Categories

Best Rebar Tying Tool

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

LTM CONCRETE Snap Rebar Chairs 2 inch (30 Pack) – Quick, Easy & Durable Support – Bar Sizes 3-5 - Heavy Duty Plastic Spacers - Made in USA

  • HEAVY DUTY: LTM Snap Rebar Chairs are built with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • VERSATILE: Our easy-to-use clips firmly hold bar sizes #3-5.
  • post-tension cables, smaller bars and mesh will easily rest inside them too..
  • EASY TO USE: LTM Snap Rebar Chairs are already inexpensive, but you’ll save even more in labor costs. Set an entire rebar grid in minutes and skip wire-tying altogether..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
  • ***NOTE: These chairs are built specifically to work in forms and on hard-packed surfaces. Their minimal footprint will sink if used on sand and other soft-earth applications..
Check Stock

LTM CONCRETE Snap Rebar Chairs 1.5 inch (30 Pack) – Quick, Easy & Durable Support – Bar Sizes 3-5 - Heavy Duty Plastic Spacers - Made in USA

  • HEAVY DUTY: LTM Snap Rebar Chairs are built with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • VERSATILE: Our easy-to-use clips firmly hold bar sizes #3-5.
  • smaller bars and mesh will easily rest inside them too..
  • EASY TO USE: LTM Snap Rebar Chairs are already inexpensive, but you’ll save even more in labor costs. Set an entire rebar grid in minutes and skip wire-tying altogether..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
  • NOTE: These chairs are built specifically to work in forms and on hard-packed surfaces. Their minimal footprint will sink if used on sand and other soft-earth applications..
Check Stock

Mophorn Rebar Tie Wire Coil 10 Rolls, Rebar Tie Tool 0.8mm Diameter, Rebar Tying Wire 110m Length, Rebar Wire for Automatic Rebar Tying Machine Supplies

  • Dedicated Device: It is suitable for various brands of rebar tiers on the current market, and ensures efficient performance without wire being jammed.
  • Premium Material: This rebar wire is made of high-quality low carbon steel. Through an elaborate process of drawing molding, acid pickling, high-temperature annealing, hot galvanizing, and cooling, the coated zinc layer is thick and corrosion-resistant..
  • Sustainable Lifecycle: The reusable wire spool is thickened and reinforced, which is not easy to crack the coil, and avoids the problem of getting rebar wire entangled.
  • the high-strength axle is uneasy to be damaged and has a longer service life..
  • Easy to Use: With good toughness and elasticity, it does not crack after repeated bending, which is easy to be shaped.
  • the wire coil is firmly bound, light in weight, convenient for transportation, and does not occupy space.
  • the rebar wire is finely polished with advanced technology, and the burr-free surface does not hurt hands..
  • Wide Application: Whenever you're thinking of tying wire, you will find it set a must-have for your work with various features. It is best for woven wire mesh, handicrafts, gardening, product ....
Check Stock

FVIEXE 4PCS Rebar Tie Tool, Automatic Rebar Tie Wire Twister with Rubber Handle, Rebar Wire Twister Pull Tie Wire Twister Concrete Metal Wire Twisting Fence Tool (Curved and Straight Hook)

  • High Quality: Premium Steel Material, can withstand large forces.
  • Ergonomic Rubber Handle, ensure a secure comfortable grip.
  • Threaded and Rebounded Structure, automatically bounce back after tension, eliminate the winding process.
  • Semi-Automatic Design: Rebar tie tool can be fastened and automatically returned to the position (automatically recoil and reload), lessens repetitive actions and relieves strain on your hands and wrist. A good tool for saving efforts and improving work efficiency.
  • Easy to Use: Rebar twisters can safely and easily hold the rebars together. Just pull the steel wire through the hook to make the coil rotate to achieve the binding.
  • Wide Application: Rebar tie tools are designed for holding the bars and other wires together, widely used for rebar lashing on construction sites, home garden fence binding, sandbag closing, etc..
  • 2 Different Styles Rebar Tools: You will receive 4PCS wire twister tools including 2PCS curved hook and 2PCS straight hook. Straight hooks are suitable for most functions, and curved hooks are more suitable for grid fence fixing.
Check Stock

CCTI Rebar Tie Wire - 16 Gauge Black Soft Annealed 3.5 lb. Roll (Approx 340 Ft) - 1 Pack

  • Premium Quality - Soft Annealed Rebar Tie Wire.
  • Roll Dimension: OD 4.6" - Width 5.5" - Round Hole 1.9".
Check Stock

Facikono Fishing Quick Knot Tools Fly Fishing Nippers & Retractor Buckles Fishing Hook Line Tying Tool, 4pcs

  • What You Get: 2 sets fly tying equipment in total. Each set includes a fishing knot tying tool and a retracter buckle. This fishing tool designed for fly fishing, ice fishing and kayak fishing..
  • How to Tie Knots: Take fishing line through the hook eye and place the line over thumb rest and through the notch.
  • then wrap line around notch about several time towards thumb rest and hold the line in place.
  • next take the end of the line through the coiled line.
  • and take out the line from the tool and use D-ring to further tighten knot.
  • finally use fishing nipper to nip end of line..
  • 4 in 1 Fly Tying Tool: A fishing clipper for nipping end of your line, which is covered with non-slip red rubber to hold comfortably and firmly by wet hands.
  • A sharp needle for cleaning jig hook eye, a hook sharpener, a quicker knot tool combo for knot tying and a D-ring for tightening knot..
  • Multifunctional Retracter Buckle: Telescopic buckle is perfect balance of good tension and retracting with retractable 24.4in nylon string inside. The open can easily attach to fly vest, waist, backpack, fishing tackle bag and the bottom snap connected with the nylon string can link with fishing items or daily stuffs, keep your fishing accessories secured..
  • Fisherman Clever Tool: Stainless stee....
Check Stock

LTM CONCRETE Dually Rebar Chairs (12 Pack) – 7 Heights in 1 Chair - Quick, Easy & Versatile Support – Vertical & Horizontal Applications – Made in USA

  • EXTREME VERSATILITY: The patented Dually is the only rebar spacer of its kind – one chair holding bars at many different heights! Clips will firmly hold #3-6 bars at 1”, 1 ½”, 2”, 2 ¼”, 2 ½”, 3”. Turned on its side, Dually will support any resting mesh or bar at 2 inches (up to #12)..
  • WIDE BASE: Works on grade, Dually features a wide base that prevents sinking and tipping on soft surfaces. It also includes plenty of flow-through spacing for aggregate and concrete..
  • HEAVY DUTY: This chair is made with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • EASY TO USE: Set an entire rebar grid in just minutes and eliminate the need for wire-tying. Dually is already low-priced, but you’ll save even more in labor costs..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

Charniol Tie Fast Knot Tyer Fishing Knot Tying Tool Quick Tie Fishing Knot Tool Nail Knot Tying Tool for Hooks, Lures and Lines, Fly Fishing Angler Accessories, Silver

  • Knot tying tool: you will receive 1 piece of fishing knot tying tool, which is well packaged during the transportation process, and the delicate knot tying tool is easy to use and makes you enjoy fishing time.
  • Sturdy and reliable: the fishing knot tool is made of quality metal material, with beautiful silver and smooth appearance, not easy to break or rust, not easy to corrode or deform, long lasting and you can use the fishing tools with confidence for a long time.
  • Proper length: the tie fast knot tying tool measures approx. 10 cm/ 3.94 inches in length, and the small size is portable, so that the fly tying tools are convenient to carry without taking up too much space in your bags.
  • Practical to use: the nail knot tool can fasten the line firmly in a few minutes and don't worry about the knots coming undone, and the tie fast tool can avoid pain in your fingers and hands, nice accessories for fly fishing anglers.
  • Multi functions: the quick knot tool is an essential knot for most fishing lines, and helps you to fly fishing successfully, and the fly fishing knot tool can be applied to tie a number of different varieties of secure nail knots.
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Stainless Steel with Leather Sheath

  • AN ICON UPDATeD: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 TOOLS IN 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • OUR GUARANTEE: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • STRONGER DESIGN: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • ALWAYS ON HAND: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Stainless Steel with Nylon Sheath

  • AN ICON UPDATeD: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 TOOLS IN 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • OUR GUARANTEE: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • STRONGER DESIGN: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • ALWAYS ON HAND: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Coyote Tan with Nylon Sheath

  • An icon updated: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 tools in 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • Our guarantee: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • Stronger design: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • Always on hand: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock

SAMSFX Fishing Line and Hook Knot Tying Tool Kit 3 Knot Tyers with Zinger Retractor

  • 4 fly fishing tool combo included quick nail knot tool, hook tier, loop tyer and retractors, meet your more needs.
  • Fishing knot tying tool: tie your lines securely in a matter of moments and don't worry about your knot coming undone, especially tying nail knot fast.
  • Hook tier: brass multi tool, built-in vice tool clamp, great for connecting fishing line to the hookessential knot tool for carp fishing and fly fishing.
  • Loop tyer: simple plastic tool for quickly tying loop knots for hair rigs or hook lengths, it can also be used as a hook remover for degorging hooks.
  • Carabiner style zinger with gun-black zinc alloy frame, retractable 24"/ 60CM nylon tether and quick release hook.
Check Stock