Categories

Best Relay Power Relay

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

  • The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • Equiped with high-current relay, AC250V 10A.
  • DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
  • You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
Check Stock

uxcell 2 Pcs 4.7 Ohm 2 Pin Refrigerator Start Relay for Compressor Black

  • Total Size: 3.2 x 2.2 x 2.85cm / 1.26" x 0.87" x 1.12".
  • Pretty generic start relay used on various brands of mini fridges and coolers.
  • How to Select Relay : Shop relay, consistent of size,resistance and pin quantity as replacement.
  • Relay Breakdown Judgment : For start relay,shake it,with noise of debris collision,is broke..
Check Stock

Wiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)

  • Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
  • 2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
  • Detail:Operating Voltage: 12V,Amp: 40A ,Power Relay Fuse: 40A ,Blade Fuse: ≤180W.
Check Stock

788-304, Electromechanical Relay 24VDC 1.26KOhm 16A SPDT (15x86x53) mm Socket Switching Relay

  • Our Power Relay and Socket Base all through UL and CE certification.Product Name:subminiature Power Relay.
  • Contact Rating: 6A 250VAC / 30VDC, Construction: Plastic seaied..
  • Relay Model:HF41F/24-ZS , Relay Slim size (width 5mm), Outline size:28×5×15mm.
  • Socket Model: 41F-1Z-C2, Size : 70.9 x 88.3 x 6.3mm / 2.798"x3.48"x 0.25"(H*L*W).
  • Package Content : 3× Power Relay , 3× Socket Base, 1x Rail Slotted Aluminum , 2×Screw.
Check Stock

Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(12VDC)

  • Our Power Relay and Socket Base all through UL and CE certification.Product Name:subminiature Power Relay.
  • Contact Rating: 6A 250VAC / 30VDC, Construction: Plastic seaied..
  • Relay Model:HF41F/24-ZS , Relay Slim size (width 5mm), Outline size:28×5×15mm.
  • Socket Model: 41F-1Z-C2, Size : 70.9 x 88.3 x 6.3mm / 2.798"x3.48"x 0.25"(H*L*W).
  • Package Content : 3× Power Relay , 3× Socket Base, 1x Rail Slotted Aluminum , 2×Screw.
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

  • 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
  • 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
  • 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
  • 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
  • control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
  • 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check Stock

Anfukone T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Panel

  • It is perfect used in the remote control, communication, automatic control system, electronic equipment's..
  • Relay contacts : 003cbr003e Terminals 1 and 8 public points ；003cbr003e Terminals 2 and 7 Relay Coil Voltage.
  • 003cbr003e Terminals 3 and 6 N/O Normally Open.
  • 003cbr003e Terminals 4 and 5 N/C Normally Closed.
  • Total Size (Approx. ): 1. 4" x 1. 4" x 2. 6".
  • 003cbr003ePackage : 1 x Power Relay & Socket..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Innovited HID Replacement Bi Xenon Relay Wiring Harness Hi Lo - H4 9003 HB2

  • [High quality chip]:This product adopts imported high-performance USB control chip..
  • [Stable connection]:This board is designed with square type-b USB interface which assures the stable connection..
  • [Stable performance]:The high quality relay and dedicated relay driven ULN2803 chip ensure relay to work more stably..
  • [Flexible and convenient]:There are two flexible and convenient power input methods, power socket and terminal..
  • [Practical setting state]:The relay can maintain the setting state even if the computer is power off or USB is disconnected from computer after....
Check Stock

ELECTRONICS-SALON DPDT Signal Relay Module, 12Vdc, RY12W-K Relay. Has Assembled.

  • This item has been assembled, and electrical test passed..
  • Size: 50 x 34.9 x 16 mm (approximately 2" x 1.37" x 0.64"), PCB thickness: 1.6mm..
  • high quality signal relay, FR-4 Fiber glass PCB, darlington transistor driving relay, LED indicator for relay action..
  • Relay Contact Material: Gold Overlay Silver-Palladium..
Check Stock