Best Raspberry Pi Zero Case Dimensions
Adafruit PiTFT 2.2\ HAT Mini Kit - 320x240 2.2\ TFT - No Touch
- Plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+.
Check StockDorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero
- 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
- Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
- Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
- Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)
- Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
- Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
- This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
- With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
- Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
Check Stock7 inch 1024×600 Resistive Touch Screen HDMI Interface LCD Raspbian Ubuntu Driver Mini PC Computer Monitor Supports Raspberry Pi 4 3 2 Model B B+ @XYGStudy
- Part Number: 7inch HDMI LCD. 7inch IPS screen, 1024x600 hardware resolution.
- 1024x600, 7inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi. Directly Pluggable: Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+....
- Compatible and Direct-connect with any revision of Raspberry Pi (Additional HDMI Cable Required: Raspberry Pi Zero WH / Zero W / Zero).
- Driver Provided: supports Raspbian / Ubuntu / Kali / Retropie. Supports future version which is backward compatible.
- Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required.
Check StockCanaKit Raspberry Pi Zero W Wireless Complete Starter Kit - 16 GB Edition
- Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
- Official Raspberry Pi Zero Case with 3 Interchangeable Lids.
- SanDisk 16 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
- CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
- USB OTG Cable, Mini HDMI Adapter and Heat Sink.
Check Stock
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano
- Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
- Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
- Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
- This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
- With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
- Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock
Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)
- 【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi Zero 2W/Zero W which can control a computer using a web browser!.
- 【Compatiblity】for use with Raspberry Pi Zero 2W or Raspberry Pi Zero W only, NOT support Raspberry Pi Zero..
- 【Function】Remotely turn on/ turn off / restart your computer.
- reinstall the OS using the Virtual CD-ROM or Flash Drive.
- Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
- 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
- Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
- 【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
- 【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
- 【Extra Needed】Raspberry Pi Zero 2W/Ze....
Check StockArducam Raspberry Pi Camera Module 3 Wide, 120°(D) IMX708 Autofocus Pi Camera V3 with Acrylic Case, 15cm 15-22 Pin FFC Cable
- Compatible with all Raspberry Pi boards: Raspberry pi camera v3 works with all Raspberry Pi models, 4B/3B, Pi Zero W/2 W..
- Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images, 1080p50 max for video..
- The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images..
- Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration..
- Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero 2 w.
- also an acrylic camera case included, easily mount on any tripod with 1/4"-20 mounting screws..
Check StockAcrylic Case for InnoMaker AMP Hat HiFi Audio Module Works with Raspberry Pi 4 3B B+
- This Acrylic Case is only for InnoMaker AMP Hat HiFi audio module works with Raspberry Pi 4 3B B+ Pi2..
- About the AMP Hat: InnoMaker HiFi AMP Amplifier Module is a high-quality, highly efficient 25W Class-D power amplifier for the Raspberry Pi 4 3 B+ Pi Zero. It is the ideal choice for small room audio system..
- Get a stereo audio system by mount it onto your Raspberry Pi, only you have to do is connect your loudspeakers to our RPI HiFi AMP HAT module..
- RPI HiFi AMP Module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc..
Check Stock
GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)
- Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
- Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
- Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
- This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
- With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
- Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock
MakerFocus 2pcs Raspberry Pi 4B Fan DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler Radiator Connector Separating One-to-Two Interface for Raspberry Pi 4/ Pi 3/3B+ and Pi Zero/Zero W or Other Project
- √ Installation Screws Included: Don't need to purchase screws by yourself. Intimate service, easy to install!.
- √ Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!.
- √ Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use.
- √ Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 4B/ Pi 3/3B+ and Pi Zero/Zero W, Retro-flag NES-Pi case and Nes-pi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!.
- √ Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our....
Check StockCanaKit Raspberry Pi Zero W (Wireless) Complete Starter MAX Kit with Premium Black Case (64GB Edition)
- Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
- CanaKit Premium Black High-Gloss Raspberry Pi Zero Case.
- Includes Samsung 64 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
- CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
- USB OTG Cable, Mini HDMI Adapter, GPIO Header.
Check Stock
MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!.
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!.
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!.
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experien....
Check Stock
