Categories

Best Rapid Prototyping Mould

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

ELEGOO ABS-Like Resin Rapid UV Curing 405nm Standard Photopolymer Resin ABS 3D Resin High Precision Non Brittle Non Toxic for LCD 3D Printer Grey 1000G

  • 【ABS-Like Resin】 ABS-like resin is designed for reducing volume shrinkage during the photocuring process, thereby ensuring high precision of....
  • 【Fast Curing & Excellent Fluidity】 The UV resin can be rapid prototyping, developed to reduce the forming time with its excellent fluidity. Make....
  • 【Lower Odor and Quality Materials】 This resin is specially designed for 3D printers with ultra-low odor. Optimizes the user's experience during....
  • 【Pure and Vivid Colors】 This 3D resin contains high-quality pigments, which makes the printed works show pure and stunning color effect just like....
  • 【Wide Applicability】 Widely compatible with LCD DLP 3D printers. Apply to DIY, jewelry design, engineering model etc..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

SP-3 Facesheild Corexy Structure Aluminium DIY 3D Printer 220220235mm Printing Size with MKS Mainboard/Power Resume Function/Off-line Print/3.5 inch Touch Color Screen 3D Printer

  • Smooth Printing Surface, Accurate And Uniform Extrusion, Rapid Prototyping:TMC2208 256 subdivided motor drive (X.Y axis).
  • Stable, High Speed Operation, Silent Printing: Profile and sheet metal combined with all-metal body, hot bed platform leveling (optional 3 or 4....
  • Break Detection and Power off Continuous Printing: Automatically detect the feeding condition, automatically pause printing after the material is cut....
  • Touch Color Screen: 3.5 Inch large size touch screen: support multi-language (Chinese, English, French and Italian) interface operation.
  • What You Get: TWO TREES 3D Printer, 0.2 KG Filament (random color)TF Card includes (installation manual, accessory details, cura software package), 1....
Check Stock

Professional Electric Heated Roller Curling Roll Hair Tube No Hair Injury Charging Type Hair Styling Tool

  • Lightweight and compact, easy to carry.It only takes about 3 minutes heat up predetermined temperature.Adopts PTC heat material, heating up quickly and stably.Rechargeable curling iron can reduce the damage and prevent scald. Can create different style large wave hair, beautiful and easy to operate..
  • Ion Hot Rollers are designed to give your hair body, wave, or curl, in less time, with less effort. Unlike old-school hot rollers, these state-of-the-art rollers have the heating element inside each roller..
  • These curl rollers have the PTC heating element on the inside, allowing them fully heat as quickly as 2~4 minutes and remain hot for up to 20 minutes..
  • Don't need to use potions, it does not hurt the hair quality. It can make you hair rapid prototyping, and it is long lasting and electronic thermostat..
  • It has double size rollers, you can make different style.A one-off effect, when you wash your hair, then recover.The roller hair kit is small enough to be considered a travel-sized hot roller set, making it easy to take them wherever you go..
Check Stock

Do-It Molds Hot Pot-2

  • ...duction and corrosion resistance. The lead melting pot with spout of the hand-held tin melting furnace can be rotated 360 degrees. Makes an excellent melting pot for small objects being poured into a mould. You can pour directly from the crucible to retain the heat right up to the pour..
  • 【Heat resistant handle and Rapid Heating】：Electric melting tin furnace adopts metal heating core (nickel chromium wire), rapid heat transfer, rapid temperature rise. Outer double-layer sleeve design, longer service life. The handle is made of high temperature resistant material, it will not get hot, it is comfortable to hold and easy to carry..
  • 【Temperature Regulation Design】：Non-polar knob design of the lead melting pot, can be adjusted at will from 302 fahrenheit to 842 fahrenheit. So to prevent gets too hot, you don’t need to be unplugged periodically to keep it in your working temperature range. Equipped with a one-button switch design, safe and convenient. Melts fast and keeps steady temp for casting a clean cast! Equipped with heat shields, you don’t have to worry about your workbench!.
  • 【Notice】：When you use it for the first time, it will emit smoke. Because initial heating burns off manufacturing oils. this is normal phenomenon！When you ha....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

ANYCUBIC 3D Printer Resin 355-410nm Fast UV-Curing Photosensitive Wax Resin for SLA/LCD 3D Printing Rapid Precise Printing Craftsman Liquid for Jewelry Anime Figure Garage Kit and Character Design

  • High Precision and Low Shrinkage: Anycubic wax 3D Printer resin is designed for improving volume shrinkage during the photocuring process, no....
  • More Smooth and Delicate Surface: With the excellent fluidity of Anycubic craftsman resin, it can quickly infiltrate models and cure them into shapes,....
  • Fast Curing and Great Stability: The uv-curing Craftsman resin can be rapid prototyping, reduce the forming time, the end product is flexiable and not....
  • Wide Compatibility and Applications: Anycubic wax resin is compatible with 355nm~410nm wavelength and suitable for most LCD/SLA 3D printers. It is....
  • Low Odor: It has a slight smell, which is between ordinary resin and plant-based resin. Please wear the mask and gloves to avoid skin touch. The resin....
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock