Categories

Best Raspberry Pi Dac

XYGStudy for Raspberry Pi 4B/3B+/3B/2B/B+/A+ Jetson Nano High-Precision AD/DA Expansion Board Sheild Onboard ADS1256 DAC8552 ADC DAC Jumper

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.
Check Stock

Raspberry Pi Expansion Board Raspberry Pi HiFi DAC+ HD Audio PCM5122 24 bit Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W

  • With DAC All function PCM5122 chip and I2S Input, X920 DAC+ board is a perfect HiFi / DAC+ / HIFI / Full HD audio expansion board for Raspberry Pi 3....
  • After using X920 board, User can coordinate with the broadcast system (such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.) to set up your own....
  • X920 is available with RCA, 3.5mm phone jack output connectors and built in IR receiver (Vishay TSOP34838).
  • Full HD audio up to 24 bit/192kHz playback and Class leading audio (112db SNR, and 93db THD) function, Integrated hardware volume control with TI's....
  • Powered by Raspberry Pi, no external power requirements, Conforms to the Raspberry Pi hardware attached on top (HAT) specification..
Check Stock

HiFiBerry DAC+ RCA Version

  • This is our HiFiBerry DAC+ with a pair of RCA jacks..
  • It can be simply plugged onto your Raspberry Pi Model A+,B+ or 2B, it does not need any soldering..
  • Note that this model is not compatible with older Raspberry Pi model A and B units!.
  • Connects directly to the Raspberry Pi, no additional cables needed.
Check Stock

High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules.
Check Stock

anidees Aluminum Open Frame case for Raspberry Pi 4 Model B/ASUS Tinker/Google Coral Dev Board, Support Seeed ICE Tower CPU Cooling/HiFiBerry DAC+Pro 2 (Pi4, DAC NOT Included)– Black(AI-OP-FR)

  • Panoramic Open frame design: It comes with 6 mm aluminum plus shockproof copper feet stand to provide durability and flexibility..
  • Compatible with Raspberry PI4 B/ PI3 B/ PI3 B+, ASUS Tinker Board S, Google Coral Dev Board, (support the screw hole dimension of the board : 58 x 49mm).
  • Unlimited flexibility: Harmonious, refined and striking design with easy access to all inputs and outputs, support powerful speeed ICE Tower CPU Cooling Fan, HiFiBerry DAC+Pro / NanoSound DAC2.
  • Raspberry Pi, DAC board, Cooler is NOT INCLUDED..
Check Stock

AITRIP 2 pcs PCM5102 I2S IIS Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module Compatible with Arduino Raspberry Pi

  • The DAC Module provides a super affordable high-quality DAC Compatible with Raspberry Pi..
  • The stereo jack comes soldered onto the board already,Line out stereo jack,HAT format board..
  • Uses the PCM5102A DAC to Compatible with Raspberry Pi I2S interface.
  • Since it's digital audio,it sounds really good,much better than the onboard analog audio..
  • Applications: A / V Receiver DVD,BD player HDTV receiver Applications Require 2VRMS audio output.
Check Stock

Geekworm DACPi Ultra-Thin Audio Player Kit for Raspberry Pi 4 Model B NUC Style Aluminum Alloy Case|X950 PCM5122 DAC| Passive Cooling Embedded Heatsink for Raspberry Pi 4B

  • 【DACPi Aluminum Case】Ultra-Thin NUC Aluminum Alloy Case, specially designed for Raspberry Pi, reseved all interface of Pi 4..
  • 【X950 DAC Shield】 Uses a Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also provides a....
  • 【Cooling Solution】Considering that the cooling fan will interfere with the sound quality, only use P165-B embedded heatsink to dissipate heat,....
  • 【How to Power】 5Vdc +/-5% , ≥3A (Via Type-C of Pi 4).
  • (Recommended to use Geekworm UL listed 5V 4A Type-C power adapter(ASIN:B09J856PND)..
  • 【Compatibility】Only for Raspberry Pi 4 (NOT include Pi 4 board), compatible with Volumio, Rune, OSMC, MoodeAudio, Raspbian Jessie, Openelec etc..
Check Stock

HiLetgo PCM5102 I2S IIS High Quality Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module for Arduino Raspberry Pi

  • 1.The DAC Module provides a super affordable high-quality DAC for the Raspberry Pi..
  • 2.Since it's digital audio, it sounds really good, much better than the onboard analog audio..
  • 3.The stereo jack comes soldered onto the board already..
  • 4.Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface.
  • 5.Since it's digital audio, it sounds really good, much better than the onboard analog audio. The stereo jack comes soldered onto the board already..
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Taidacent Raspberry Pi HiFi DAC Raspberry Pi 4B/3B+/3B/2B/ZERO HiFi Dual Decoding DAC Raspberry Pi I2S Audio RPI DAC for Network Digital Audio Player

  • Support Raspberry Pi 3B+ and compatible 3B BZERO(W).
  • Double DAC straight out of the super thrust, Can directly push 32 ohm (R) headphone.
Check Stock

Acrylic Case for InnoMaker DAC Hat HiFi Audio Module Works with Raspberry Pi 4 3B+ 3B 3

  • Acrylic Case for innomaker HiFi DAC HAT only, Not support innomaker DAC PRO Hat and other brand DAC Hat.
  • There are protection film on both sides of all acrylic plate. You need to peel it off before assembling the case..
  • For the case assemble,Please refer to the DAC hat usermanual.
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock