Categories

Best Red Zinc Screws

Drywall Screws: Yellow ZINC #8 x 3\ (12.5 Ounces  ~71 Screws) COARSE Thread Drywall Screws (sheetrock Screws) for Gypsum Board, sheetrock, plasterboard. Low Cost, All Purpose Wood Screws

  • Yellow Zinc Coarse Thread Drywall Screws designed for drywall, gypsum board, sheetrock, plasterboard.
  • Drywall Screws AKA sheetrock Screws, plasterboard Screws, Multipurpose Phillips head wood Screws.
  • Drywall Screws can be used as all purpose Screws or wood Screws: good for medium duty wood screw use.
  • If used as an all purpose wood screw, use for interior application.  Yellow zinc screw coating..
  • Drywall Screws are a great low cost solution to everyday, non-structural wood screw applications.
Check Stock

Drywall Screws: Yellow ZINC #6 x 1-1/4\ (12.5 Ounces ~215 Screws) COARSE Thread Drywall Screws (sheetrock Screws) for Gypsum Board, sheetrock, plasterboard. Low Cost, All Purpose Wood Screws

  • Yellow Zinc Coarse Thread Drywall Screws designed for drywall, gypsum board, sheetrock, plasterboard.
  • Drywall Screws AKA sheetrock Screws, plasterboard Screws, Multipurpose Phillips head wood Screws.
  • Drywall Screws can be used as all purpose Screws or wood Screws: good for medium duty wood screw use.
  • If used as an all purpose wood screw, use for interior application.  Yellow zinc screw coating..
  • Drywall Screws are a great low cost solution to everyday, non-structural wood screw applications.
Check Stock

Drywall Screws Yellow ZINC #6 x 1-5/8 Bulk 5,000 Screws COARSE Thread Drywall Screws sheetrock Screws for Gypsum Board sheetrock plasterboard Use for Low Cost All Purpose Wood Screws

  • Yellow Zinc Coarse Thread Drywall Screws designed for drywall, gypsum board, sheetrock, plasterboard.
  • Drywall Screws AKA sheetrock Screws, plasterboard Screws, Multipurpose Phillips head wood Screws.
  • Drywall Screws can be used as all purpose Screws or wood Screws: good for medium duty wood screw use.
  • If used as an all purpose wood screw, use for interior application.  Yellow zinc screw coating..
  • Drywall Screws are a great low cost solution to everyday, non-structural wood screw applications.
Check Stock

WELLOCKS Wood Screws 265 PCS 304 Stainless Steel M3/M4/M5 Self Tapping Screws Assortment Set, Flat Head Rust Proof Wood Screw Kit with Storage Box for Homemade, Repair, Woodwork Indoor Outdoor (D034)

  • The Ace Screws plates are designed to be used with Ace Screws #15 Fasteners to secure ridged insulation, base sheet, EPDM, TPO, and PVC to steel or wood structural decks..
  • Ace Screws roofing fasteners and plates are approved by many of the major material manufactures to be utilized in full system warranties..
  • Manufactured using AZM technology (Aluminum, Zinc, and Magnesium). After 15-cycle Din 50018, Ace Plates showed less than 1% red rust, with 15% being acceptable.
  • Ace Plates go through continuous Quality Assurance testing by third party companys..
Check Stock

Hilitchi 160-Pieces Large/Small Zinc Plastic Self Drilling Drywall Hollow-Wall Anchor Assortment Kit

  • High-quality Zinc / Plastic Self-Drilling Anchor Kit, Constructed From Durable Plastic and Zinc for Maximum Durability, Can Be Easily Removed..
  • Applicable to 3/8", 1/2" or 5/8" Gypsum Wallboard, No Pre-Drilling Needed, Anchors can be Removed..
  • Starts Easier Than Other Drywall Anchors, Drills Directly Into Drywall Even If You Hit a Wood Stud..
  • Kit Includes 20pcs Large 20pcs Small Zinc / Plastic Anchors and 40pcs #81'' Screws, 40pcs #81-1 / 4'' Phillips Screws and a Plastic Case..
  • Package Quantity: 160pcs (80-Pairs), Material: Plastic, Zinc, Stainless Steel (Is not an ordinary iron screw)..
Check Stock

K Kwokker 651Pcs #8-32#6-32#2-1/2 Machine Screw Phillips Pan Head Set Screws Assorted Nuts and Bolts and Washers, Cabinet Door and Drawer Screws

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2″, 25pcs 8-32*3/4″, 25pcs 8-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2″, 25pcs 6-32*3/4″, 25pcs 6-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To ....
Check Stock

LJTsheng for TRD PRO Front Grille Insert Emblem Badge 5 9/16 INCH,3D Grille Decoration Nameplate Decal,Fit for Tacoma Tundra 4runner Pack of 1 Red

  • Package Include: One Piece of Red TRD PRO grill Badge with Installation Screws.(As Pictured in the left).
  • Material: High Quality ABS for PRO badge.
  • Zinc Alloy for Screws. Badge Size: 140mm*35mm.
  • 5-Minutes Easy Installation: Screw into your grill, clamp the grille in between the front & back piece..
  • Wide Application: Can be Used on the grille for Toyota trucks.Compatible with Tacoma 4Runner Tundra Sequoia Rav4 Highlander etc..
  • If You Like it, Do not Hesitate Buying. We Offer 24 Hours Online Services, Any Questions Please Contact US without Hesitation..
Check Stock

Hidden Truth

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

UniqueFire Black 3MOA Tactical Compact Holographic Reflex Mini Micro RMR Red Dot Sight Scope

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Diamond Point Screw Concrete Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock