tool with 10mm /20mm /30mm /60mm/100mm changeable measuring jaw Black

  • DIGITAL DISPLAY RADIUS GAUGE: can both measure Outer & Inner Radius of arcs. Measuring Range: length displacement 0-13mm.
  • Large High Definition Display, the readings are clear at a glance.
  • The data connection port can be connected to the computer to output data, which is convenient and quick..
  • Inch/Metric Conversion: Switchable between mm and inch, Suitable for All Kinds of Measurement.
  • With 5 Interchangeable Measuring Jaws: 10mm/20mm/30mm/60mm/100mm. You can choose corresponding jaws according to your measuring needs..
  • ATTENTION: Our digital radius gauge is Powered by CR2032 Battery. But the battery is NOT included in the package due to air transport regulation..
Check Stock

Uiegurit Guitar Neck Notched Straight Edge Luthiers Tool with String Action Ruler Guitar Radius Gauge for Guitars Neck Leveling

  • GUITAR LUTHIER TOOL: Include guitar straight edge, string action ruler and radius gauge, great for guitar technicians and guitarists to maintain and repair their instrument themselves in a short time, reducing buzzing.
  • NECK CHECK GUITAR TOOLS: Dual scale design, designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar.
  • GUITAR RADIUS GAUGE: Stainless steel material, set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, luthier tools for Guitar and Bass Setup.
  • GUITAR ACTION GAUGE: Etch printing on double sides, metric & imperial, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height.
  • THE INSTRUCTIONS OF NOTCHED STRAIGHTEDGE: By sliding the notched grooves of the straight edge until they all set flat against guitar frets, you can see if your guitar neck is straight or needs adjustment.
Check Stock

5Pcs Stainless Steel Radius Gauge, Portable Concave Convex External Internal Arc Measuring Tool Radius Fillet Gauge Set R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R25-50

  • 【Package Includes】The radius fillet gauges set contains 5 different shapes and measuring range: R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R25-50 to meet you various need..
  • 【Premium Material】This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust..
  • 【Multi-purpose】The radius measuring instrument has two types of leaves so it can check both convex and concave surfaces. The convex pattern is used to detect the concave surface arc, and the concave template is used to detect the convex surface arc..
  • 【Excellent Design】The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
  • 【Wide Application】This radius gauge is widely used in home improvement, machine installation, electric equipment, suitable for tool and mold manufacturers, mechanics and many other workers to check the tool radius of the meter, measure the thickness or width of screw, valve, bearing ect..
Check Stock

4Pcs Radius Gauge R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25 Measure Tool Metric Reading and Portable Stainless Steel Radius Fillet Gauge Measuring Tool

  • The thread Pitch Gauge used to measure the pitch of the thread, It sets 4pcs centre gage 55° Inch System..
  • This radius gauge has two types of leaves so it can check both convex and concave surfaces..
  • There are four radium gauges in different shapes and sizes to meet you various need..
  • Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..
Check Stock

Willard Pool Cue Tip Shaper - Dime Radius

  • Purpose - The Willard Cue Tip Shaper is designed to quickly and accurately reshape your cue tip to the perfect dime radius of 0.358 in. every time..
  • Precision - With the Willard Shaper you'll be able to maintain a perfect and consistent curved dime radius necessary to accurately hit the ball..
  • The carbon brazed steel grit on the inside of the domed shaped interior is designed to ensure a lifetime of reliable usage. The gauge design on the side of every Willard Shaper is made as a precise indicator in measuring the perfect tip shape..
  • Portable - At a diameter of 1-1/2" the Willard Cue Tip Shaper is small enough to take with you on the go, and by using the punched hole on the side of the Willard Shaper you can easily carry your shaper on a key chain..
  • Use - By holding the Willard Dime Shaper in the palm of your hand and pushing the carbon brazed steel grit down on the cue tip of your cue moving the shaft of your cue back and forth in a clockwise and counterclockwise motion you'll be able to quickly return your cue tip to the perfect dime radius. The gauge on the side indicates the perfect dime radius is achieved when no light passes through the crescent gap between the Willard and your cue tip..
Check Stock

Othmro Radius Gauge Set R25-50mm Metric Radius Fillet Gauge,Concave Convex External Internal Arc Measuring Tool for Tool and Die Makers Check

  • 【Parameter】-Material:Stainless Steel.
  • 【Advantage】- simple structure, easy to use,laser engraving, clear scale, easy to distinguish different sizes..
  • 【High Quality Material】- All the radius gauge are made of high quality steel, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust and corrosion,Durable and not easy to deform..
  • 【Easy to use】-The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need. So it can check the convex and concave surfaces. The convex pattern is used to detect the concave surface arc, and the concave template is used to detect the convex surface arc..
  • 【Wide Application】- This radius gauge is widely used in home improvement, machine installation, Electric equipment, Suitable for tool and mold manufacturers, Mechanics and many other workers to check the tool radius of the meter, Measure the thickness or width of screw, Valve, Bearing ect..
Check Stock

OBPFY Stainless Steel Radius Gauge Set, 6Pcs Portable Concave Convex External Internal Arc Measuring Tool for Tool and Die Makers Check （R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R25-50/R26-80）

  • 【Feature】-- The radius measuring instrument has two types of leaves so it can check both convex and concave surfaces. Each leaf is clearly marked, Convenient to identify which leaf you need..
  • 【Scope Application】-- This radius gauge is widely used in home improvement, machine installation, Electric equipment, Suitable for tool and mold manufacturers, Mechanics and many other workers to check the tool radius of the meter, Measure the thickness or width of screw, Valve, Bearing ect..
  • 【Material】-- High quality stainless steel material made, Anti-rust and corrosion resistant, Durable and not easy to deform..
  • 【Size】-- R0.3-1.5mm/R1-6.5mm /R7-14.5mm/R15-25mm/R25-50mm /R26-80mm.
Check Stock

Starrett S167CHZ Combined 167AH And S167B Radius Gauges Inch Set With Holder, Satin Finish, 1/64\ - 1/2\ Range, 1/64\

  • Set of 25 radius gauges for measuring concave and convex surfaces in woodworking, metalworking, machining, layout, and pattern-making applications.
  • Each gauge has five measuring surfaces for concave or convex radii, and is stamped with the radius size for accurate sizing.
  • Range from 1/64 to 1/2" in 1/64" increments.
  • Stainless steel with satin finish provides durability and rust resistance.
  • Includes 4"/100mm gauge holder for measuring in narrow or constricted locations and a protective case for storage.
  • Each gage is clearly marked with its radius.
  • Each gage has five different gagine surfaces for both convex and concave radii.
  • All gages have precision finished radii with extra smooth, accurate edges.
Check Stock