Categories

Best Refrigerant Regulators

R134a Refrigerant Recharge Hose Kit-A/C Freon Charging Hose Set, with BPV-31 Bullet Piercing Tap Valve, AC Retrofit Valve, R134a Self Sealing Adapter, for Home/Car A/C Refrigerant System

  • 【R134a Freon Recharge Kit】The ac refrigerant recharge hose kit includes: 1pcs R134a refrigerant charging hose with scale guage readings for R134/R12/R22 types freon, 1pcs RH thread R134a self sealing adapter, 1pcs ac retrofit valve, 1pcs bpv-31 bullet piercing tap valve.
  • 【RH R134a Self Sealing Adapter】The ac refrigerant charging hose can be achieved to connect self sealing refrigerant cans through this RH thread r134a self sealing can tap.
  • 【R134a Refrigerant Charge Hose with Guage】The ac freon charging hose equiped with the scale guage reading for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
  • 【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve. 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Widely Compitable】The r134A ac refrigerant charge hose kit can....
Check Stock

Biltek Dual Gauge Oxygen & Acetylene Solid Brass Regulator for Welding Victor Gas Torch Cutting - CGA540 and CGA200 Rear Mount Fitting

  • These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder..
  • Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits.
  • Single Stage Regulator with 2" Diameter Gauges.
  • Oxygen Outlet Pressure: 0-100 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Compatibility: Fits Most Victor Style Torch Sets.
Check Stock

The Weekend Brewer Ball Lock Cornelius Keg Pigtails by

  • MUST HAVE for all cornelius keg owners. Allows for injecting CO2 in and dispensing beer out of standard ball lock kegs..
  • 5FT OF GAS TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • EASY CLEANING by removing the MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

The Weekend Brewer Ball Lock Cornelius Corny Keg Gas Line Assembly

  • MUST HAVE for all cornelius keg owners. Allows for CO2 injection of standard ball lock kegs. CM Becker Disconnect ensure a tight seal every time..
  • 5FT OF TUBING allows for your CO2 tank to be placed in a convenient position. Competitor products make you compromise with only 3ft..
  • WORKS WITH ALL STANDARD REGULATORS. Includes swivel nut for mfl regulators. Remove swivel nut for barb regulators..
  • EASY CLEANING by removing the CMB MFL disconnect and running water through the tubing. Most competitor products use barb disconnects with pex clamps which is extremely difficult to clean..
  • Upgrade your current regulator to our ultimate regulator that works with 5 types of CO2 tanks.
  • including paintball, sodastream, CO2 cartridges, and standard welding tanks. Search B071ZNP5BS to learn more..
Check Stock

Digital Manifold HVAC Gauges Set with Pressure&Temp Test, Digital Refrigerant Gauges Built-in 89 Refrigerant Database, HVAC Gauges Set with Refrigerant Hoses,Temp Clips& 3.5″ LCD Display

  • ...nifold gauge kits are used to install, test and maintain refrigeration equipment (such as air conditioners, refrigerators and cold storage, etc.). Digital gauge has very powerful functions, such as: double pressure test, dual temperature test , digital readout, multi-unit switching, multi-mode function and built-in refrigerant database..
  • 【Condensing Pressure&Temp Test of manifold Gauge】The air pressure gauge can test the minimum pressure when the refrigerant changes from gas to liquid, and the maximum temp when the gas changes to liquid. (The lower the pressure and temp of condensation are, the higher the efficiency of the refrigeration cycle and the greater the refrigerant capacity will do.).
  • 【Evaporation pressure and temperature test of manifold Gauge】The air pressure gauge can test the maximum pressure when the refrigerant changes from liquid to gas. The lowest temp when the liquid becomes gaseous.（The lower the pressure and temp of the evaporation are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do.）.
  • 【The air pressure gauge can be filled with refrigerant through the visual window & Refrigerant type can be set】Built-in 89 kinds of Refrigerant Database. Before filling the refrigerant, you....
Check Stock

Air Regulator with Gauge 125 psi 180F

  • Includes: Air Gauge, Pipe Size - Regulators: , Pipe Size (Regulators): 1/4".
Check Stock

Refrigerator Freon Recharge Hose Kit-R134a R12 R22 Fridge Recharge Tool Kit with 2 BPV31 Bullet Piercing Tap Valves,1 R134a Self-Sealing Adapter, for Refrigerator Refrigerant Refilling (White-Style 1)

  • 【R134A Fridge Freon Recharge Kit】From this R134a refrigerant charging hose kit you will get : 2 Pack of BPV31 bullet piercing tap valves, 1pcs RH r134a self-sealing adapter for r134a self-sealing containers.
  • 【Refrigerator Freon Charging Hose with Guage】The refrigerator charging kit’s guage can reads for r134a/r12/r22/r502 to meet your need as much as possible. One side of the refrigerator charging hose is: puncture type r134a can tap, the other side of the fridge refrigerant refill hose is:1/4 SAE female prot to connect refrigerator coolant pipe or refrigerant service access valve for recharging refrigerant.
  • 【R134a Self Sealing Adapter for Refrigerant Cans】If your refrigerant cans is puncture type mouth, you need to use the r134a recharging refrigerator hose together with this self sealing r134a adapter to connect your piercing refrigerant cans.
  • 【BPV-31 Refrigerator Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Application】Appliance repair workers can use the r134a refrigerator freon refill kit to refill refrigerant for the refrigerator to ensure that the refrig....
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

Digital Manifold Gauge Set Pressure&Temp Test HVAC Manifold Pressure Leak Test Digital Refrigerant Gauges Vacuum HVAC Gauges with Refrigerant Hoses&Temperature Clamps&LCD Display for Air Conditioning

  • ...uipment ]：The digital manifold hvac gauge is used to assist in the installation, testing and maintenance of refrigeration equipment such as air-conditioning and cold storage. It has outstanding features such as dual pressure test, dual temperature test function, digital reading, multi-unit switching, and built-in refrigerant database. Note: The temperature measured by the device is allowed to have a deviation of 3% from the actual temperature..
  • 2.[Built-in Refrigerant Database ]：Digital manifold gauge set hvac has a built-in database of 89 refrigerant pressure-evaporation temperature. Before you fill refrigerant, you can set different types of working refrigerants according to the car needs to fill. Digital manifold gauge set also calculates the degree of subcooling and superheat, which is convenient for direct reading of the operating process data. It also tests the percentage of vacuum measurement,pressure leak measurement..
  • 3.[ Dual Pressure & Dual Temperature Measurement ]：The digital manifold gauge set can measure dual pressure and dual temperature simultaneously to help you determine the cooling capacity of your refrigeration system. The lower the evaporating (Ev)/condensing (Co) pressure and temperature, the more efficient the refrigeratio....
Check Stock

CHEINAUTO 3Pcs AC Manifold Gauge Hose Kit AC Gauge Refrigerants Hose Set Fits R134A R22 R12 R502 R404 R407 R600 5Ft

  • 【3 Colors Design】1/4Inch yellow, blue and red hoses feature a 500 PSI working pressure and 2500 PSI burst pressure-ideal for standard....
  • 【Universal Replacement】Refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit....
  • 【Easy Installation】Strong sealing for durability and safety. Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
  • 【Standard Size】Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end for convenient access to the system..
  • 【Refrigerant Fittings】Refrigeration charging hoses valve discharge conditioning, refrigerant charging, refrigerant discharge, recharge yellow....
Check Stock

Air conditioning Refrigerant Charging Hoses with Diagnostic Manifold Gauge Set and 2 Quick Coupler for R410A R22 R404 Refrigerant charging,1/4' Thread Hose Set 60' Red/Yellow/Blue (3pcs)

  • ★ 60 inch long,1/4 inch yellow,blue,and red hoses feature a 800 PSI working pressure and 4000 PSI burst pressure – ideal for standard refrigerants.
  • ★ Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
  • ★ Manifold with built-in sight glass. Durable metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16″ SAE，refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose.
  • ★ refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4″ SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system.
  • ★100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
Check Stock

Robinair 34102 Refrigerant Tank for R-134a refrigerant not included - 30 lbs Light Blue

  • Refillable 30 pound refrigerant recovery tank for use with R-134a refrigerant (not included).
  • Direct replacement tank for use with Robinair No. 34234, 34300-2K, 34800, 34134A, and 34134-2K Refrigerant Recovery/Recycling/Recharging Stations.
  • 1/2 inch ACME fittings on dual valves necessary for both recovery and recycling.
  • Tank is shipped with a nitrogen fill to prevent moisture contamination and must be evacuated before use.
  • Note: this tank DOES NOT include actual R-134A refrigerant - it is an empty tank (except for temporary nitrogen fill) designed for recovery use.
Check Stock

Refrigerant Charging Hoses with Diagnostic Manifold Gauge Set for R410A R22 R404 Refrigerant charging,1/4" Thread Hose Set 60" Red/Yellow/Blue (3pcs) with 2 Quick Coupler

  • 60 inch long,1/4 inch yellow,blue,and red hoses feature a 800 PSI working pressure and 4000 PSI burst pressure - ideal for standard refrigerants..
  • Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding..
  • Refrigerant charging hose with Diagnostic Manifold Gauge Set deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R410A, R22,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system.
  • Manifold with built-in sight glass. Durable metal casing. Aluminum alloy testing manifold body R410A Connectors (2pc): 5/16" SAE，refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose.
  • Satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first tim....
Check Stock