Categories

Best Refractory Insulating Material

GIRtech CONTACT-40 Furnace Cement and Fireplace Mortar 30 LB

  • Universal ready-mixed high-refractory mortar based on aluminosilicate natural materials with a high content of aluminum oxide..
  • Ready-mixed mortar is easy in using, has high plasticity and is ready for use after opening the bucket. The optimal composition and proportions are developed by professionals..
  • Recommended for bonding fire-resistant and heat-insulating bricks in masonry, for gluing shaped fireclay products, elements of fireplace inserts, as well as for repair and restoration works of fire-resistant masonry.
  • Mortar is available in matal container 30lb.
  • Mortar is intended for use both in household furnaces, fireplaces, chimney systems, and in forging furnaces and kilns for ceramics.It is non-toxic and can be used indoors..
Check Stock

GIRtech FIRECAST Refractory castable, Cement 3110 F 30 LB

  • Concrete mix GIRtech FIRECAST is designed for molding refractory products by vibro casting, pouring the brickwork lining layer into the forms, and repairing masonry/joints of heating units..
  • Concrete mix GIRtech FIRECAST is a multifunctional refractory product..
  • Designed for molding refractory products by vibro casting (fireplaces or stoves elements), pouring the brickwork lining layer into the forms.
  • Repairing masonry/joints of all kinds of heating units.
Check Stock

Replacement Combustion Chamber Kit Weil-McLain 66 68 68V 386-500-085 1060

  • KIT CONTAINS: Replaces Weil-McLain kit 386-500-085. Kit contains: rear refractory 591-000-060 wet pack, front refractory 591-000-061, floor blanket....
  • FIT: Fits all Weil-McLain 66, 68 (rear flue) & 68V (top flue) water and steam boilers. Fits all 66 series (A,P & B), inlcuding , 266, 366, 466, 566,....
  • SAVE TIME: Kits contain everything needed for the job in one box, saving time and simplifying ordering..
  • CAUTION: Protect this product from freezing to prevent damage to wet refractory..
  • SAFETY: See Important Safety Information below.
Check Stock

28LB/12.8KG Propane Furnace Deluxe Kit with Crucible and Tongs Smelting Gold Silver Copper Scrap Metal 2700°F/1482°C Kiln Melting Casting Refining Forge Set

  • ...d much faster than those of the electrically heated melting furnace. The temperature will rise quickly to reduce your waiting time..
  • Superior Quality – The propane melting furnace is made from heavy duty steel and its burner nozzle is made from SS-304 material. Its heating zone is fully insulated with 1 inch thick Refractory Ceramic Fiber, and its cover is insulated with 2-3 inch Refractory Ceramic Fiber, which can resist temperature up to 2700°F (1482°C). A rigid Block of Refractory Fire Brick placed at bottom of the furnace will be a smooth and plain surface to hold the crucible without any inclination..
  • Satisfaction Guarantee – If you're not satisfied with this kit, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service..
Check Stock

Garland Mfg 31004 Split Head Hammers, 2' Diameter, 14' Handle, Rawhide

  • The split-head hammer does the work of six different hammers because the face can be easily changed.
  • The base hammer has been the leading refractory hammer for decades.
  • Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed.
Check Stock

Garland Mfg 31005 Split Head Hammers, 2 3/4' Diameter, 14' Handle, Rawhide

  • The base hammer has been the leading refractory hammer for decades.
  • The split-head hammer does the work of six different hammers because the face can be easily changed.
  • Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed.
Check Stock

Simond Store Portable Propane Gas Forge Single Burner Knife and Tool Making Blacksmith Farrier Forge with Stand

  • The Burner Nozzle is made from SS-304 material..
  • Heating zone is lined with 1 in. thick ceramic fiber blanket which is coated by Rigidizer, It can resist 2600° Fahrenheit (1425° Celsius Approx.) so we can say that it can reach up to welding temperature and it also reduce fuel consumption too, 1 in. thick refractory fire brick will be placed at the floor to provide superior strength, durability and resist high velocity firing, And all this refractory materials are easy to replace available to buy at our store.
  • Powerful burner gives out a neutral flame by leaving a small amount of oxygen for scaling, burner has High quality nozzle made from SS-304 for increase the efficiency of burner with the help of air chock valve (top of the burner) to create adjustable air flow control to get maximum combustion as you need a different quantity of air on different pressure you can adjust the air chock valve to regulate the specific amount of air to mix with the propane during combustion to reach forging temp..
  • You can check Pressure in manometer to adjust gas pressure from regulator to control gas consumption.
  • We give Complementary Ceramic Blanket Piece to insulate burner pipe (gap between burner and forge) which helps maintain heat inside forge.
Check Stock

Lynn Manufacturing Replacement Combustion Chamber Kit Olsen Airco 28562 88231B1 9200C 1158

  • KIT CONTAINS: Combustion chamber firepot 28562 88231B1 9200C cut in half, stainless steel straps, hardware, spacer, refractory cement and....
  • FIT: All models using OEM part numbers 28562 or 88231B1 or 9200C including model BCL-115/125, BCL-120(S)(ST), 145(S)(ST), BFL-120, BFL-120T, BFL-145....
  • INSTALATION: A caulking gun is required for proper installation. Protect from freezing: This kit contains a sealant that is damaged if frozen..
  • CAUTION: Protect this product from freezing to prevent damage to wet refractory..
Check Stock

menolana 2pcs Insulating FireBrick Fire Brick Jewelry Making Processing Casting Tools

  • The ceramic soldering board is lightweight and reflects heat. Ac-id-resistant, Non-as-bestos, flame-resistant and non-combustible. Best choice for jewelry and other soldering crafts..
  • Unique honeycomb design refractory brick with holes to hold pins which can keep your work in place..
  • Size: 13.6 x 9.7 x 1.2cm / 5.35 x 3.81 x 0.47inch. Weight: Approx. 5.6 oz (158.5 g)..
  • Capable of withstanding temperatures that range up 2000ºF..
  • Refractory welded plate jewelry processing tool. There are airy holes throughout the board, please set it on top of a firebrick to protect your bench when soldering..
Check Stock

Filter,4-1/4' L,2-39/64' x 9/32' Sz,PK10

  • Fits FR-41 Series, FR-301, FR-300, 817, 807, 808, 809, and 472D.
  • The material of the ceramic filters has changed from refractory ceramic fiber to a biosoluble filter.
Check Stock

94% Alumina Dense Castable Refractory Cement 22 Lbs.

  • Max. Service Temperature: 3270 F(1800 C).
Check Stock

Headphones Earbuds Wired Headphones Noise Isolating Earphones Built-in Microphone and Volume Control and Noise Cancellation Compatible with iPhone13/12/11 Pro Max/XS/XR/X/7/10 Plus/iPad/iPod White

  • ♫ [2021 new pop-up headphones] : You need to first open Bluetooth on your phone, then insert the headset into the iPhone, a pop-up window will appear in a few seconds, you need to click “Connect with iCloud”. (The second or later insertion of the phone will automatically connect).
  • ♫ [Perfect Stereo Sound & Noise Reduction Design] : Ergonomic and ultra-lightweight in-ear designed with solid sound-insulating material, reduces external noise while minimizing the sound leakage, giving you clear sound..
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock