Categories

Best Reamed Hole Finisher Tool

Lystaii 24pcs Caulking Finisher Kit Caulk Nozzle Applicator Reusable Stainless Steel Caulking Nozzle Sealant Finishing Nozzle Caulking Scraper with Tape for Kitchen Bathroom Window Sink Joint

  • 24pcs Caulking Finisher Kit Includes: 14 x different sizes caulk nozzle applicator, 2 x universal caulking finisher nozzle, 2 x caulking scraper, 1 x....
  • Perfect Filling: With the 45 ° muzzle design can achieve perfect filling without causing messy and uneven finishes. They are reusable, can be used....
  • Material: The caulk nozzle applicators are made of high quality stainless steel, and the universal caulking finisher nozzles are made of plastic.....
  • 14 Sizes Available: Caulking finisher kit comes with 14 different sizes that achieve reliable sealing in most areas and angles. Dimensions: 35mm,....
  • Wide Using Occasions: the caulk finishing tool set can be widely applied for kitchen, bathroom, tank, door, window, tile, tank, sink joint filling....
Check Stock

3 in 1 Silicone Caulking Tools with Stainless Steelhead,Grout Removal Tool Easy & Convenient Multi-functional Corner Grout Scraper for Kitchen Bathroom

  • With 12 pcs blended in, this fashional-looking kit comes with 3 different tools – finisher, scraper, & remover..
  • Package contains:1 x Caulk remover. 1 x Caulk saw. 1 x two-mode scraper (Works as a “3 in 1” tool). 3 x Multi-functional finishing tools (14....
  • Two-mode switchable scraper of this silicone caulking tool can remove any old sturdy residual adhesive/glue or, sealant. Finally, with its replaceable....
  • Finishing plastic tools will expel the use of masking tape thus reduce the waste and cost. With available corner angle options, you can achieve your....
  • It’s a silicone sealant finisher, grout tool as well as an adhesive scrapper. Repairing the crack and fractures has been made easy around the –....
Check Stock

Caulking Nozzles, CHARMINER Caulk Nozzle Applicator, Reusable Caulking Nozzle 14 Pcs, Stainless Steel Sealant Caulking Finishing Nozzle for Kitchen Bathroom Window Sink Joint(Silver)

  • Fills Gaps Perfectly45muzzle design can easily smooth and fill gaps perfectly without causing chaos and uneven finishes. Caulking finisher can save a lot of time.
  • 14 Variety of SizesCaulking finisher kit comes with 14 different sizes that can easily satisfy sealing requirements in different areas and angles. Dimensions: 5, 6, 7, 9, 10, 12, 13, 16, 20, 25, 26, 28, 30, 35mm.
  • Good Tightness and ReusableMade of high-quality stainless steel, making it wear-resistant, not brushed, anti-corrosion, durable. The caulk nozzle finisher is easy to clean and reusable.
  • Wide Application The caulking tool set can be used for kitchen, bathroom, tank, door, window, kitchen, sink joint filling finishing.
  • Great DesignThe caulk nozzle applicator is a duckbill design, smooth and beautiful glue. Suitable for Most Areas and Angles.
Check Stock

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

  • Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
  • Dimension：Length of Tool Bar 5.91″(150mm) ，Length of wood handle：9.84″（250mm ），Overall length 15.75″(400mm).
  • Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point).
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

Caulking Finisher Tool, 2Pcs Silicone Caulking Finisher Scraper, Caulk Applicator Tool, Manual Tile Caulking Tool for Grout, Tiles, Wall Tiles, Home Improvement Tools

  • 【Caulking Finisher Tools: 】 It is a smooth sealing line and caulking line, which makes tile caulking easier and faster. It is suitable for most decoration of daily family houses, offices, storefronts, etc..
  • 【Durable: 】Caulking finisher scraper is made of high-quality polyester fiber material, high quality, good flexibility, wear resistance, and can be used for a long time..
  • 【Efficiency: 】 The gaps in the corners of the tile edges can be completed with the help of this caulking finishing tool, without wasting sealant and effectively improving the work efficiency of caulking. PLEASE NOTE: This is a caulking tool and does not come with tape sealant!.
  • 【Easy to Clean: 】The manual caulking tool can be cleaned with clean water, convenient and fast. Recyclable and applicable, saving cost..
  • 【Simple Operation: 】Fill 1/3 of the caulking agent, gently squeeze the thumb and index finger, and gently slide back against the tile seam, you can quickly fill the tile gap, making the home tile beautiful seam time-saving and labor-saving, Easy to use..
Check Stock

LLDSIMEX 28 Piece Transfer Punch Set 3/32 -1/2 by 64ths Plus 17/32

  • Heat treated tempered tool steel for longer life.
  • Wide set of transfer punches from 3/32" to 1/2" by 1/64".
  • includes 17/32" transfer punch，Length： 4.87 Inch.
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations.
  • Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull.
Check Stock

Mighty Mag Bundle Westhoff 400-1 Base with 45 Pounds Pull and 6 Mounting Locations and Taytools Dial Indicator with 1” Travel

  • Base has a rugged zinc diecast housing which contains a powerful high-quality magnetic assembly with 45 pounds of holding power. It is compact at 4-3/8” x 1” x 1-1/16”..
  • Kit comes with dial indicator with 0.0005" Resolution (half a thousandth), 1.00" total travel with accuracy guaranteed to 0.001" per 1".
  • It contains 6 mounting locations: three with 1/4-20 tapped holes, one 10-32 tapped hole, one 3/8” reamed home and one V-shaped hole to accommodate rods or accessories from 1/8” to 5/16” in diameter..
  • Will accommodate most lathe of machine shop devices and ensure they stay on place for accurate measurements. You will never stop discovering uses and applications for a Mighty Mag..
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

YUFUTOL Carbide Woodturning Tool Mini Size (3 Piece Set) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles Perfect For Turning Pens or Small to Mid-Size Turning Project

  • Combo Set Include: 3 Pieces Wood Turning Tools(Mini Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
  • Dimension：Length of Tool Bar 4.72"(120mm) ，Length of wood handle：7.87"（200mm），Overall length 12.6"(320mm).
  • Set includes 2pcs Round 12mm carbide cutters, 2pcs Square 11mm carbide cutters and 2pcs Diamond with radius cutters..
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
Check Stock

28pc Center Transfer Punches Set Machinists Tool Punch Stand Heat Treated Steel Black Industrial Oxide Finish

  • Indexed stand3/32" to 1/2" punches (by 64ths) ,plus Handy 17/32" punch.
  • Diameters 0.0025” undersized to facilitate USE.
  • Made of finest heat treated tempered tool steel, black industrial oxide finish,.
  • Eliminates the guesswork when transferring threaded, drilled, or reamed holes..
  • Punches holder (Plastic or Metal) may very, randomly pick up.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

HORUSDY 28-Piece Transfer Punch Set 3/32 - 1/2 Heat Treated Alloy Steel Forging

  • Each punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film..
  • Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations.
  • Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull.
  • Precision indexing punch for tool builders and mechanics.
  • Wide set of transfer punches from 3/32" to 1/2" by 1/64".
Check Stock

Oculus Rift CV1 Compatible Sensor Wall Mount/Display, Command Strip Included (Black, 4 Pack)

  • ENHANCE YOUR VR EXPERIENCE | Give yourself more play-space by replacing the Oculus Rift Sensor stands..
  • DAMAGE-FREE | Each display mount comes with 3M Command Strips to avoid damaging your walls and for an easy, quick set-up. Works on smooth, painted, or textured walls. Perfect for apartments and dormitories!.
  • STAY CALIBRATED | Avoid having to re-calibrate your sensors. Once on the wall they stay calibrated until removal..
  • MADE IN USA | Manufactured by 3D Lasers Lab. Hole reamed for a perfect fit. 3D printed at 0.2 mm resolution..
Check Stock