Categories

Best Rear Puller

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock

CRAFTSMAN V20 Cordless Hammer Drill Kit, LED Light, With 2 Batteries and Charger (CMCD711C2)

  • VERSATILITY: 10 PC kit is designed for a wide range of puller applications including wheel hubs, axles, oil seals, bushings, and more.
  • INCLUDES: 2 & 3-jaw internal and external pullers, rear axle puller, locking plier adaptor, and hook and dent puller.
  • Included case provides convenient storage.
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, Installation Hardware, Installation Instructions,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs

  • 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.
Check Stock

GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710

  • Rear-axle bearing puller set for use with most domestic cars.
  • Includes 3 pullers for greater versatility.
  • Packaged in durable, blow-molded case with easy-to-use instructions.
Check Stock

M31 Wiper Arm Puller Set 5 Pieces Combination Set of Cup Types and Puller Type for Windshield Wipers

  • Universal application and for both front and rear wiper arms with 4 cup type removers and 1 puller.
  • Bolts on cup removers and pullers are adjustable, widening the application range.
  • Cup diameter - Ø1.18, Ø1.37, Ø1.57, Ø1.81 inches.
  • Puller with detachable legs are suitable to work in tight spaces as found on some compact cars.
Check Stock

OTC 4579 9-Way Slide Hammer Puller Set , Black

  • OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
  • Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
  • Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
  • Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
  • Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.
Check Stock

Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)

  • ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case..
  • HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks..
  • PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool..
  • ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to d....
Check Stock