Categories

Best Reduced Burrs

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

  • ... and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off..
  • 【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
  • 【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
  • 【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

Capresso Infinity Conical Burr Grinder, Black 8.8 oz

  • PRECISION GRINDING: Commercial-grade, solid steel conical burrs with advanced cutting design.
  • WIDE GRINDING RANGE: From ultrafine Turkish to French Press coarse and everything in between.
  • PRESERVES AROMA: Gear reduction motor grinds slow with reduced noise and little static build-up.
  • LARGE CAPACITY: 8.8 ounce bean container and 4 ounce ground coffee container.Watts/Volts/Hertz: 100W/120V/60Hz.
  • EASY TO CLEAN: Removable upper burr allows access for easy cleaning.
Check Stock

Bosch DCB530 5-3/8\ 30 Tooth Edge Circular Saw Blade for Ferrous Metal Cutting

  • Brute Carbide – an extra-hard C6 micrograin carbide formulation that increases impact resistance.
  • Half Bevel Grind (HBG) Tooth Geometry – designed for a high quality of finishing in highly abrasive materials.
  • SpeedCoat – an antifriction finish that delivers cooler running and less dust than bonded abrasive wheels.
  • Reduced hook angle – produces fast, clean cuts with minimum burrs.
  • Extra-hard steel blade body – delivers accuracy and resists bending and deflection for true cuts.
Check Stock

Tenryu RS-25524CBN 10\ Carbide Tipped Saw Blade ( 24 Tooth ATB Grind - 5/8\ Arbor - 0.126 Kerf)

  • Rugged plates and specially formulated carbide tips with a special tooth grind for fast, clean cuts.
  • High quality cuts without the clouds of dust and scorch marks associated with friction blades.
  • Cool cuts that leave the work piece edge free of burrs.
  • Reduced cost-per-cut and maximized performance for the operator as a result of fewer blade changes.
  • Applications: For ferrous metal cutting. General Application..
Check Stock

Klein Tools 53725 BX Cable Cutter and Armored Cable Cutter, Cut Flexible Conduit and Armored Cables, with Storage for Extra Blades

  • Cable Cutter easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle.
  • Depth of cut adjusts between standard MC and reduced diameter MC to prevent cable nicks.
  • Comes with one blade stored in handle for convenience.
  • Holds up to six replacement blades in handle.
  • Use with Klein Tools replacement blade Cat. No. 53726SEN.
Check Stock

WHISTECK Carbide Burrs Set 10 Pcs Double Cut Solid Tungsten Carbide Rotary Burr Set 1/4 Inch Shank Die Grinder Bits Rotary File for Die Grinder Metal Carving Polishing Engraving Drilling

  • ...r finish due to producing smaller chips. End cut design for variety interior contour work and face milling. High-strength and ultra-sharp cutting teeth offers better operator control & rapid stock removal in harder materials, save working time and maximize your productivity. You get less operator fatigue due to reduced pull, accurate faster penetration and gratifying results..
  • 【WIDELY APPLICATION NEED】: Whether You’re a First-timer, Apprentice or Professional, advanced design and quality inherent in every standard of our carbide burrscan achieve great performance with high accuracy and high efficiency. WHISTECK’s rotary files quality built & rugged enough to meet or surpass the industry’s highest standards for tool design, performance, durability & suitability for the designated applications..
  • 【EXQUISITE TOOLBOX PACKAGE】: This 10-piece carbide rotary burrs with 1/4 inch shank will meet everything you need for cutting, welding, chamferring, deburring, casting, sculpting, shaping, grinding, polishing. A great storage box for easy transportation and safe keeping! No more misplacing or losing your die grinder attachments, keep them accessible and within immediate reach every time you need them!.
Check Stock

Capresso 560.04 Infinity Conical Burr Grinder, Brushed Silver

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

Capresso 565.05 Infinity Conical Burr Grinder, Stainless Steel

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

Capresso 124.01 Ultima Pro Programmable Pump Espresso Machine & Infinity Conical Burr Grinder, Black

  • Product 1: FAST AND CONSISTENT: 15 bar pump stainless-steel lined Thermoblock provides the ultimate crema.
  • Product 1: SELF-TAMPING: Portafilter will automatically tamp the espresso with minimal effort.
  • Product 1: PROGRAMMABLE: Press and hold programming for single or double cup buttons.1450W.
  • Product 1: REMOVABLE WATER TANK: Convenient filling with 34 ounce removable water tank.
  • Product 2: PRECISION GRINDING: Commercial-grade, solid steel conical burrs with advanced cutting design.
  • Product 2: WIDE GRINDING RANGE: From ultrafine Turkish to French Press coarse and everything in between.
  • Product 2: PRESERVES AROMA: Gear reduction motor grinds slow with reduced noise and little static build-up.
  • Product 2: LARGE CAPACITY: 8.8 ounce bean container and 4 ounce ground coffee container.Watts/Volts/Hertz: 100W/120V/60Hz.
Check Stock

Sanding Belt Non Woven 2' X 72' Very Fine (Blue) 2-Pack Surface Conditioning Belt for Knife Making, Welding & General Metal Fabrication

  • This is a 2 pack of 2" wide by 72" long very fine surface conditioning belts that leave a 180 - 240 grit finish..
  • Surface Conditioning belts work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives..
  • Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results.
  • Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges.
  • Removes surface imperfections, grindlines, mill, and other marks. Non-woven, surface conditioning belts clean, blend, deburr and finish.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

Capresso 560.01 Infinity Conical Burr, Black (Renewed)

  • Commercial-grade solid conical steel burrs with advanced cutting design for high precision grinding.
  • Extremely wide grinding range from ultrafine Turkish to coarse for all kinds of coffee preparation. The settings are marked into four categories: extra fine, fine, regular and coarse..
  • Tight-fitting ground coffee container holds up to 4 oz of ground coffee.Safety lock system for safe operation during and after use.
  • auto off when bean container is not locked.Timer can be set to grind from 5 to 60 seconds.
  • See-through bean container holds up to 8.8 oz of beans.
  • Gear reduction motor grinds slow with reduced noise and little static build-up. Dimensions: H-10.5 x W-7.75 x L-5 inches.
  • Slowest grinding speed in its class creates less friction and heat buildup preserving maximum aroma and flavor for all grind settings.
  • Please note :All units are new and tested with actual coffee beans prior to leaving the factory. The grinder is thoroughly cleaned before it’s packed, however it may contain a small amount of coffee residue.
Check Stock

LANTRO JS - D26 Ball Crank Table Handle, Milling Machine 3 Ball Crank Handle, Replace Handle for Bridgeport Milling Mill, 16mm Inner Hole Diameter

  • △Parameters: Whole Length: Approx. 197mm / 7.8in.
  • Inner Hole Diameter: Approx. 16mm / 0.6in.
  • △Premuim Quality: The crank handle is made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock