Categories

Best Reduced Shank Adapter

IRWIN Drill Bit Set, General Purpose, 3/8-Inch Reduced Shank, 29-Piece (60148)

  • These drill bits are constructed of M-2 high-speed steel for strength, as well as heat and wear resistance.
  • Each drill bit has a standard 118° point for use in metal, wood and plastic.
  • 3/8-inch reduced shank fits most 3/8-inch drills.
  • These IRWIN drill bits come in a metal index case.
  • Includes 1/16″ through 1/2″ drill bits in 1/64″ increments.
Check Stock

CURT 45048 Trailer Hitch Receiver Adapter Reducer, 2-1/2 to 2-Inch, 34-In Extension, 4,500 lbs , Black

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 34 inches of extra length to your hitch receiver. It can also be trimmed to as little as 24 inches.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch trailer hitch receiver. It accepts an industry-standard 2-inch shank. It is equipped with built-in safety chain loops.
  • SOLID STRENGTH. This hitch receiver adapter is rated for 4,500 lbs. GTW and 450 lbs. TW (6,000 / 600 lbs. at 24 inches). It can also be used with a weight distribution hitch for 6,000 lbs. WD and 600 lbs. WDTW (8,000 / 800 lbs. at 24 inches).
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

  • ...ction head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
  • ☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
  • ☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • ☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..
Check Stock

Drill America 33 Piece m35 Cobalt Reduced Shank Drill Bit Set (1/2″ – 1″ x 64ths), DWDCO Series

  • 33 Piece Set with 1/2″ Reduced Shank Drill Bits.
  • Effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium.
  • Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • 135 degree split point tip for self-centering and reducing thrust.
  • Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel.
  • Sizes include: 1/2″, 33/64″, 17/32″, 35/64″, 9/16″, 37/64″, 19/32″, 39/64″, 5/8″, 41/64″, 21/32″, 43/64″, 11/16″, 45/64″, 23/32″, 47/64″, 3/4″, 49/64″, 25/32″, 51/64″, 13/16″, 53/64″, 27/32″, 55/64″, 7/8″, 57/64″, 29/32″, 59/64″, 15/16″, 61/64″, 31/32″, 63/64″ and 1″..
Check Stock

IVY Classic 10332 1/2 x 12-Inch Premium Carbide Masonry Drill Bit, 3/8-Inch Reduced Shank, 1/Card

  • Round shank designed for rotary and percussion hammer drilling through block, brick, stone, concrete and marble, Swift Cut (Registered Trademark).
  • Tungsten Carbide reinforced head – precision ground.
  • Induction-hardened body ensures straightness and strength, sandblasted finish.
  • Engineered with wide flutes for fast dust removal.
  • Diameter: 1/2-inch, Overall Length: 12-inch, Shank: 3/8-inch Reduced Shank, Flute Length: 6-3/4-Inch.
Check Stock

BOSCH SF2561 2-9/16 In. Self-Feed Drill Bit

  • 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank).
  • Chip lifters and spurs can be re-sharpened to maximize bit life.
  • Deep cutter gullets prevent stalling and provide smoother drilling.
  • Replaceable threaded tip and hex key included.
Check Stock

BOSCH SF3001 3 In. Self-Feed Drill Bit

  • 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank).
  • Chip lifters and spurs can be re-sharpened to maximize bit life.
  • Deep cutter gullets prevent stalling and provide smoother drilling.
  • Replaceable threaded tip and hex key included.
Check Stock

COMOWARE 29-Piece Drill Bit Set, High-Speed Steel Black and Gold Finish with 135 Degree Split Point Tip, 1/16' to 1/2' x 64ths Increments

  • Versatile general-purpose drill bit set,High-speed steel (HSS) and gold oxide finish resists corrosion and increases the hardness of the drill bit..
  • Assortment of 29 jobber length drill bits (1/16" to 1/2" in 1/64" increments)..
  • Shanks fit standard three-jaw drills,and use in drilling wood,plastic and Light-gauge metal..
  • Three unique shank styles keep bits securely seated to save you time and frustration. 1/16"-11/64" is round shank, 3/16"-3/8" is three flatted shank, 25/64"-1/2" is 3/8" reduced shank and three flatted shank..
  • ORGANIZED HOLDER- Set includes the drill bit holder with size index for easy storage and organizing..
Check Stock

uxcell Reduced Shank Drill Bit 21.5mm High Speed Steel HSS 4241 with 1/2 Inch Straight Shank

  • High Speed Steel tool - 21.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance..
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes..
  • Polished Finish - Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge..
  • Wide Application - Drill low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing. (Hardness of the material to be drilled should not exceed 29HRC.).
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals, and the feed speed should be controlled. Increased use of water lubrication will extend drill bit life..
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

Megadream Xbox One Wireless Chatpad Keyboard with 3.5mm Audio Jack for Xbox One/One S/One X, Xbox Series S/X, Xbox One Elite/Elite 2, PC – 2.4G USB Receiver & Charge Cable included

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-inch receiver and accepts a 1-1/4-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 4 inches of extra length to your hitch receiver. This provides additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver. It also accepts any industry-standard 1-1/4-inch x 1-1/4-inch shank.
  • SOLID STRENGTH. This hitch receiver adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

Viking Drill and Tool 29201 Type 280-D Reduced Shank Cobalt Drill Bit, 5/8″

  • M42 Cobalt 1/2-inch Reduced Shank Silver and Deming 135-Degree Split Point.
  • 135-Degree split point for accurate centering and fast penetration.
  • Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.
Check Stock