Categories

Best Rafter Hangers

8 Pcs Joist Hanger Structural-Connectors Face Mount , 2x4 Face Mount Joist Hanger 18 Gauge, Hot Dip Galvanized Finish Steel Joist Dimensional Hangers

  • Carbon steel Q235B material, surface hot-dip galvanizing, good impact resistance, wear resistance and corrosion resistanceCarbon steel Q235B material, surface hot-dip galvanizing, good impact resistance, wear resistance and corrosion resistance.
  • Screw holes: φ4.5mm, slot holes: 9x4.5mm.
  • Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.
Check Stock

IRWIN Tools Tri and Mitre Square (1794473),Silver

  • 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Johnson Level & Tool RAS-120 Aluminum Rafter Square w/Manual, 12

  • RAFTER ANGLE SQUARE: Johnson Rafter Tool gets the job done easily and accurately with a strong aluminum body featuring CNC machined edges. This versatile tool is perfect for professional builders and contractors..
  • POWDER-COATED FINISH: This rafter square & protractor features permanently etched graduations and numbers that are easy-to-read due to the low-glare, protective powder-coated finish..
  • ACCURATE MEASUREMENTS: This square layout tool has scribe notches beginning at 1-3/4" that are excellent for transferring outer increments from the pivot point, as well as convenient markings that measure 24 board dimensions of 1-1/2", 3", and 3-1/2"..
  • APPLICATION RANGE: The thick edge of this angle square is perfect as a saw guide for cross-cuts or angled cuts utilizing the engraved protractor scale. It can also be utilized indirectly, by scribing notches to form a saw cut line for rip cuts..
  • SIMPLIFIES STAIR LAYOUT: This 12" triangle square integrated distance and angle scale allows you to draw your cut lines on your stringers quickly and precisely. This rafter square contains scales for cutting hip, valley, and jack rafters..
Check Stock

Mecurate Rafter Square, 12 inch Triangle Carpenter Square Die-cast Aluminum for Woodworking and Carpentry

  • 【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
  • FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....
Check Stock

Mecurate Rafter Square, Triangle Carpenter Square Die-cast Aluminum Alloy for Woodworking and Carpentry (7 inch die-Casting)

  • 【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Mr. Pen- Rafter Square and Combination Square Tool Set, Black, 7" Square, 12" Aluminum Carpenter Square, Framing Square, Square Tool, Woodworking Square, Combo Square, 7 Inch

  • Package includes 1 piece of 12" combination square and 1 piece of 7" rafter square. The 12" combination square can be used as a level, depth gauge, and ruler, while the 7" rafter square can be used as a straight edge for marking and sawing..
  • 12-inch heavy-duty combination square ensures accuracy with its spring-loaded brass bolt. It includes a brass scriber and level while its stainless steel blade is precisely marked with inch and cm graduations in 1/16,1/8, and 1/32 Inch increments for your convenience..
  • 7-inch triangle square is perfect for use on the job site or at home.
  • this heavy-gauge die-cast billet aluminum alloy square fits easily into your pocket and comes with gradations to mark common, hip, valley, and jack rafters. The non-glare matte finish makes it easy to read in any light condition..
  • Mr. Pen 12" combination square is designed with a durable, rustproof stainless steel blade to last through tough job site conditions, while Mr. Pen 7" rafter square is made of heavy-gauge die-cast billet aluminum alloy construction that increases accuracy over laser-etched extruded stamped rafter ....
Check Stock

Nuvo Iron RC3 Black Galvanized Steel 2\ Traditional Clips-12 Pack Rafter Clips

  • These clean and contemporary, long lasting rafter clips are designed to accent any outdoor structure (decks, gazebos, pergolas, privacy walls, arbors etc.).
  • Unlike other rafter clips, ours are pre-finished, require no painting and ready for an easy install right out of the box.
  • Features a thermally bonded and polyester textured black powder coated satin finish.
  • We designed our rafter clips to be an integral part of your structure without you having to sacrifice the look of your design.
  • Installation process is quick and intuitive..
Check Stock

kammqi Rafter Square with Level Carpenter Squares Triangle Square 7 Inch Square Ruler Aluminum Layout Tools for Woodworking (Silver 7inch)

  • 【High quality】:7-inch Rafter Square made of precise Heavy-gauge aluminum alloy, solid aluminum alloy for durability, high hardness and corrosion-resistant, the rafter square has undergone multiple polishing, and the surface is smooth and does not hurt hands, easy to carry..
  • 【Precision and Durable 】: Accurate clear scale and permanent markings square ruler is constructed for maximum durability, it has legibility and long-lasting usage, carpenter square give accurate measurement, mark up to the finest millimeter..
  • 【User-Friendly】: Easy to read spirit level , you can easily brace the rafter square flush with the wood, embedded magnet has good suction force, the stainless steel ruler is easier to slide for measurement, easy to detach the stainless steel ruler increase product practicality and versatility..
  • 【Multi-Function】: 7-inch Multiple graduation rafter square has many kinds of Application, suitable for marking Square And 45-Degree Lines, protractor, framing square, triangle square, marking horizontal base, great companion for carpenters and builders..
  • 【Guarantee and Suitability 】: 30 days free replacement parts ,1-year warranty, and full life customer service. Good for carpenters, professionals, hobbyists, craftsman and builders..
Check Stock

kammqi Carpenter Squares Rafter Square with Level 7 Inch Metal Triangle Square Carpenter Tools Layout Tools Stainless Steel Woodworking Square (Black 7inch)

  • 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

WORKPRO Rafter Square and Combination Square Tool Set 7 in Aluminum Alloy Die-Casting Carpenter Square and 12 Inch Zinc-Alloy Die-Casting Square Ruler Combo Rafter Square Layout Tool

  • Durable Material - The rafter square is die-cast from heavy-gauge aluminum alloy which enables it to last long and still give an accurate measurement. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish..
  • Clearly Identifiable Scale - The rafter square finishing features low glare and protective powder coated. It has permanent deep markings and white graduations for max readability in any lighting. The stainless steel ruler of the combination square has a deep etching scale for superior legibility and long-lasting usage..
  • Multiple Graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, miter square, and protractor square. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale values: 1/16”, 1/32”, and 1mm..
  • User-Friendly - Lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge. The spring screw of the combination square makes it easier to detach the stainless steel ruler and the smooth ruler is easier to slide for your measurement..
  • Wide Versatility - Easy-to-read level vial and....
Check Stock

DEWALT DWF83PL Collated Framing Nails, One Size, Yellow/Black

  • Industrial grade design for high speed and high volume framing applications.
  • Recoil dampening engine system to minimize recoil. Adjustable rafter hook.
  • Lightweight at only 8 lbs. With enhanced ergonomics and balance for comfort and control.
  • Tool free Features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode.
Check Stock

Suitable for Hitachi FN83A /NR83A /NR83A2/NR83A2(S)/FR350A frame nail gun donut flush nailer parts replacement

  • GH1 "L" Shaped Rafter Hook (Aluminum) Compatible with Nail Guns with 3/8" NPT Air Fitting.
  • Includes (1) "L" Shaped Rafter Hook (Aluminum) as pictured.
Check Stock