Categories

Best Refractory Firebrick

DEVIL-FORGE Gas Propane Forge DFPROF3+2D, 3 Burners DFP (240.000 BTU) use 1, 2 or 3, Gas Ball Valve, 2 Doors, Knife Making, Blacksmith, Farrier, 2500°F / 1370°C

  • INTERIOR DIMENSIONS (WxHxD): 5.8” x 5.8” x 24” (145mm x 145mm x 600mm). WEIGHT: 32lb / 15kg. TEMPERATURE: 2500°F / 1370°C.
  • INSULATION: the interior of the forge is fully lined with 1” of the ceramic blanket. The forge bottom is made of firebrick, providing superior strength and durability.
  • FITTING: POL CGA-510. Our unit is ready to use in the U.S.A. Works with a standard propane tank.
  • THE FORGE BODY IS MADE OF: steel 16 gauge (1.5mm). GAS PRESSURE REGULATOR, gauge with Mpa monometer. Pressure Range 0-0.6Mpa (0.1Mpa - 1Bar - 14.5PSI).
  • PACKAGE INCLUDES: Gas Propane Forge Model: DFPROF3+2D with 2 doors, 3 connected DFP burners, Tongs, Firebrick, 2 Door handles, Gas pressure regulator with manometer, 6.5ft / 2m gas hose, 2 Clamps, Refractory rigidizer powder, Brush, User manual, Heat Resistant Gloves (the appearance of the gloves may vary).
Check Stock

Simond Store Ceramic Fiber Insulation Board (2300 F) (1\ X 18\ X 24\), Ceramic Thermal Insulation Board for Wood Stoves Fireplaces Furnaces Forges Kiln Pizza Oven - Pack of 1

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

Tenon Refractory Mortar - Mortar for Temperatures up to 2,550°F (10 lb, 1)

  • READY TO USE: Preblended, just add water and go!.
  • INDOOR OR OUTDOOR: Ideal for fireplaces, inside of fire pit rings, barbeques, pizza ovens, and chimney applications such as setting clay flue liners, parging a smoke chimney chamber.
  • BUILT FOR HIGH TEMPERATURES: Made to resist 2,550°F (1400°C) for a minimum of 6 hours without melting out of the joints of a firebrick and refractory mortar assembly.
  • EFFICENT WORKING TIME: Provides 1 hour of working time prior to hardening.
  • HIGH STRENGTH: Once cured, becomes water insoluble and acid resistant.
Check Stock

28LB/12.8KG Propane Furnace Deluxe Kit with Crucible and Tongs Smelting Gold Silver Copper Scrap Metal 2700°F/1482°C Kiln Melting Casting Refining Forge Set

  • ...d much faster than those of the electrically heated melting furnace. The temperature will rise quickly to reduce your waiting time..
  • Superior Quality – The propane melting furnace is made from heavy duty steel and its burner nozzle is made from SS-304 material. Its heating zone is fully insulated with 1 inch thick Refractory Ceramic Fiber, and its cover is insulated with 2-3 inch Refractory Ceramic Fiber, which can resist temperature up to 2700°F (1482°C). A rigid Block of Refractory Fire Brick placed at bottom of the furnace will be a smooth and plain surface to hold the crucible without any inclination..
  • Satisfaction Guarantee – If you're not satisfied with this kit, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service..
Check Stock

Mr Volcano Hero - Portable Propane Forge (Complete Kit - Now with Superwool XTRA) MADE IN USA (Stainless Steel) Single Burner Professional Artists Hobby Knife Making Tool Making Farrier Blacksmith

  • Built in the USA. Complete Propane Forge Kit – heats up to 2600°F.
  • Stainless Steel Construction | Size: 9.5 x 8.75 x 8.75.
  • KIT INCLUDES: 1″ 8# High Density Superwool XTRA Low Biopersistent Fiber Blanket (New Improved Safer!).
  • 8oz Rigidizer Concentrate | 2lb Satanite Refractory Mortar for Initial Coating and 8oz for future Maintenance.
  • Extreme Heat Magma Firebrick | 6ft Propane Hose with Regulator | Instruction and Operating Manual.
Check Stock

PIILOO Portable Propane Forge Single Burner Furnace for Blacksmith Tong Knife Farrier Tool Forging Making Large Capacity

  • Structure--Internal large capacity (7.5"x10"x6.3") with oval design, provide the largest working space, suitable for various small forging works. Full size thick refractory bricks (4.5" x 9" x 1.25"), placed at the bottom of the forging furnace, serves as a solid base for the metal stock..
  • Rapid Heating--High efficient single forge burner can easily heat metal stocks to 2300+ °F / 1260+ °C. Oval-shaped forging wall can help heat the workpiece uniformly, improve efficiency and save your time..
  • Easy-Regulation--Equipped with gas pressure regulator with a rating of 0-20 PSIG, can provide excellent neutral flame and easily adjust the flame temperature. 55.9 inch hose pipe can keep the gas tank away from the hot temperature to ensure safety..
  • Superior Heat Insulation--Equipped with 1 inch thick high density ceramic fiber blanket, which can withstand temperature up to 2000+ °F, provides excellent heat insulation performance, reduces fuel consumption and increases propane forge’s service life..
  • Package Includes--1X portable propane forge, 1X burner assembly, 1X ceramic fiber blanket, 1X gas pressure regulator & hose pipe, 1X firebrick..
Check Stock

Rutland Products Black Rutland Fireplace Mortar Cartridge 10.3-Ounce

  • Perfect for repairing small chips or cracked firebrick, re-pointing mortar joints between firebricks, and bonding firebricks together.
  • Sets as hard and as strong as firebrick after curing.
  • Approximate Coverage: 99 feet with 1/8" bead..
Check Stock

Dap 18854 Stove & Fireplace Mortar (Pack of 6)

  • Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
  • A non-combustible silicate cement for applications in wood-frame construction where an ASTM E136 sealant is required..
  • Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
  • Use to tuck point between firebricks and to repair broken firebricks.
Check Stock

US Stove Company FBP6E FireBrick, 6-Pack, Cream, 3 Fl Oz

  • Replacement bricks for firebrick liners on stoves.
  • Dimensions: 4-1/2 inches x 9 inches x 1-1/4 inches.
  • For any brand of wood or coal stove that uses this standard-sized brick.
Check Stock

GIRtech Forge High Density Heavy Duty Fire Brick 3180 F

  • Chamotte High-Density Heavy Duty Firebrick 3180 F°.
  • Are used for masonry and lining, steel-pouring complexes, ladles for melting metals, forges as well as various heating units, including household....
  • Heavy Duty firebrick can be used in any type of domestic and industrial heating units, such as brick fireplaces, steel furnaces, heating stoves,....
  • FULL Bricks (9" x 4.5" x 2.5" inches) 7.8 lb.
Check Stock

10.1 oz Dap 18854 Black Mortar High Heat Pack of 12

  • Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
  • Used for applications in wood frame construction where an ASTM E136 non-combustible sealant.
  • Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
  • Use to tuck point between firebricks and to repair broken firebricks.
  • It has been tested in accordance with ASTM E136 and withstands temperatures up to 2,000° F.
Check Stock

Bon Tool 12-178 Rub Brick - Fluted 6\ X 2\ X 2\ - 20 Grit

  • GIRtech USM – chamotte firebrick has improved thermal conductivity compared to traditional chamotte products..
  • Firebrick can be used in any type of domestic heating units, such as brick fireplaces, steel furnaces, heating stoves, barbecues and barbecue complexes, ceramics kilns and blacksmith forge..
  • It can be used both for arranging the hearth of the furnace and for lining the inner surface of the furnace..
  • Could be cutted or processed with a special tool if necessary..
Check Stock

GIRtech FIRECAST Refractory castable, Cement 3110 F 30 LB

  • Concrete mix GIRtech FIRECAST is designed for molding refractory products by vibro casting, pouring the brickwork lining layer into the forms, and repairing masonry/joints of heating units..
  • Concrete mix GIRtech FIRECAST is a multifunctional refractory product..
  • Designed for molding refractory products by vibro casting (fireplaces or stoves elements), pouring the brickwork lining layer into the forms.
  • Repairing masonry/joints of all kinds of heating units.
Check Stock