Categories

Best Receiver With Remote

Replacement for Harbor Breeze FAN35T Remote and Wall Mount for Harbor Breeze Ceiling Fans - FAN-35T, FCC ID: L3HFAN35T1

  • ♥This is not a universal remote control for the ceiling fan. As long as the fan has the receiver in it this remote will work with your harbor breeze ceiling fans,Just remember to set the 4 dip switches inside the battery compartment(they are kinda hidden behind the slot for the battery itself)..
  • ♥This transmitter is to be purchased only to replace the remote your fan was originally installed with. You cannot simply add this unit to any fan that does not already have a receiver pre-installed..
  • ♥Look inside the old remote with the battery cover off. There is a series of "DIP" switches (4). with a pen, slide the switches in the new remote to match the same pattern as the old remote. Replace the battery in the new remote and things should work..
  • ♥It is only a transmitter. This package does not include a receiver. If your original transmitter looks different from this product, please purchase a complete kit with a receiver in the store. Note: seasonal changes of forward and reverse cannot be changed with remote..
  • ♥Make sure your original transmitter model is as shown on the details page, otherwise the remote control may not match your receiver. Frequency: 303.9, Small frequency difference can also match..
Check Stock

Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
  • Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple....
Check Stock

WESTEK Outdoor Remote Control Outlet Switch Kit with Wireless Receiver RFK326LC Black

  • Control Outdoor Lights Remotely – This outdoor remote plug with remote allows you to control lighting and electrical appliances from inside your....
  • 80 Foot Range – The convenient wireless remote control outlet sends a radio frequency signal that works around corners and through door and windows.....
  • Remote Controlled Outlet – This remote control power outlet has many useful indoor and outdoor applications, such as controlling outside Christmas....
  • Easy Installation – Plug the light or other electronic device into the receiver and plug the receiver into the wall socket. Operate the appliances....
  • Weatherproof Receiver – The receiver is weatherproof and rain tight and must be mounted in a vertical position with the sockets facing downwards,....
Check Stock

Logisys RM02 12V 15AMP Relay Kit with Two Remote Controls

  • 12V 15 AMP Relay with Two Remote Controls General Features:.
  • Remote on and off control 12 Volt DC devices such as computer accessories, auto lighting kits, or ot.
  • Easy to wire with basic electrical wiring knowledge Comes with two remote controls Receiver Features.
  • Receiver Input Voltage: 12 VDC Receiver Output Voltage: 12 VDC.
Check Stock

FAN28R Ceiling Fan Remote Control Receiver 240w, Replacement for Hampton Bay Harbor Breeze, Replace 28R FAN18R 18R, Works w/FAN-53T FAN-11T KUJCE9103 Fan-HD FAN-35T1 UC7030T (Receiver Only)

  • 【 Only Receiver 】 This item is only a FAN28R(5+5 μF) 240w receiver (4 code DIP switches) for ceiling fan remote control, the remote/transmitter and 9V battery are NOT included. This receiver compatible with 110V 3-speed AC ceiling fans including Harbor Breeze Hampton Bay Hunter etc. Replacement for FAN-28R FAN18R..
  • 【 Ceiling Fan & Light Remote Control 】 This receiver designed to separately control the ceiling fan speed(HI, MED, LOW, OFF) and light brightness(ON,OFF,DIMMING), it to work with ceiling fan that requires a remote control. Compatible with remote models: FAN-53T FAN-11T Fan-HD FAN-35T1 FAN-35T HD5 UC7030T KUJCE9103 L3HFAN51T FAN-51T RR7079T..
  • 【 Light Dimming 】 Light dimmer of this 28R receiver compatible with incandescent light bulbs and some dimmable LED lamps. Most LED lights and all CFL lamps are non-dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function..
  • 【 NOTICE 】 Please make sure your remote matches this receiver before buying. If not sure, we recommend to purchase a complete kit in our store. Please check the s....
Check Stock

QWinOut 8CH Receiver PWM to PPM Sbus Dbus S-Bus Encoder Signal Converter Module Compatible for DJI Phantom 2 Xaircraft Minix Superx V2

  • Effective Picture Only, Product Do Not Include The Receiver!.
  • With This Signal Converter, You Can Be in Average ELF With Ordinary Remote Receiver and Remote Control, and Don't Have to Use Average of Original Remote Control.
  • With This Signal Converter, You Can Put The Average ELF Remote Control Used in The Ordinary Plane (ELF SBUS For The Remote Control Receiver Signal is Converted Into Common PWM Signal Available To Ordinary Electric Harmonic Steering Gear).
  • With This Signal Converter, You Can Put The Ordinary Ppm Signal Of The Remote Control Interface (Coach) Into PMW Signal (The Equivalent of a Cable Receiver, Converted To Ordinary PWM Signal Available to Ordinary Electric Harmonic Steering Gear).
  • Compatibility:  compatible for DJI S.Bus Flight Control and Gimbal, Xaircraft Minix or Superx V2.
Check Stock

Xbox One IR Extender Emitter Blaster Cable (4 Head, 10 Foot)

  • Hidden Infrared Repeater System comes with 1 Receiver, 4 Emitters as well as an Adapter for power supply. You can control up to 4 different devices or A/V components such as cable box, Blu ray/DVD player, amplifer and etc even they are placed inside of your cabinet with door closed and even behind the wall..
  • Receiver comes with LED confirmation indicator, picks up signal sending from remote control. You should place the receiver pointing straight to where you use remote control..
  • Emitter sends signal from your remote control to other devices placed behind the door or wall..
  • The receiver cable comes with a USB plug and the package comes with a 5V adapter. You may either take power from devices with USB port or directly from power point with the use of 5V adapter..
  • Compatible with all devices within 34 to 60 kHz. Extra Long cable: 6 Feet for Receiver Cable and 9 Feet for Emitter Cable.
Check Stock

2 Pack Universal Ceiling Fan Remote Control Kits, Wireless Remote and Receiver Kits for Harbor Breeze Hunter Honeywell Hampton Bay Kichler Ceiling Fan lights, Fan Speeds Lamp ON/OFF and Timing Control

  • ...an remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light..
  • RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs..
  • Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE..
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

MAISOIE Dog Training Collar, Dog Shock Collar with Remote Range 1300ft, 3 Training Modes, Beep, Vibration, Shock, IPX7 Waterproof Rechargeable Electric Shock Collar for Small Medium Large Dogs

  • ...collar provides 3 training modes: beep, vibration(0-99 levels), and shock(0-99 levels). And you can rotate the intensity dial to adjust the level of vibration or shock quickly. It helps you to teach dog obedience commands and solve barking, biting, chasing, jumping, digging, and other dog behavior problems. And the receiver will auto-stop if the beep/vibration/shock mode works continuously for more than 10 seconds, very safe and humane..
  • 【Detachable Metal Probes】This shock collar comes with two pairs of metal probes in different sizes, long metal probes for long-haired dogs and short metal probes for short-haired dogs. You can choose the most suitable pair according to the thickness of your dog’s hair. Note: The metal probes are detachable. If you don’t need the shock function, you can remove the metal probes to reduce the friction on the dog’s neck..
  • 【Triple Safety Settings】You can turn off the remote to save energy and prevent any misoperation, lock the shock mode to avoid accidental shock, or set the vibration and shock levels to zero to avoid accidental vibration or shock. This dog shock collar can control two receivers at once, so you can train two dogs at the same time. And you can hang the remote on your hand with the lanyard or in....
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

53T Ceiling Fan Remote Control Replacement for Harbor Breeze Hampton Bay Hunter, Replace 2AAZPFAN53T FAN-53T L3HFAN11T FAN-11T L3HFAN35T1 FAN-35T KUJCE9103 CHQ8BT7030T CHQ7030T UC7030T

  • ⚠️ NOTE: original remote must read FCCID: L3HFAN35T1 or L3HFAN35T on the back or this remote will not be compatible..
  • INCLUDES REMOTE AND WALL MOUNT BRACKET ONLY - Receiver Sold Separately (receiver is required for remote to work). If you may need a universal receiver that works with this remote please use part number: UC7067FMRX (Anderic).
  • WARNING: Does not work for LEARNING. Will only work to replace your original, if your original has the DIP-Switches inside battery compartment.
  • Compatible with FAN30R, FAN-30R receiver, UC7067FMRX receiver..
  • Requires: 12V "A23" battery - NOT INCLUDED.
Check Stock

HKZOOI Dog Training Collar, Waterproof Shock Collars for Dog with Remote Range 1640 ft, 3 Training Modes, Beep, Vibration and Shock, Electric Dog Collar for Small Medium Large Dogs

  • ...has a 1+2 channel design and memory function for settings, which means you can train 2 dogs at the same time without resetting it. Great for helping correct dog barking, walking, leash training, sitting, aggression, peeing, and other bad behaviors..
  • 【Safe Silicone Cover and Safety Settings】: Our dog shock collar receiver is safe to use since it comes with non-removable silicone protective covers, it would not hurt your dog’s skin when training. In addition, there are anti-accidental shock settings, when you want to switch beep or vibration mode to shock mode, you need to double click the shock mode, then the shock function work. Note: The shock collar for dogs should not be worn longer than 12 hours per day..
  • 【Long Remote Range and Battery Life】: This dog shock collar with remote range of up to 1640ft (550 yards) in barrier-free area, 1000 ft (330 yards) in barrier area, you can train your dog easily both indoors and outdoors. Both receiver and remote are rechargeable, it takes 2-3 hours to be fully charged. The receiver's battery can last for up to 15 days in standby time and 7-10 days in working time, and the remote can last for up to 90 days in standby time and 25 days in working time..
  • 【Adjustable Collar & IPX7 Waterproof Receiver】: Th....
Check Stock