ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid
- Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident.
- The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red.
- Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance).
- Only takes seconds to know the results,very easy to use.
- CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included).
Check StockRealiNice V Brake Noodle Cable Guide Pipe with Boot Set (2 Pairs)
- 【PERFECT FIT】Fully compatible with Shimano and Avid V Brake system..
- 【DURABLE MATERIAL】stainless steel noodle, rubber boot, alloy cable end cap.
- 【IMPROVED PARTS】Plastic catheter with lube, reduce brake cable friction, enhance braking performance..
- 【FULL PROTECTION】Cable end cap prevent the splitting of the end of the cable core..
- 【2 PAIRS SET】Including brake noodle x4, rubber boot x4, cable end cap x4.
Check StockDorman Help! 13962 Brake Bleeder Caps
- Universal Fitment: Please check the SIZE before Purchase(you can find the size on the picture).. Fits most of 7mm-8mm bleed screw applications on cars and motorcycles. Please check the size of bleed screw when you buy our brake bleed dust cap. Thanks..
- Length: 32.7mm / 1.28inch Size: 32.7*7*10mm.
- Mutiple Function: Brake bleeder screw caps can protect the Bleed Screws, and make the Dirt and Dust out of Bleed Screws..
- Material: Brake Bleed rubber Caps is made of high quality rubber..
- Premium Quality: 100% brand new rubber brake bleed cap and easy Installation.
Check StockGenuine Toyota 2021 4Runner TRD PRO Matte Black Wheels (Set of 4) Fits: 4Runner FJ Cruiser Tacoma
- New Factory Wheel For The 2021 4Runner TRD PRO. Sale Includes Center Cap Part# PT280-89210-F2..
- FITS: 1999 & Newer 4RUNNER 2007 thru 2014 FJ CRUISER 2005& Newer TACOMA.
- Off-road race-inspired 17-in. x 7-in. cast aluminum wheel with 6X139.7MM lug nut pattern.
- Matte black with red TRD logo on center cap. Incorporates the proper weight, offset and brake clearance to ensure proper fit, finish and reliability.
- Extensive ride, handling and strength tests ensure wheels meet TRD's high-quality standards. Recommended TIRE SIZE 265/70R17..
Check Stock
Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line
- What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
- Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
- V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
- Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
- Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check StockJSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)
- Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
- Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
- Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
- Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
- Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check Stock
4 Pieces Brake Cable Universal Bike Inner Brake Cable Housing Kit Bicycle Brake Cable Replacement for Mountain and Road Bike Gear Kit (Black)
- Brake cable set: come with a set of brake cable kit, you get 4 pieces inner brake cables, that enough replace for your old one in long life.
- These set are compatible to mountain bike and road bike universal.
- Brake cable size: the cable housing is 2.5 m in length and 5 mm in thickness, the front brake cable is 1.1 m in length, the rear brake cable is 1.7 m in length, coming with cable collar, cable end and O-ring.
- The brake cable housing kit is wear-resistant and durable, help provide safety to the cyclist.
- Quality material: the brake housing is made with strong PVC coat coming with stainless steel cable, which improves the smoothness of the brake housing, so it is smooth and resistant.
- It can sustain high cable tension forces without splitting, helping to stop your bike instantly.
- The shell is made of PVC material, with resistance to cold, heat and oxidation, not easy to deform, ensure the brake sensitive, suitable for most kinds of weather conditions of riding.
- Applicable scope: bike housing and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance and upgrading of cables.
- Note: please cutting off no need ended and wear tail-end cap, prevent to hurt yourself.
- You will get: the housing replacement ....
Check StockUTSAUTO Brake Bleeder Screw Caps Grease Dust Cover Brake Bleed Nipple Cap for Cars and Motorcycle 30 Packs
- Universal Fitment: Fits most of 6mm-8mm bleed screw applications on cars and motorcycles. Please check the size of bleed screw when you buy our brake bleed dust cap..
- Mutiple Function: It can protect the Bleed Screws, and make the Dirt and Dust out of Bleed Screws..
- Material: Brake Bleed rubber Caps is made of high quality rubber..
- Premium Quality: 100% brand new rubber brake bleed cap and easy Installation.
- Package inlcude 30pcs Brake Bleeder Screw Caps.
Check Stock
Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome
- ...orward Controls, Chrome. *Not compatible with most engine guards or with stock exhaust on '08-'16 FXDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
- Parts Included: (1) Shift Assembly, Standard Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
- Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFS....
Check Stock
2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS
- Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
- Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
- *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock
Swpeet 14Pcs Bike Brakes Sets, Including 2 Pairs V-Type Brakes, Universal Bike Front and Rear Brake Cable, Cable End Caps, Rubber Boot, V Brake Noodle Bend Pipe for Most Mountain Bike
- 【 What You Get】 ------ In this kit, You will get 14Pcs Complete Bike Brake Set, Including 1Pcs V Brake Noodle 90 Degree Bend Pipe.
- 1Pcs V Brake Noodle 110 Degree Bend Pipe.
- 1Pcs Rear Brake Cable. Intotal 14Pcs can meet all your bicycle installation needs..
- 【 2 Pairs Mountain V Bike Brakes】 -------- Which can fit most of bicycles mountain bikes, Durable aluminium alloy and plastic and rubber for the bike brake set, they are very strong and with resistance to cold, heat and oxidation. and it is not easy to out of the shape. A fairly decent replacement brake system. Parts are well made and work well. The adjustment screw for the brake springback makes it easy to adjust..
- 【 4Pcs Cable End Caps】 -------- The end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
- Put the cap through the cable and clamp the cap to fix it firmly to the cable.
- 【 High Quality】 -------- The brake housing set is made of alloy and plastic, strong and durable enough for long time use, with resistance to cold, heat and oxidation, not easy to deform, ensuring the brake sensitive, suita....
Check Stock
TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017
- ...orward Controls, Chrome. *Not compatible with most engine guards or with stock exhaust on '08-'16 FXDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
- Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
- Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFS....
Check Stock
Riakrum 2 Sets Bike Brakes Include 2 Pairs V-type Brakes with 2 Pieces Braking Cables and 4 Pieces Cable End Caps for Mountain Bikes
- Complete bike braking kit: you will get 2 pairs of V type brakes, 2 pieces of braking cables and 4 pieces of cable end caps in total.
- This is a complete set of mountain bike brake equipment.
- Size information: the brake arm is 110 mm/ 4.3 inches.
- The front and rear brake cables are 27.5 inches and 68.9 inches respectively.
- They are suitable for most V-type brakes bike.
- Quality materials: the brake arm is made of aluminum alloy, which is solid and not easy to break.
- The brake pad is made of hard-wearing rubber, which is heat resistant and not easy to deform, providing great braking power on bike rim in both dry and wet conditions.
- The brake cable is also made of quality aluminum alloy and covered with black PU leather pipe, which makes the cable more strong and durable.
- Cable end caps: the end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
- Put the cap through the cable and clamp the cap to fix it firmly to the cable.
- Stop smoothly with less noise: the grooves of the brake pads can effectively prevent sand or stone damage the wheel rims.
- The slightly curved design can provide better braking power and reduce stopping distance....
Check Stock
