CanaKit Raspberry Pi Zero W Wireless Complete Starter Kit - 16 GB Edition

  • Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
  • Official Raspberry Pi Zero Case with 3 Interchangeable Lids.
  • SanDisk 16 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
  • CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
  • USB OTG Cable, Mini HDMI Adapter and Heat Sink.
Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • 【NASPi Gemini Overview】Geekworm NASPi Gemini offering an easy and fast way to create your home media center and building NAS or Web server for your Raspberry Pi 4 with dual 2.5 inch SATA HDD/SSDs..
  • 【What's Included】NASPi Gemini is composed of three parts: X882 dual 2.5" sata hdd storage shield, NASPi Gemini metal case, heat dissipation system(include a 4010 PWM fan with metal fan bracket), and they will be packed into NASPi Gemini metal case to get a complete NASPi Gemini.
  • 【How to Power NASPi Gemini】5Vdc +/-5% , ≥4A (Via USB C or DC jack of X882).
  • Recommend to power via DC jack if meet any I/O error. DO NOT power via the USB C of Raspberry Pi 4!!!.
  • 【HDD/SSD Thickness Supported】NASPi Gemini supports HDD/SSD with a thickness not exceeding 16mm, 2.5" HDD/SSD on the market are 7mm, 9.5mm, 12mm and 15mm thickness.(Recommend to use HDD.).
  • 【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
  • 【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
  • 【Button Switch Operation】Press to turn on.
  • Press and hold for 1~2 seconds to reboot.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

  • 5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
  • 5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
  • an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
  • Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.
Check Stock

CanaKit Raspberry Pi Zero W (Wireless) Complete Starter MAX Kit with Premium Black Case (64GB Edition)

  • Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
  • CanaKit Premium Black High-Gloss Raspberry Pi Zero Case.
  • Includes Samsung 64 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
  • CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
  • USB OTG Cable, Mini HDMI Adapter, GPIO Header.
Check Stock

Libre Computer Le Potato Mini Single Board Computer with USB WiFi 4 and Heatsink (2GB WiFi 4, Libre Blue)

  • ...Power supplies with insufficient power will experience voltage drops that cause instability and random application crashes or boot issues. For additional assistance, please use hub.libre.computer for guides and end-user support..
  • COMPATIBILITY WITH PERIPHERALS DESIGNED FOR RASPBERRY PI: Most USB based peripherals are directly supported. The GPIO header maintains the same layout for hardware I2C, SPI, PWM, and UART compatibility. I2S, PCM, and SDIO do not share the same pins so most audio peripherals will need to be re-routed. Le Potato features additional GPIOs and SARADC pins on separate headers..
Check Stock

WayPonDEV Banana PI BPI M2+ (M2 Plus) Allwinner H3 Quad Core Single Board Computer Supports Raspbian and Android, Ubuntu Linux

  • Banana PI BPI-M2+ is the open source hardware platform,Banana PI BPI-M2+ is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm.
  • Connectivity: SDIO wifi & BT4.0 module on board, also supports 10/100/1000 Ethernet.
  • 4K Display Support: It supports 1080P high-definition video output and 4K support.
  • Operating System: Banana Pi BPI-M2+ runs on Android, Debian Linux, Ubuntu Linux, Raspberry Pi Image (Raspbian) and other images..
  • Wiki: https://wiki.banana-pi.org/Banana_Pi_BPI-M2%2B. If you have any questions, please post them on our forum: https://forum.youyeetoo.com/.
Check Stock

Jstvro Duplex MMDVM Hotspot Board Radio Station WiFi Digital Voice Modem P25 DMR Hotspot Support YSF Raspberry Pi OLED Antenna (Duplex-Board-OLED-Antenna)

  • Suit for Raspberry Pi 3,Raspberry Pi Zero W. Support:D-STAR, P25, DMR and work with UHF. In Single mode support both Uhf and Vhf.
  • Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
  • Best customer service: feel free to contact us,we will reply soon within 8 hours..
Check Stock

YaFex Case for Raspberry Pi 4 B with Cooling Fan and Fan Guard,4 Pcs Heat Sinks,5V 3A USB-C Power Supply, USB Card Reader,1.5M Micro HDMI Cable and HDMI Adapter

  • 【Latest Version Raspberry Pi 4 Case】Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B. Made of acrylic, the Raspberry Pi 4B case won’t block Pi’s Wifi or Bluetooth signal..
  • 【Easy to Access to All Ports】Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • 【Keep Raspberry Pi 4 Board Cooling】Specially come with quiet cooling fan and 4 pcs heatsinks for CPU/ROM/RAM quick cooling.Also included a fan guard to protect the fan..
  • 【1.5M Micro HDMI Cable and HDMI Adapter】1.5M Micro HDMI to HDMI Cable for Raspberry Pi 4. Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 1.5M Micro HDMI to HDMI Adapter Cable..
  • 【Excellent Customer Service】If you have any questions about the case installation, please feel free to contact us. We will teach you to use our products within 24 hours..
Check Stock

Cable Matters 3-Pack Short USB to USB Extension Cable 3 ft (Male to Female USB Extender Cable, USB Extension Cord)

  • Cost-effective 2-pack male to female USB cable provides a spare cable for connecting or charging USB devices.
  • A lifetime warranty is included with this USB charger extension cord for peace of mind when purchasing.
  • USB 2.0 compatible USB female to male cable as a SNES controller class USB gamepad cable, Raspberry Pi3 USB controller cable, Arduino USB cable, USB LED light strip cable, WiFi USB cable, Garmin USB ANT Stick cable, USB 2.0 printer cable, USB 2.0 hub cable, and more.
Check Stock