Categories

Best Rain Bird Esp Wifi Module

Rain-Bird ESPSM3-3-Station Expansion Module for ESP-M ESP-Me ESP-SMT and ESP-SMTe Series Timers

  • Adds three additional stations to Rain Bird residential modular controllers.
  • Compatible with Rain Bird ESP-M, ESP-Me, ESP-SMT and ESP-SMTe series irrigation controllers.
  • Hot-swappable 3-station expansion module can be installed without powering down the controller.
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock

Wifi Relay Module, 5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch

  • 2 WORKING MODES---Mode 1: The phone is directly installed on the WiFi module.
  • Mode 2: Equipped with a mobile phone and WiFi module on the router.
  • Additional features: It can also be used as a USB relay when the ESP-01 is pulled out.
  • TRANSMISSION DISTANCE---In an open environment, when the mobile phone is installed on the WiFi module, the maximum stable transmission distance is 100M. When the WiFi module and the mobile phone are simultaneously carried on the router, the transmission distance depends on the signal strength of the router.
  • SMARTCONGIG TECHNOLOGY---Use smartcongig technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions.
  • SHORT RESPONSE TIME---On-board 5V,10A250V AC 10AV30V DC relay, which can continuously pull 100,000 times, with diode discharge protection and short response time. Onboard ESP-01 WiFi module and high performance microprocessor STM8S103.
  • OTHER EQUIPMENT---Board mode selection and real-time working status indicator. Reserved UART debug interface and STM8 SWIM program download interface.
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

DORHEA 3Pcs ESP32 Development Board WiFi + Bluetooth Microcontroller Dual Cores ESP-32 ESP-32S Board ESP-WROOM-32 CP2102 Chip 38Pin Narrow Version 2 in 1 Dual Core Low Power Consumption ESP-32S

  • The esp32s module has 38 pins and has more features than a 30-pin module, narrower width, compatible with breadboard.
  • ESP32 is a WiFi+Bluetooth chip developed. It is designed to provide access network functionality for embedded products..
  • ESP32s development board support Lua program, easy to develop, support of three modes: AP, STA and AP + STA..
  • NodeMCU-32S is based on the ESP-32S module. The platform uses many open source projects , this module is safe, reliable, and scalable to a variety of applications..
  • NodeMCU-32S includes firmware that can run on ESP32 Wi-Fi SoC chip, and hardware based on ESP-32S module..
Check Stock

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

  • ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..
Check Stock

DORHEA ESP8266 Code Burner Firmware Downloader Flash Download Tool Test Board + 5pcs ESP-12E ESP12E WiFi Module, Wireless Transmission Serial Transceiver Receiver

  • ESP8266 ESP-12E WiFi serial module built-board PCB antenna, 4M bytes Flash.
  • Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F. Micro USB interface, this module is very easy to program..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning..
  • Easy to use: ESP8266-12E is a combined products,it's very convenient to operate(Need to solder 3V regulator by youself )..
  • ESP8266-12E is an enhanced version ESP8266-12, improving the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

AITRIP 6pcs D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth Development Board 5V Compatible with Arduino

  • Wireless WiFi Bluetooth 2 in 1 dual-core CPU module MINI KIT ESP32 module development board module.
  • 100% compatible with Arudino IDE, Lua and Micropython.
  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality.
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO.
  • It has a similar pin layout to the conventional D1 Mini ESP8266-12F and is therefore pin-compatible with most accessories for it..
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock