Nuvo Iron RC3 Black Galvanized Steel 2\ Traditional Clips-12 Pack Rafter Clips
- These clean and contemporary, long lasting rafter clips are designed to accent any outdoor structure (decks, gazebos, pergolas, privacy walls, arbors etc.).
- Unlike other rafter clips, ours are pre-finished, require no painting and ready for an easy install right out of the box.
- Features a thermally bonded and polyester textured black powder coated satin finish.
- We designed our rafter clips to be an integral part of your structure without you having to sacrifice the look of your design.
- Installation process is quick and intuitive..
Check Stock
Mr. Pen- Rafter Square and Combination Square Tool Set, Black, 7" Square, 12" Aluminum Carpenter Square, Framing Square, Square Tool, Woodworking Square, Combo Square, 7 Inch
- Package includes 1 piece of 12" combination square and 1 piece of 7" rafter square. The 12" combination square can be used as a level, depth gauge, and ruler, while the 7" rafter square can be used as a straight edge for marking and sawing..
- 12-inch heavy-duty combination square ensures accuracy with its spring-loaded brass bolt. It includes a brass scriber and level while its stainless steel blade is precisely marked with inch and cm graduations in 1/16,1/8, and 1/32 Inch increments for your convenience..
- 7-inch triangle square is perfect for use on the job site or at home.
- this heavy-gauge die-cast billet aluminum alloy square fits easily into your pocket and comes with gradations to mark common, hip, valley, and jack rafters. The non-glare matte finish makes it easy to read in any light condition..
- Mr. Pen 12" combination square is designed with a durable, rustproof stainless steel blade to last through tough job site conditions, while Mr. Pen 7" rafter square is made of heavy-gauge die-cast billet aluminum alloy construction that increases accuracy over laser-etched extruded stamped rafter ....
Check Stock
kammqi Rafter Square with Level Carpenter Squares Triangle Square 7 Inch Square Ruler Aluminum Layout Tools for Woodworking (Silver 7inch)
- 【High quality】:7-inch Rafter Square made of precise Heavy-gauge aluminum alloy, solid aluminum alloy for durability, high hardness and corrosion-resistant, the rafter square has undergone multiple polishing, and the surface is smooth and does not hurt hands, easy to carry..
- 【Precision and Durable 】: Accurate clear scale and permanent markings square ruler is constructed for maximum durability, it has legibility and long-lasting usage, carpenter square give accurate measurement, mark up to the finest millimeter..
- 【User-Friendly】: Easy to read spirit level , you can easily brace the rafter square flush with the wood, embedded magnet has good suction force, the stainless steel ruler is easier to slide for measurement, easy to detach the stainless steel ruler increase product practicality and versatility..
- 【Multi-Function】: 7-inch Multiple graduation rafter square has many kinds of Application, suitable for marking Square And 45-Degree Lines, protractor, framing square, triangle square, marking horizontal base, great companion for carpenters and builders..
- 【Guarantee and Suitability 】: 30 days free replacement parts ,1-year warranty, and full life customer service. Good for carpenters, professionals, hobbyists, craftsman and builders..
Check Stock
kammqi Carpenter Squares Rafter Square with Level 7 Inch Metal Triangle Square Carpenter Tools Layout Tools Stainless Steel Woodworking Square (Black 7inch)
- 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
- 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
- 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
- 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
- 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock
WORKPRO Rafter Square and Combination Square Tool Set 7 in Aluminum Alloy Die-Casting Carpenter Square and 12 Inch Zinc-Alloy Die-Casting Square Ruler Combo Rafter Square Layout Tool
- Durable Material - The rafter square is die-cast from heavy-gauge aluminum alloy which enables it to last long and still give an accurate measurement. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish..
- Clearly Identifiable Scale - The rafter square finishing features low glare and protective powder coated. It has permanent deep markings and white graduations for max readability in any lighting. The stainless steel ruler of the combination square has a deep etching scale for superior legibility and long-lasting usage..
- Multiple Graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, miter square, and protractor square. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale values: 1/16”, 1/32”, and 1mm..
- User-Friendly - Lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge. The spring screw of the combination square makes it easier to detach the stainless steel ruler and the smooth ruler is easier to slide for your measurement..
- Wide Versatility - Easy-to-read level vial and....
Check StockDEWALT DWF83PL Collated Framing Nails, One Size, Yellow/Black
- Industrial grade design for high speed and high volume framing applications.
- Recoil dampening engine system to minimize recoil. Adjustable rafter hook.
- Lightweight at only 8 lbs. With enhanced ergonomics and balance for comfort and control.
- Tool free Features: depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode.
Check Stock
AUTOBOTS 1/2" D Rings for Trailers Heavy Duty Trailer Tie Down Rings,Max 12,000 Lbs,Includes All Mounting Hardware, Forged Steel Bolt-on D Ring,Large Trailer Tie Down Anchor Points 2 Pack Black
- 【D Rings for Trailers】: 1/2 Inch d-rings Welded on 1/4" Thick Steel Plate, Plate Size 6.3"x4.3", and Another Back Plate of the Same Size, 4 10.9 Grade Bolts and 4 Anti-loosening Nuts for Mounting, 2pack.
- 【Includes All Mounting Hardware】：Autobots D Ring Tie Down Anchor Points Provided with 2 Sets of D-Ring Welded to the Backing Plate, and 2 Backing Plates of the Same Size, 8 Bolts Grade 10.9, 8 Nuts Grade 10.9, Drill to Install in Minutes.
