GIGABYTE GA-990FXA-UD5 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard

  • CPU: AM3+/AM3/AMD Athlon II Chipsets: AMD 990FX/AMD SB950.
  • Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory.
  • Audio: Realtek ALC889 codec , High Definition Audio, Dolby Home Theater, 2/4/5.1/7.1-channel, LAN: 10/100/1000 Mbit.
  • Expansion Slots: 2 x PCI Express x16 slot running at x16 ,1 x PCI Express x16 slot running at x8 ,2x PCI Express x4 slots.
  • Storage Interface: 6 x SATA 6Gb/s connectors , Support for SATA RAID 0, RAID 1, RAID 5,RAID 10 and JBOD.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port,1 x optical S/PDIF Out connector,1 x IEEE 1394 port,8 x USB 2.0/1.1 ports.
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector,1 x 8-pin ATX 12V power connector,8 x SATA 6Gb/s connectors,1 x CPU fan header,.
  • USB: Up to 14 USB 2.0/1.1 ports, Up to 4 USB 3.0/2.0 ports, Up to 2 IEEE 1394a ports.
  • Dual channel memory architecture, DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules.
  • Expansion Slots: 1 x PCI Express x1 slot, 1 x PCI slots, Support for 2-Way/3-Way AMD CrossFireX and NVIDIA SLI technology.
Check Stock

Gigabyte GA-970A-DS3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

  • Audio: Realtek HD audio codec. High Definition Audio. 2/4/5.1/7.1-channel. Support for S/PDIF Out. LAN: Realtek GbE LAN chip (10/100/1000 Mbit).
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots. Support for AMD CrossFireX technology..
  • Storage Interface: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD..
  • USB: South Bridge: Up to 12 USB 2.0/1.1 ports. Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel.
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/6 x SATA 6Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x power fan header/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/3 x USB 2.0/1.1 headers/1 x Clear CMOS jumper.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port. 6 x USB 2.0/1.1 ports. 2 x USB 3.0/2.0 ports. 1 x RJ-45 port. 3 x audio jacks.
Check Stock

StarTech.com USB 3.1 (10Gbps) External Enclosure for 2.5' SATA Hard Drives - RAID - 2-Bay USB Type-C Hard Drive Enclosure (S252BU313R)

  • INCREASED PRODUCTIVITY: The USB Type-C hard drive enclosure supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives..
  • FASTER SPEEDS: The 2.5" SATA hard drive enclosure gives you greater bandwidth and speed, supporting transfer rates of up to 10Gbps.
  • twice the speed of USB 3.0 (USB 3.1 Gen 1) technology..
  • VERSATILE COMPATIBILITY: The external hard drive enclosure comes with two USB cables for use with the new and legacy devices. It also includes both USB-C to Micro B and USB-A to Micro B cables..
  • SUPPORT FOR RAID: Through RAID 0 support, the USB 3.1 hard drive enclosure lets you maximize the performance of your SATA III SSDs. The dual-bay enclosure also supports RAID 1, Big and JBOD..
Check Stock

Seagate 5TB Enterprise NAS HDD SATA 6Gb/s 128MB Cache 3.5-Inch Internal Bare Drive (ST5000VN0001)

  • Ideal for scalable, high performance data sharing for medium enterprises.
  • Up to 8TB capacity for 4-16 bay NAS system.
  • RAID Rebuild technology speeds up time-consuming complete RAID rebuilds.
  • NAS-optimized performance for higher write workloads.
  • Minimal rotational vibration with extended error recovery controls for better data integrity.
Check Stock

Raid Ant Gel, 1.06 OZ (Pack - 3)

Check Stock

Mediasonic HFR2-SU3S2 PRORAID 4 Bay 3.5' SATA Hard Drive Enclosure - USB 3.0 & eSATA

  • Support 3.5″ SATA I / II / III hard disk drive up to 16TB per drive, Support Hard Drive Transfer Rate up to SATA III Speed. Hardware Raid controller built-in on board with one-button control..
  • One Button Raid Control support Single Drive Mode, Raid 0 (Spanning) JBOD, Raid 0 (Stripping), Raid 1 (Mirroring), Raid 3 (Stripped set with dedicated parity), Raid 5 (Stripped set with distributed parity), Raid 10 (Mirroring + Striping).
  • Transfer rate up to 5.0Gbps via USB 3.0, up to 3.0Gbps via eSATA..
  • Smart Fan with built-in thermal-sensor, Auto & Manual modes, and 3 speed levels.
  • Compatible with Mac OSX 10.8 or later and Windows 10 / 8.1 / 8 / 7.
Check Stock

SABRENT Rocket XTRM-Q 16TB External Aluminum SSD (SB-DXMQ-8X2)

  • DESIGN: Solid aluminum construction for durability and maximum heat dissipation. Integrated temperature and health monitoring system. Tool-free magnetic fasteners for easy instalation.Power adapter is required and included..
  • STORAGE: This is a dual disk external drive containing two separate 8TB disks for a total of 16TB of additional stoarage space. Can be used independantly or combines via software as one single drive!.
  • CONFIGURATIONS: x2 Indepandant 8TB drives. RAID 0: Data is interleaved accross two or more physical disks allowing for maximized performace. RAID 1: Maintinfgs a copy of the same data on both disks, faux-tolerant but storage is halved. JBOD/SEQUENTIAL: Writes data until disk is full and then moves on to wrting on the second disk..
  • SPEED: Never slow down! High power efficiency and single disk speeds of up to 1400 MB/s per single SSD or up to 2800MB/s when using RAID 0 mode..
  • INTEL THUNDERBOLT 3 CONTROLER: Don't entrust your valuable DATA to devices that are only “compatible” with Thunderbolt 3. Sabrent is one of the only manufacturers and brands who are fully certified by Intel to use Thunderbolt 3 technology in their products. Don't settle for anything less than the original!.
Check Stock

Oyen Digital 80TB Mobius 5-Bay FireWire 800, eSATA, USB 3.0 RAID Hard Drive Array (3R5-EB3-80TB)

  • Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
  • 80 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
  • JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
  • Configures hardware RAID modes easily using mode switches.
Check Stock

Oyen Digital 100TB Mobius 5-Bay FireWire 800, eSATA, USB 3.0 RAID Hard Drive Array, 3R5-EB3-100TB

  • Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
  • 100 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
  • JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
  • Configures hardware RAID modes easily using mode switches.
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.(Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Oyen Digital Mobius 5-Bay FireWire 800, eSATA, USB 3.0 Raid Hard Drive Enclosure

  • Interface: USB 3.0, eSATA, and FireWire 800.
  • Simple RAID configuration via switch settings, no software required.
  • RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, SPAN, JBOD.
  • Note: We recommend using only Enterprise or NAS drives (512e only). The Mobius is not compatible with 4Kn hard drives..
Check Stock

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 3.3 Feet, 1m

  • MULTILANE MINI SAS DATA CABLE directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
  • Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
  • LEVERAGE RAID CONTROLLER PERFORMANCE with this straight, 4-lane, high performance internal Mini SAS 4i cable.
  • Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
  • DIY OR IT PRO INSTALLERS both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
  • 3 foot mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces and provides sufficient length for internal cable management.
  • Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
  • Ideal component of a professional SAN network.
  • ROBUST DESIGN of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connect....
Check Stock

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 Mini SAS Cable, 1.8 FT / 56 cm

  • Multilane Mini SAS data cable directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
  • Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
  • Leverage RAID controller performance with this straight, 4-lane, high performance internal Mini SAS 4i cable.
  • Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
  • DIY or IT pro instrallers both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
  • Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces.
  • Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
  • Ideal component of a professional SAN network.
  • Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection.
  • SFF-8087 host compatible with popular controller HBA cards such....
Check Stock