Categories

Best Raspberry Pi Board

Treedix Compatible with Raspberry Pi 3B/3B+/4B GPIO Breakout Expansion T-Type Board with 20cm FC40 40pin Cable Development Board

  • The small board is connected to the 40-pin GPIO connector on the Raspberry Pi, and these pins are assigned to a breadboard-friendly layout and spacing.
  • T-shaped expansion board and breadboard make the experiment more convenient.
  • Using the GPIO expansion board, you can connect all versions of the Raspberry Pi to various sensors and electronic components.
  • Purpose: It can be used for the pin experiment of the experiment board, adding experimental items, etc., and it can be connected to the pin very reliably by simple soldering by yourself. 5. Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
  • Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
Check Stock

sb components Raspberry Pi Pico Board with Raspberry Pi Pico Zero Board, Pico Expansion Module Board for RPi Pico, Raspberry Pi Pico Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Pico Zero Board provide long term safe, compact and convenient housing to your DIY circuits.
  • Pico Zero Board is specifically made to work with the Raspberry Pi Pico Board.
Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Pi 4B Case with Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply, USB Card Reader, 6 Feet Micro HDMI Cable, 7.8 Inch Micro HDMI to HDMI Adapter Cable (4K Ultra HD)

  • Upgrade Raspberry Pi 4 Case - Acrylic 9 Layers Case for Raspberry Pi 4 Model B (Raspberry Pi 4 Board Not Included) with Good Appearance. It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot..
  • Pi 4 Case with Better Cooling System - Raspberry pi 4 quite cooling fan and 4 pcs aluminum heat sinks are good for heat dissipation of Raspberry Pi board..
  • Raspberry Pi 4 Power Supply with ETL Certification - ETL LISTED 3A USB-C power supply for Raspberry Pi 4. With on/off switch, it's convenience to power on and power off your RPI 4. Input: 100-240V AC, 50-60Hz, 0.8A. Output: 5V 3A. Cable length: 59 inch..
  • 6 feet/ 1.8 m Micro HDMI to HDMI Cable for Raspberry Pi 4 - Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 7.8 inch Micro HDMI to HDMI Adapter Cable..
  • 100% Customer Satisfaction Guaranteed. If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution..
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

sb components Raspberry Pi Pico Board with Raspberry Pi Pico Breadboard Kit, Multi-Purpose Raspberry Pi Pico Breadboard Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard”.
  • Pico Breadboard Kit consists a programmable buzzer, 4 programmable LEDs, 4 pushbuttons, and dedicated 5V, 3v3, and GND pins at a single place.
  • Raspberry Pi Pico Breadboard Kit is specially made to work with the Raspberry Pi Pico Board.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

  • Works with the Official 7" Raspberry Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
  • Includes a cooling fan with rubber vibration mounts.
  • Works with Raspberry Pi HAT boards and has secondary mounting points for your own development board.
  • Raspberry Pi, Raspberry Pi camera, and Raspberry Pi display not included.
  • Port blocking part to cover the Raspberry Pi ports included.
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Vilros 8 Inch 1024x768 Screen and Stand for Raspberry Pi 4 & Raspberry PI 3

  • 8 Inch screen with 1024x768 resolution is encased in stand with a removable box on the back to hold the Raspberry Pi.
  • Connects to a raspberry pi via simple HDMI Connection-Inlcudes a Micro HDMI-HDMI Cable to connect the screen to a PI 4 and also includes a standard HDMI cable to connect a PI 3 to the Screen.
  • Includes double corded DC and USB-C power supply that powers the screen and the pi board- also Includes a micro-USB-USB-C Adapter to be used for pi 3.
  • Turn Your Raspberry Pi Board into a 8 inch desktop!!.
  • Note: Screen is a standard screen, this is NOT a Touchscreen---Does NOT include Raspberry Pi Motherboard.
Check Stock