Categories

Best Raspberry Pi B Heatsink And Fan

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

GeeekPi Raspberry Pi 4 Aluminum Heatsink with PWM Controllable Fan, Raspberry Pi 4 Armor Lite Heatsink with PWM Speed Control Fan for Raspberry Pi 4 Model B

  • Compatible with Raspberry Pi 4 Model B --- This Armor Lite Aluminum Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version..
  • Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS..
  • Good Heat Dissipation Effect --- With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly..
  • Lightweight and Easy to Install --- With screwdriver and 2pcs screws, it's easy to fix the heatsinks with Raspberry Pi Board..
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black (P252)

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

Raspberry Pi 4 Cluster Case, iUniker Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)

  • Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
  • Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
  • Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
  • With Quiet Cooling Fan, it can drop the temps for your Pi.
  • Include Raspberry Pi Heatsink, Better Cooling Experience.
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock

Argon NEO Raspberry Pi 4 Case | All Aluminum

  • Argon NEO is a thoughtfully designed aluminum Raspberry Pi 4 case enclosure for the Raspberry Pi 4 with removable magnetic cover.
  • Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
  • Keeps RPI 4 cooler with the aluminum metal case acting as heatsink. Keep it even cooler with Raspberry Pi accessories like Argon Fan Hat..
  • Easy access to ports connects power cable, external HDD or SSD, display screen and other official RPI and GPIO accessories..
  • Works best with Raspberry OS, Kodi, LibreElec, Ubuntu, Retropie, and other Debian based OS.
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

GeeekPi Raspberry Pi 4 Fan Heasink, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 4B/3B/3B+ (B Plus)

  • It's fit for Raspberry Pi 4B and Raspberry Pi 3B+.
  • It's compatible with most of cases in the market.
  • Use CNC Machining manufacturing technology for Aluminum heatsink.
  • With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation.
  • The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board.
  • Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink For Pi 3B+, 2x Thermal Tapes for Pi 3B+,2x Thermal Tapes for Pi 4B.
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

Geekworm Raspberry Pi 4 Case, Pi 4 Heatsink Case, Raspberry Pi 4 Aluminum Passive Cooling Case with Heatsink Pillar for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only (P232)

  • New version Raspberry Pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 2GB 4GB 8GB version.
  • Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink..
  • Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable and TF card slot reserved..
  • Made of high quality aluminum material. With 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption..
  • Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
Check Stock