Categories

Best Raspberry Pi Light Sensor

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

  • Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
  • Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
  • 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
  • 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
  • Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
Check Stock

SunFounder Raspberry Pi Ultimate Starter Kit for Raspberry Pi 4B 3B+ 400 with PiCrawler AI Robot kit for Raspberry Pi

  • 【Ultimate Raspberry Pi Kit】SunFounder Raspberry Pi Ultimate Kit is suitable for all users, from beginners to advanced programmers. Containing a full range of components and sensor modules, the suite of 131 example projects will maximize the functionality of all Raspberry Pi models..
  • 【337 Components and IoT Modules】Comes with all the necessary components and IoT modules for learning application programming and exploring creative prototyping, such as: camera module, speaker, dot matrix module, I2C LCD module, infrared sensor, accelerometer, 9G servo motor, and many more..
  • 【Raspberry Pi Robot】The PiCrawler is a flexible AI robot kit compatible with Raspberry Pi 4B, 3B, 3B+ and 2B (Raspberry Pi not included). Suitable for adults and teens, the PiCrawler is the ideal platform for learning robotics programming, OpenCV, TensorFlow and Deep Learning..
  • 【Various Actions】The Raspberry Pi Robot Kit can be programmed with different actions (13 actions examples provided for your reference, such as: push up, twist and wave etc). You can also customize the actions according to your needs..
  • 【One-stop Online Learning & Programming】SunFounders online learning platform provides a professional one-stop shop for programming the Raspberry Pi. With detailed ....
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

SunFounder Raspberry Pi Car DIY Robot Kit for Adults Picar-s,Visual Programming with Ultrasonic Sensor Light Following Module Line Following Module

  • STEM ROBOTICS KIT - A complete rpi robot kit based on Raspberry Pi. It’s funny to assemble it.( (Compatible with RPi 4B/3B/3B+/2B/2B+, Raspberry Pi....
  • EASILY CODING - Python code: Great for web development.
  • Dragit: base on Snap!, fun and simple GUI programming..
  • VARIOUS SENSORS - The raspberry pi car comes with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower..
  • SOLID PLATES - Upgrade durable and shatterproof plate. And new style Servo,the MAX torque of the clutch gear digital servo is up to 1.6KG. It rotates....
  • EASY OPERATION - Elaborately-written user manual and published video for you to easy build your own sensor car robot..
Check Stock

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock

Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens Compatible with Arduino UNO Mega2560 Board and Raspberry Pi Pico

  • Compatible with Arduino, Raspberry Pi Pico, MCU, Raspberry Pi, ARM, DSP, FPGA platforms.
  • 2 megapixels image sensor OV2640, build-in 650nm IR block filter, visible light only.
  • M12 mount or CS mount lens holder with changeable lens options.
  • I2C interface for the sensor configuration，SPI interface for camera commands and data stream.
Check Stock

Arducam for Raspberry Pi Ultra Low Light Camera, 1080P HD Wide Angle Pivariety Camera Module Based on 1/2.8Inch 2MP STARVIS Sensor IMX462, Compatible with Raspberry Pi ISP and Gstreamer Plugin

  • This camera is a new member of Arducam Pivariety series, which adopts an IMX462 low light sensor and also supports hardware ISP functions like AEC/AGC, etc. That is to say, with this Pivariety, you can get much more decent image quality than the Official cameras in low light conditions..
  • Shot Image and Video: Still image resolution of 2MP 1920×1080.
  • ISP output image format of JPG, YUV420, RAW, DNG.
  • Adjustable frame rate, up to 60fps@1080P.
  • ISP Output video Format of MJPEG, H.264..
  • Ultra Low-Light: IMX462 Color COMS sensor produces the camera capture the minimum illumination 0.01Lux, which gives you clearer visual joy for low light and night vision..
  • Lens SPEC: M16 lens mount, HFoV of 92deg, F/0.95 wide aperture ensure enough amount of light that can enter, which enhance the ultra-low light function of this camera module..
  • Compatibility: Supports Raspberry Pi 4, Pi 3/3B+/3A+, and other A & B models (Doesn't support Raspberry Pi 2B and Pi Zero). Compatible w/ all libcamera-based apps maintained by the RPi foundation, like Gstreamer, OpenCV etc. NOTE: Pivariety can only work with libcamera instead of raspistill application..
Check Stock

SunFounder RasPad 3.0 - an All-in-One Raspberry Pi 4B Tablet with Raspberry Pi Ultimate Starter Kit

  • 【PORTABLE RASPBERRY PI TABLET】An ideal programming Raspberry Pi tablet perfectly compatible with Raspberry Pi 4B. RasPad with internal 10.1 inch IPS Pi touchscreen LCD monitor, high resolution of 1280×800 pixels, 10-finger touch, 5 hours long battery life. Easily assembled with 2 steps to get started anytime anywhere..
  • 【ABOUNDANT APPLICATION】Compatible with Arduino, Raspbian, Ubuntu Desktop, Chromium OS, Android and more... Realize A Tablet to Program & A Remote Controller & A Spare Display. Besides programming, RasPad can be as a good Remote Stream Display to make 3D print/ play games/ build IoT projects/ learn Scratch 3.0..
  • 【RASPAD3.0 VS Other Computers】As an All-in-one Raspberry Pi tablet, RasPad 3.0 has the better neatness and portability compared with other computers. With great battery management, built in speakers, rotationable use and cover protection. We also added a TF card extension design. Users can quickly replace the Micro SD card without opening the back cover..
  • 【Ultimate Raspberry Pi Kit】SunFounder Raspberry Pi Ultimate Kit is suitable for all users, from beginners to advanced programmers. Containing a full range of components and sensor modules, the suite of 131 example projects will maximize the functionality....
Check Stock

Raspberry Pi HQ Camera Module with Case for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Support C- and CS-Mount Lenses, Alternative for Raspberry Pi Camera Module V2 (8 Items)

  • This Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation.It is compatible with All Raspberry Pi series boards (Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH,etc.).
  • Higher Resolution & Sensitivity Camera Module---Compared To 8MP Of Normal Raspberry Camera, The High Quality Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect..
  • It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work..
  • It could be an ideal alternative for the Raspberry Pi Camera Module V2. It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity..
  • Package Content: 1.Raspberry Pi High Quality Camera main unit. 2.C-CS adapter. 3.Dust cap. 4.FPC ribbon. 5.Screwdriver. 6.Packing box. 7.Raspberry Pi Zero V1.3 Camera Cable 15cm. 8.Raspberry Pi Camera Matching Case..
Check Stock

DORHEA 5PCS Raspberry Pi 4 Camera Video Module 5 Megapixels 1080p Sensor OV5647 Mini Webcam with 15 Pin Ribbon Cable for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B, Pi 3 B+, Raspberry Pi 4

  • Camera Specifications -- The high-definition video camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording, with 5MP OV5647 1080p webcam sensor..
  • Fixed Focus -- The sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens..
  • Compatible With -- High-Definition video camera for Raspberry Pi Model A, B, B+, Raspberry Pi 2 B, Raspberry Pi 3,3 B+ ,Pi 4..
  • CSI Interface -- This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor, high data rates, and it exclusively carries pixel data..
  • 15 Pin Ribbon Cable -- 15-pin MIPI camera serial interface - plugs directly into the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm, making it perfect for mobile, you can be applied to image recognition and image tracking, etc..
Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • ... fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
  • This is a practical design for you to take some beautiful photos of your family.
  • Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
  • Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
  • Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring you high-definition images for raspberry pi is suitable for aerial photography, car real-time photography, indoor and outdoor photography, video recording, travel vlog and so on.
Check Stock

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock