Categories

Best Reinforced Concrete Pipes

SuperEye S300 Underwater Pinpointer Metal Detector, Waterproof Pinpointer

  • Passed TUV IP68 for full Waterproof to TEN meters deeper than others. It is more visible with orange color when it works underwater..
  • 360 degrees detection and sensitivity reach 4 cm than our standard item.It is more more accurate to determines the position of the metal object ..
  • There are four level light colors showing how nearest the metal objects are. It will glow red light first, and the ranking is red, green, blue, white. Also the pinpointer approaches metal objects more nearby the vibration frequency will be higher..
  • One button design, easy to use for underwater and DIY at home. It can look for locating metal pipes, wires, reinforced concrete, metal screws and thumbtacks , and jewelry you lost at home..
  • The white illumination LED in front of the pinpointer can provides illumination in the situation that is the dark and underwater and help to look for metal objects.
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

3000W Electric Concrete Saw, 14 in Blade Concrete Cutting Machine Circular Saws 3800R/Min with Water Pipe/Pump Wrench Saw Blade for Concrete Granite Tile Masonry Saws

  • HIGH-QUALITY MATERIALS -The head shell of this concrete cutting machine is made of aluminum, the saw blade is made of diamond, the motor material is iron + copper, and the gear is steel. It is strong and durable. It is very suitable for cutting granite, brick, porcelain, reinforced concrete, Metal, cement, steel, wood, etc..
  • MULTIPLE ADVANTAGES - lock the switch, no need to press the switch all the time, labor saving and convenient.
  • external carbon brush design, convenient disassembly and assembly, effectively prolonging the service life of the motor.
  • aluminum alloy gear box, light weight, no deformation, more stable power transmission ..
  • REASONABLE DESIGN - water pipes supply water to the blades to reduce dust. During your operation, the safety cover will block flying objects. Double protection switch prevents accidental opening of the machine. The rotating rear handle and the positioned front handle facilitate accurate cutting in horizontal and vertical modes..
  • ADJUSTABLE CUTTING DEPTH - This concrete saw uses a 14-inch diamond cutting blade. The cutting depth can be deep or shallow (cutting depth: 2-5.1 inches), and it is strong enough to cut most materials. Perfectly meet your needs for various cutting depths..
  • SPECIFICATION - Product Size:25.59 x 15....
Check Stock

The Boy Crisis Why Our Boys Are Struggling and What We Can Do About It

  • Max Drilling Dia.305mm: The power is strong and stable, with the max drilling diameter 305mm. It gives you smooth speed change, and the operation is....
  • Steel Output Shaft: High-quality steel forged output shaft for water supply. It is capable of being used for a long time and staying constructed..
  • Pure Copper Inlet: The inlet is also made of pure copper. So it is made to anti-rust and durable even though it needs to contact water while working..
  • Stable Lifting: High-quality casting material makes the core drill rig sturdy and wear-resistant. With the special handle, the lifting can be....
  • Widely Used: Widely used in drilling reinforced concrete, red brick, marble, and other materials. Such as installing air conditioners, pipes, stair....
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Shank Hole Saw Cutter, ZEONHAK 2 Sets 90 MM SDS Plus, Metal Hole Saw Cutter, Hole Saw Drill Bit for Concrete Cement Stone Wall Drill Bit

  • PREMIUM MATERIALS - The 90 mm concrete hole saw is made of high-quality steel and hard alloy, which is strong, durable, corrosion-resistant, and have a long service life. They can be used for many years even under severe conditions..
  • EASY TO USE - The hole saw kit is easy to use, simple to operate, and the drilling speed is very fast. During use, the chips can be cleanly removed to achieve continuous and efficient operation..
  • VALUE FOR MONEY - The 90 mm hole saw has been adopted fine craftsmanship and strict design, so the welding interface is very firm and precise, and the appearance is exquisite and generous. The hole saw diameter is 90 mm (3.54 inches)..
  • WIDE RANGE OF APPLICATIONS - The SDS Plus shank concrete hole saw is very suitable for drilling holes in walls, bricks, concrete, cement, adobe, and stone. It is a perfect choice for installing air conditioners, water heaters, exhaust pipes, water pipes and sewers..
  • 100% GUARANTEE - If our concrete hole saw has any quality problems, you can request a full refund and return within 30 days after receiving the products. Quality and customer satisfaction are our top priorities. If you have any questions, please don't hesitate to contact us at any time. You have no risk, click Add to Cart!.
Check Stock

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock

Bosch Professional 0601010008 D-tect 150 SV Professional Detector

  • Unique: reliable detection of objects in damp concrete.
  • Millimetre-accurate detection of ferrous/non-ferrous metals, live cables, wooden studs and plastic pipes.
  • The actual object depth is displayed, making it easy to determine the actual level of concrete cover.
  • The Signal View/SV displays objects that are very close together even more precisely.
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • PREMIUM MATERIAL: The concrete hole saw set is made of high quality tungsten steel and carbide, which is high wear-resistant and durable. From the selection of raw materials to the production, we have carried out strict screening and monitoring. And this hole saw set will provide years of service even under severe use..
  • PACKAGE INCLUDED: 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • 2 PCS center drill bit 4-1/3”(110mm), which let you quickly punch clean holes in the most commonly needed sizes..
  • SHARPER BLADE: Our concrete hole saw kit feature a unique blade design, coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
Check Stock

MEXUD-10M Waterproof Pipes Duct Self Adhesive Bookbinding Repair Cloth Tape (Brown)

  • Adheres to most of the surfaces including metal, concrete,wood,rubber,nylon and plastic.
  • Suitable for the use on pipes, ducts, insulation and construction industries.
  • Package includes: 1PC x 10M Waterproof Pipes Duct Self Adhesive Bookbinding Repair Cloth Tape.
  • Color:Red/Black/Blue/Brown/Green/Silvery Gray/White/Yellow.
Check Stock

Concrete Donuts spraydonutfull9 EMW7376437, Small Full, Green

  • Protects the Heads from Mowers Edgers Landscapers and Teenage Drivers.
  • Displaces the Weight of a Vehicles Tire Aiding in the Prevention of Broken Heads and Pipes.
  • The Concrete is impregnated with Fiber for additional strength and the entire mixture is dyed green to blend with the Grass.
  • Water Loss Prevention It aids in the prevention of the breaking of Sprinkler Heads and Pipe.
  • The Donut is produced using the most advanced technology in Concrete mixture combinations for strength and freeze resistance.
Check Stock

Concrete Donuts for a Rotary Head Half, Large, Green

  • Protects the Heads from Mowers Edgers Landscapers and Teenage Drivers.
  • Displaces the Weight of a Vehicles Tire Aiding in the Prevention of Broken Heads and Pipes.
  • The Concrete is impregnated with Fiber for additional strength and the entire mixture is dyed green to blend with the Grass.
  • Water Loss Prevention It aids in the prevention of the breaking of Sprinkler Heads and Pipe.
  • The Donut is produced using the most advanced technology in Concrete mixture combinations for strength and freeze resistance.
Check Stock