- 【Top Quality Material】：Trailer Tie Downs is Made with Heavy Duty Drop Forged Steel, Galvanized and Power Coated, Solid and Strong, our d ring tie downs Also Prevents Rust and Corrosion. Its Break Strength Reaches Up to 12000lbs.
- 【Widely Used】：Bolt D Ring Anchor Are the Most Convenient and Flexible Tie-down Device Available. Often Used As Mooring Anchors on Trucks, Trailers, Pickups, Campers, Vans, Docks, Boats, Excavators, Flatbeds , Garages, Warehouses and Workshops.
- 【More Professional and Reliable】- Compared to Ordinary Trailer Tie Down Rings, Our Trailer D Rings Have Larger Loads, Easier Installation, an....
Check StockStair Gauges for Framing Square and Rafter，Lengthen，Anti-lost Pair
- Lengthened size—Perfect for stair stringers layout, rafter layout, etc.Easy layout on any material,especially when there are gaps in the edge of the....
- Patented product.Recessed cutout—Align them with the specific ruler marks on the frame square, the ruler marks can be seen through the concave cut....
- Dedicated storage—The gauge is equipped with steel wire rope to provide a dedicated storage place to prevent loss.They are also very light and easy....
- Material—Made of anodized aluminum alloy.Hexagonal plane is more frictional and can work better..
- Multiple functions—Stair stringers and Rafter layout - Rip guide for circular saw - Framing square attachment - Using on speed square to mark....
Check StockPOWERTEC 80008 Steel Framing Square with Rafter Tables | 16-Inch by 24-Inch L Shaped Tool - Black
- INCLUDES: (1) L-Shaped Rafter/Framing Square w/ Rafter Instructions.
- FUNCTION: Commonly used for carpentry, framing, laying rafters and stairs – used to create square and true dimensions for your applications.
- FEATURES: Steel square profile, optimal visibility, with 1/8, 1/10, 1/12 and 1/16 front and backside stamped graduated scales and conversion tables.
- APPLICATION VERSATILITY: This universal square measuring layout tool can be used as a straight edge, finding and establishing right angles and marking cut off work on widestock.
- DIMENSIONS: Frame Square Tool Body 24” long and 2” wide | Tongue is 16” long and 1-1/2” wide | 1/8” thick.
Check StockSuitable for Hitachi FN83A /NR83A /NR83A2/NR83A2(S)/FR350A frame nail gun donut flush nailer parts replacement
- GH1 "L" Shaped Rafter Hook (Aluminum) Compatible with Nail Guns with 3/8" NPT Air Fitting.
- Includes (1) "L" Shaped Rafter Hook (Aluminum) as pictured.
Check StockWinning Streak Sports NHL Chicago Blackhawks Rafter Raiser Banner - Wall Decor for Sports Fans
- OFFICIALLY LICENSED: Winning Streak Sports NHL Banners are officially licensed by the NHL..
- CHICAGO BLACKHAWKS: A banner to proudly celebrate the Chicago Blackhawks in your home..
- RAFTER RAISER BANNERS: Not just any fan shop wall decor, the Rafter Raiser Banner shows the love of your favorite Stanley Cup championship teams. The perfect addition to any sports room..
- DECORATIONS FOR LOYAL FANS: Winning Streak Sports offers a variety of high quality Dynasty Banners, Heritage Banners, pennants, flags, signs, and other sports licensed decor for every fan..
- MATERIALS AND SIZE: Constructed of wool fabric with embroidery and applique design detail. Actual size of the banner is 22" W x 14"L and comes with a ready for hanging nylon cord.
Check Stock
Johnson Level & Tool 1904-1200 Johnny Square Professional Easy-Read Aluminum Rafter Square, 12
- The New Johnny Square Allows For Fast, Accurate Markings For Rip Cuts With Carpenters And Targeted End Users.
- Fez Read: The Fez Read Laser Etched Graduations Have Numbers That Are Highly Visible, And The Thick Edge Serves As A Useful Saw Guide. The Scribing Notches Can Also Be Used To Create A Saw Cut Line For Rip Cuts.
- Fast Marking: Anyone Looking To Make Fast, Accurate 45-degree And 90-degree Markings Will Appreciate This Tool..
- Builders And Contractors: This Rafter Square Is A Versatile Tool For Builders And Contractors. Its Thick Edge Can Be Used Directly With The Saw Against The Square For Cross Cuts Or Angled Cuts Using The Etched Protractor Scale.
- Simplify Stair Layout: The Johnny Square Also Simplifies Stair Layout Its Integrated Distance And Angle Scales Let You Quickly And Accurately Mark Your Cut Lines On Your Stringers. Of Course, This Rafter Square Also Has Scales For Cutting Hip, Valley, And Jack Rafters.
Check StockLkonwee Tall Stair Gauges for Stair Layout, Rafter Layout, Marking Repetitive Angles, Framing Square Attachment and As A Rip Guide on Your Saw Jigs
- Material: Made of anodized aluminum with a black oxide stainless steel thumbscrew,tough and durable..
- Functions: Stair stringers and Rafter layout - Rip guide for circular saw - Framing square attachment - Using on speed square to mark repetitive angles - Using on speed square to guide saw to make angle cuts..
- The Taller Profile extends down past any rounded edges for defects on your work piece, giving you a seriously accurate layout..
- The large knurled thumbscrew makes it easy to grip and tighten onto any rafter square even when wearing gloves..
- Align them with the specific ruler marks on the frame square, the ruler marks can be seen through the concave cut when the gague is fully inserted,increase visual field area..
Check Stock
