Best Rebar Anchor Cap

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock

Hilti 22-Volt Lithium-Ion 1/4 Hex Cordless SID 4-A22 Impact Driver Tool Body

  • Working time optimized for rebar and deep anchoring applications.
  • Package Quantity: (1) Foil pack, (1) Mixer and (1) Mixer extension.
  • Suitable for use in cracked and uncracked concrete with all anchor rods and rebar.
Check Stock

KEILEOHO 100 PCS Rebar Safety Caps,Yellow Plastic Mushroom Rebar Cap End Identification Bar Mushroom Building Construction Site Supplies Rebar Size: #3-#7, 10M - 25M

  • 100PCS MUSHROOM REBAR CAP - Widely used safety product that is used inside the construction industry to cover exposed rebar poles to prevent injuries..
  • REBAR SAFETY CAPS - Easily fits over exposed rebar poles to prevent rebar wear and damage..
  • YELLOW MUSHROOM CAPS - Yellow is a prominent color with high visibility..
  • HIGH QUALITY & WIDE APPLICABILITY - Made from durable plastic, Durable and suitable for construction sites. The rebar caps suitable for size:#3-#7, 10M - 25M steel bars..
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our Rebar Safety Caps, you can return the product and get a refund within 30 days from receiving. Just remember that your satisfaction is our first priority..
Check Stock

Pinnacle Mercantile 16 Pack Rebar Stakes J Hook Heavy Duty Steel Ground Anchors 12 inch Chisel Point End Made USA

  • HEAVY DUTY STEEL REBAR J HOOKS- Chisel pointed ends, for hard clay or rocky soils.
  • STAKE MEASUREMENTS-12 inches long top to bottom Inside of hook is 1-1/2 inch 3/8 inch diameter.
  • Bare Metal-Not Galvanized Will rust Our tumbling process may leave a black residue you can wiped off.
  • Set of 16 Steel Rebar J Hook Ground Anchor Stakes.
Check Stock

Buildalot Specialty Carbon Brushes 1642_Hilti_TE6-S GEERDET for Hilti TE6-S GEERDET Powertools - With Automatic Stop Cable and Spring - Replaces 265858

  • Working time optimized for rebar and deep anchoring applications.
  • Package Quantity: (1) Foil pack, (1) Mixer and (1) Mixer extension.
  • Suitable for use in cracked and uncracked concrete with all anchor rods and rebar.
Check Stock

HAKZEON 90 Packs Rebar Safety Caps, 2.36 x 2.16 Inch Plastic Rebar Mushroom Cap, Vivid Orange Protective Caps, Safety Product for Construction Industry, Fits Rebar Dia 10-30MM

  • HIGH-QUALITY PLASTIC MATERIAL - These reinforced rebar protection caps are made of premium industrial-grade plastics, which are very hard and durable with strong compression resistance, wear resistance, and will not be easily deformed. Work great covering iron stakes on the ground..
  • GREAT VISUAL REMINDER - The bright and lively orange provides you with a high visibility and is easy to find and use, which makes rebar end caps useful markers. Simply insert them into the end of the steel bar to prevent its wear and prevent injuries..
  • 90 PACKS FOR VARIOUS USES - Each rebar safety cap size is 2.16 x 2.36 inches ( 50x60 mm), and it is very lightweight but sturdy and durable to last, allowing you take it everywhere and store easily. Suitable for the rebar with a diameter in 0.39~1.18 inches (10-30mm)..
  • PRACTICAL AND MULTIPURPOSE - These rebar mushroom caps help protect the exposed rebar from wear and damage. They are very powerful protective covers, essential safety supplies for construction sites, and are also suitable for marking the end of the stakes in courtyard or garden..
  • SATISFYING SHOPPING - We HAKZEON store promises to provide you with a 100% refund guarantee, so that you enjoy a satisfactory shopping experience. If you have any product quest....
Check Stock

Galvanized Rebar Stakes 12 inch Heavy Duty Ground Stakes J Hooks for Camping Tent and Canopy Tent Stakes 12 Pack Silver

  • Suitable Size: Each yard stakes is 12 inch long top to bottom, 3/8 inch diameter. Hook inner diameter is 1.75 inch.
  • Material: Fence stakes are made of premium heavy duty steel rebar, premium quality and rust resistant finish makes them durable and can be reused for....
  • Easy to Use: Chisel pointed ends are suitable for hard soils or rocky. Metal stakes can go nice and deep. J hooks are used to fix fences, swings,....
  • Package: Each package contains 12pcs steel rebar J hook ground anchor stakes.
  • Multi-purpose: Help you to hold down the swing sets, slides, fences, yard decorations, tents, nets, prevent the tents or sheds from slipping away in....
Check Stock

AAGUT 8 Pack Galvanized Rebar Tent Stakes J Hook 12 Inch Chain Link Fence Stakes Canopy Yard Landscape Garden Staples Heavy Duty Metal Steel Ground Anchors

  • HEAVY DUTY STEEL REBAR STAKES J HOOKS- Chisel pointed ends for hard clay or rocky soils,Trampoline Wind Stakes,Swing set,Playset anchors..
  • GALVANIZED STEEL FENCE STAKES- Rust Resistant Finish, Years to use. Set of 8.
  • EASY USE -- Pointed End makes the rebar stakes penetrate into the ground easily..
  • TENT STAKE MEASUREMENT-12 inches long top to bottom, Hook inner Diameter is 1-1/2 inch, Steel Rod is 3/8 inch diameter thickness..
  • Multipurpose:Help you to hold down the swing sets,Ground Anchor, slides,fences, yard decorations, tents, nets,canopy stakes,Tent Stakes,Fence Stakes....
Check Stock

25x Rebar Impalement Safety Cap Type S - OSHA Square - (10M-25M) Rebar Size: #3-#7 (25 Pack)

Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

Goalrilla 9" Basketball Anchor System Installs In-Ground and Allows Goalrilla Hoop to Move with You

  • COMPATIBLE WITH ALL GOALRILLA HOOPS -Anchor System for All Goalrilla Goals.
  • DOESN’T FIT SILVERBACK OR GOALIATH -Not Compatible with Silverback or Goaliath Goals.
  • INSTALLS INTO THE GROUND - Installs In-Ground with Concrete and Rebar Steel Rods.
  • MOVE YOUR HOOP WHEN YOU MOVE HOMES - Allows your Goalrilla Goal to Move with You.
  • BACKED WITH OUR WARRANTY - 90-Day Limited Warranty.
Check Stock