Categories

Best Rapid Prototyping Molding

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

ELEGOO ABS-Like Resin Rapid UV Curing 405nm Standard Photopolymer Resin ABS 3D Resin High Precision Non Brittle Non Toxic for LCD 3D Printer Grey 1000G

  • 【ABS-Like Resin】 ABS-like resin is designed for reducing volume shrinkage during the photocuring process, thereby ensuring high precision of....
  • 【Fast Curing & Excellent Fluidity】 The UV resin can be rapid prototyping, developed to reduce the forming time with its excellent fluidity. Make....
  • 【Lower Odor and Quality Materials】 This resin is specially designed for 3D printers with ultra-low odor. Optimizes the user's experience during....
  • 【Pure and Vivid Colors】 This 3D resin contains high-quality pigments, which makes the printed works show pure and stunning color effect just like....
  • 【Wide Applicability】 Widely compatible with LCD DLP 3D printers. Apply to DIY, jewelry design, engineering model etc..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

SP-3 Facesheild Corexy Structure Aluminium DIY 3D Printer 220220235mm Printing Size with MKS Mainboard/Power Resume Function/Off-line Print/3.5 inch Touch Color Screen 3D Printer

  • Smooth Printing Surface, Accurate And Uniform Extrusion, Rapid Prototyping:TMC2208 256 subdivided motor drive (X.Y axis).
  • Stable, High Speed Operation, Silent Printing: Profile and sheet metal combined with all-metal body, hot bed platform leveling (optional 3 or 4....
  • Break Detection and Power off Continuous Printing: Automatically detect the feeding condition, automatically pause printing after the material is cut....
  • Touch Color Screen: 3.5 Inch large size touch screen: support multi-language (Chinese, English, French and Italian) interface operation.
  • What You Get: TWO TREES 3D Printer, 0.2 KG Filament (random color)TF Card includes (installation manual, accessory details, cura software package), 1....
Check Stock

Professional Electric Heated Roller Curling Roll Hair Tube No Hair Injury Charging Type Hair Styling Tool

  • Lightweight and compact, easy to carry.It only takes about 3 minutes heat up predetermined temperature.Adopts PTC heat material, heating up quickly and stably.Rechargeable curling iron can reduce the damage and prevent scald. Can create different style large wave hair, beautiful and easy to operate..
  • Ion Hot Rollers are designed to give your hair body, wave, or curl, in less time, with less effort. Unlike old-school hot rollers, these state-of-the-art rollers have the heating element inside each roller..
  • These curl rollers have the PTC heating element on the inside, allowing them fully heat as quickly as 2~4 minutes and remain hot for up to 20 minutes..
  • Don't need to use potions, it does not hurt the hair quality. It can make you hair rapid prototyping, and it is long lasting and electronic thermostat..
  • It has double size rollers, you can make different style.A one-off effect, when you wash your hair, then recover.The roller hair kit is small enough to be considered a travel-sized hot roller set, making it easy to take them wherever you go..
Check Stock

ANYCUBIC 3D Printer Resin 355-410nm Fast UV-Curing Photosensitive Wax Resin for SLA/LCD 3D Printing Rapid Precise Printing Craftsman Liquid for Jewelry Anime Figure Garage Kit and Character Design

  • High Precision and Low Shrinkage: Anycubic wax 3D Printer resin is designed for improving volume shrinkage during the photocuring process, no....
  • More Smooth and Delicate Surface: With the excellent fluidity of Anycubic craftsman resin, it can quickly infiltrate models and cure them into shapes,....
  • Fast Curing and Great Stability: The uv-curing Craftsman resin can be rapid prototyping, reduce the forming time, the end product is flexiable and not....
  • Wide Compatibility and Applications: Anycubic wax resin is compatible with 355nm~410nm wavelength and suitable for most LCD/SLA 3D printers. It is....
  • Low Odor: It has a slight smell, which is between ordinary resin and plant-based resin. Please wear the mask and gloves to avoid skin touch. The resin....
Check Stock

Sonic Scrubber Bathroom Tool

  • Pack of 4 different sonic scrubber brush heads and 1 Electric Cleaning Brush.
  • Effective at cleaning grout, faucets, sinks, corners, shower door tracks, countertops, grills, and more.
  • 4 heads to use in differernt occassions.Water resistant assembly for durability..
  • The great powered cleaning tool with rapid oscillation 8000 times per minutes for tile and tub bathroom small holes electronic brush cleaner.
  • Pulse and Continuous scrubbing settings.Ergonomic grip and rubberized molding for comfortable cleaning..
Check Stock

Insulated Lunch Boxes Super Long Insulated Barrel, 304 Stainless Steel Lunch Boxes, Large Capacity Multi-layer Student Lunch Boxes, Outdoor Picnic Office (Color : Gold)

  • 1.304 stainless steel, increase capacity, heat preservation and cold preservation, 3 layers of compartments, food grade materials are safe to use, food distribution is more reasonable.
  • 2. Two stainless steel snack boxes, the food is not savoury, food grade 304 stainless steel, food grade 304 stainless steel, safe and durable.
  • 3. Activity handle, made of plastic, not hot, durable, easy to use.
  • 4.304 stainless steel lunch box, two lunch boxes, make food packaging more suitable, one-piece molding, using 304 stainless steel, one stretch molding.
  • 5. Cooking hot pattern multi-function electric heat insulation lunch box, steaming and boiling at the same time, rapid heating, 200w high power.
Check Stock

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock

Metabo HPT 18V MultiVolt™ Cordless Finish Nailer Kit | Includes 1 Battery | 16 Gauge | Lifetime Tool Warranty | NT1865DMS

  • INCLUDES: NT1865DMS Cordless Finish Nailer, (1) Compact 3.0Ah Lithium Ion Battery BSL1830C, Charger, Contractor Bag, Safety Glasses.
  • CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom.
  • APPLICATIONS: For molding install, cabinetry, and finish work.
  • APPLICATIONS: Ideal for installation of chair rail, molding, cabinetry and other finish applications.
  • POWER: 1,500 nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery.
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer.
  • DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for flush drives into various materials.
  • EASY SWITCH FROM BUMP TO SEQUENTIAL: Selective actuation switch transitions between sequential mode and bump fire mode, when rapid nailing is preferred.
  • LED LIGHT: LED light is handy when working in low light areas.
  • BRUSHLESS MOTOR TECHNOLOGY: Longer run time per charge, less maintenance and increased durability.
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock