Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT
- Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
- A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
- 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
- 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
- EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check StockWilliams B-52A 3/8-Inch Drive Round Head Ratchet
- Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
- Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check StockMapex S600EB Mars Double Braced Snare Stand - Black
- The Offset Multi-Step tilter enables players to fine their ideal snare drum angle while the die-cast basket adjuster will last for years without stripping or cracking..
- Mars Double Braced Ratchet Adjuster Snare Stand - Chrome.
Check StockGEARWRENCH 42 Piece Ratcheting Tap & Die Set Metric - 3886
- Die adapter works on round and hex shaped Dies.
- Ratcheting T-handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
- Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
- Die adapters work with the 3/8 Drive pass-thru ratchet and socket system as well as socket Accessories".
- Auto-locking feature allow the tap adapters to be removed safely.
Check StockRIDGID 38540 Manual Pipe Threader for Models 00-RB and 00-R Manual Ratcheting Tap Handle for Threading Dies Ratchet and Handle Only Small
- Easy to access ratchet knob on head of the ratcheting tap indicates forward and reverse.
- Die heads snap in from both sides and lock in place for faster size changes.
- Includes manually operated ratchet and handle only.
- 3-Foot threading ratchet handle provides leverage.
- RIDGID 38540 is for model 00-R and 00-RB manual pipe threading.
Check Stock
Rope Ratchet HH20 Hand Chain Hoists, Black
- THE BEST: The easy-to-use ROPE RATCHET is the answer to all your tie-down needs for work or play. Whether you need to hoist a bike, garage hoist, or a deer hoist for hunting we have you covered..
- BUILT TOUGH: The patented design and rugged construction lets you secure a wide variety of loads quickly and easily. Every ROPE RATCHET is made super tough so you can depend on it to work as a chain hoist, block and tackle, pulley system, or as a double pulley. Every ROPE RATCHET is made super tough so you can depend on it to take all the hard work you do. The outer casings are made from strong #6 - 33% Glass Filled Nylon with interior mechanisms of Die Cast Z. 250lb Weight Capacity.
- GET IT DONE: With the ROPE RATCHET you simply attach the two hooks and pull the loose end of the rope to get the secure tightness you need. Feel comfortable using it for a high lift, hand ratchet, or over the door pulley. With ROPE RATCHET Tie-Downs you never have to worry about stretching, snapping back or loosening..
- SAFE & SECURE: Your load stays secure because the rope automatically locks in place with every pull and stays locked until you release it by pushing the convenient Thumb Release Lever..
- TRUSTED: Carolina North Manufacturing warrants its products to be free of defects ....
Check StockGEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887
- Gearwrench Die adapter works on round and hex shaped dies.
- Gearwrench Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
- Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
- Die adapters work with the 3/8inch Drive pass-thru ratchet and socket system as well as socket accessories.
- Auto-locking feature allow the tap adapters to be removed safely.
Check StockGreenlee 7304 Knockout Punch Driver Kit
- Set contains 4 punch and die sets, and high impact plastic case.
- Use with battery-powered, hydraulic, ratchet or manual drivers.
- Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock
DP Dynamic Power 3/8'' Heavy Duty PRO Air Ratchet Wrench Professional Choice 55 ft-lbs
- 【3/8-Inch Air Ratchet Wrench】WORKPRO 3/8” air ratchet wrench can deliver up to 50ft.lb (68n.m) of torque at free speed of 160RPM. Powered by air, this ratchet wrench can tighten or loosen nuts and bolts quickly and efficiently, suitable for general engine repair, household projects and light industrial applications..
- 【F/R Knob】Adjusting the F/R knob on the back of the square drive can change the direction of the air ratchet wrench. Forward to tight the bolts and reverse to unscrew the bolts. Operating pressure: 90psi (6.3bar). Air consumption:4.7cfm(133.3l/min). Note: Using the sealant tape to avoid air leakage..
- 【360 Degree Adjustable Exhaust】 The exhaust of this item can be adjustable 360 degrees, allowing you to point it away from the work area and yourself. The air inlet filter could keep the die grinder from contamination. Note: Add oil regularly is needed for all air tools (lubricant included)..
- 【Ergonomically design】 This air ratchet operates smoothly and has a comfortable ergonomic grip. It measures 11 inches long and weighs 2.7 lb, small and nimble enough to access tight and hard-to-reach places easily, designed with soft rubber-coated grip and brings the experience of non-slip grip..
- 【Wide Applications】An air ratchet makes....
Check StockGEARWRENCH Angled Tip Pry Bar, 31\ - 82431
- Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
- Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
- Product 1: Die adapters work on round and hex shaped Dies.
- Product 1: Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories.
- Product 2: Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access.
- Product 2: Head rotates 180° through 14 locking positions for unparalleled access and leverage.
- Product 2: Compact design allows for work in tight spaces.
- Product 2: Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines.
Check Stock
uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle
- ✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
- ✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
- ✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
- ✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
- ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check StockSteel Dragon Tools® 12-R Manual Ratchet Pipe Threader Kit 418 Oiler 460 Chain Vise 2A Cutter
- Steel Dragon Tools 12R Manual Ratchet Pipe Threader Kit..
- SDT 12-R will thread 1/2-inch to 2-inch pipe..
- SDT 12-R comes with ratchet head, handle, steel tool box, six (6) die heads, and six (6) alloy dies..
- Includes a Steel Dragon Tools 418 Oiler Bucket, 460 Tripod Chain Vise, and 2A Pipe Cutter..
- Will work with RIDGID 700 Power Drive Pipe Threader 41935..
Check StockAnna Griffin AG-523H Fancy Flip Card Kit Die Single
- 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
- Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock
