Categories

Best Release Liner

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

Bianchi AccuMold Elite Bianchi, 7950 AccuMold Elite Sam Browne Belt, Basket Black, Small 28'-34'

  • 2. 25 inch belt width, fits 28-34 inch waist (71. 12-86. 36 CM).
  • Coplok shatter-resistant, polymer buckle features 3-point release for added security.
  • Closed-cell foam for support and comfort.
  • Duraskin leather-look exterior with loop lining for use with Bianchi 7205 Liner Belt.
  • This is a duty belt designed to fit over clothing, sizing up may be required especially if close to being in between sizes..
  • Duraskin exterior with loop lining for use with Bianchi 7205 belt liner.
  • Tri-Release shatter resistant, polymer buckle features 3-point release for added security.
Check Stock

BIANCHI 7955 ErgoTek Duty Belt - 2.25 Belt Loop Basket Weave 1017099 36-38

  • Duraskin exterior with loop lining for use with Bianchi 7205 Liner Belt.
  • load support cushions on inner lining spread....
  • Tri-Release shatter resistant, polymer buckle features 3-point release for added security.
  • Belts are 2" (50mm) oversized to accommodate liner belt and padding. Specify exact waist size when ordering..
Check Stock

3M Scotch 924 ATG Tape: 1/2 in. x 33 ft. (Clear Adhesive on Tan Liner)

  • 3M Scotch 924 ATG Tape is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner)..
  • 3M 924 is a permanent, all-purpose transfer tape that offers excellent adhesion to most paper stocks. 3M Scotch 924 ATG Tape has good solvent resistance and excellent UV resistance..
  • Can bond a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics. Some application ideas include mounting promotional items and posters, core starting, and mounting picture frame mat boards and dust covers..
  • The main difference between 3M 908 and 3M 924 ATG tapes is that 908 is pH neutral (acid-neutral). Scotch 924, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser..
  • Carrier/Backing: N/A (Unsupported). Adhesive: medium-firm acrylic. Release Liner: tan densified Kraft paper. Thickness: 6 mils (carrier, adhesive, liner) 2 mils (carrier, adhesive) 4 mils (liner). Adhesion: 25 ounces per inch (to stainless steel test panel). Service/Operating Temperature: up to 180F. Core: 1-inch diameter plastic..
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • ...ates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier) 5 mils (liner). Adhesion....
Check Stock

3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray

  • ...ates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 45 mils (carrier) 5 mils (liner). Adhesion....
Check Stock

3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black

  • 3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
  • Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
  • Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
  • Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
  • Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..
Check Stock

INNOMAX Genesis 900 Super Waveless Lumbar Support Sponge Bed Waterbed Mattress, Queen

  • ...nd Gravity Neutral Fluid Suspension premium enhanced Mid-Body Support system.
  • Multi-Layer wave elimination system and 24 mil premium paralyzed vinyl Sculpted Body Profile sleep surface and generously overcut Low Tension design.
  • 4 Way tethered support system for Integrated Internal Component Stabilization Phase II air release valve and recessed black bottom L Seam construction.
  • Use with approved Waterbed Heater Waterbed Safety Liner Waterbed Water and Vinyl Conditioner Do Not Fill above Safety Liner.
  • Genesis 900 super wave less sponge bed deep fill queen waterbed mattress for full depth rigid side box frame wave less performance.
  • Pressure relieving sponge featuring wave less performance and gravity neutral fluid suspension premium enhanced mid-body support system.
  • Multi-layer wave elimination system and 24 mil premium paralyzed vinyl sculpted body profile sleep surface and generously overcut low tension design.
  • 4 Way tethered support system for integrated internal component stabilization phase ii air release valve and recessed black bottom l seam construction.
  • Use with approved waterbed heater waterbed safety liner waterbed water and vinyl conditioner do not fill above safety liner.
Check Stock

JVCC FELT-09 Polyester Felt Tape [4mm thickness felt] 1 in x 10 ft Black

  • JVCC FELT-09 Polyester Felt Tape is a 4mm thick synthetic needle punched felt made from polyester fibers. One side is felt, and the other side has....
  • On many of the adhesive felt products the rolls will have an approximately 2-inch to 4-inch leader of double-sided film tape applied to the release....
  • It is sometimes easier to try to peel the corner of the felt away from the release liner (instead of the release liner away from the felt) since you....
  • Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries. JVCC FELT-09 hides seams being....
  • Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum).
Check Stock

Polyken 105c 2 x 25 blue plastic liner [PRICE is per ROLL]

  • Release Liner: low-density polyethylene (LDPE) film.
  • Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner).
Check Stock

TRIANGLE Lightweight Full Face Motorcycle Street Bike Helmets with Extra Clear Visor DOT Approved (Small, Matte Black)

  • Lightweight and durable ABS shell with high pressure thermoplastic technology，aerodynamic design.
  • Meets or Exceeds FMVSS-218 and DOT Safety Standards..
  • 2 visors，comes with clear and tinted visor，clear vision and beautiful glossy UV protective finished.
  • Ventilation system with top and rear extractors liner..
  • Multi Density EPS interior liner，Fully removable、comfortable and washable.
  • Quick Release Quick release clasp and strap.
Check Stock

TRIANGLE Lightweight Full Face Motorcycle Street Bike Helmets with Extra Clear Visor DOT Approved (Large, Matte Black)

  • Lightweight and durable ABS shell with high pressure thermoplastic technology，aerodynamic design.
  • Meets or Exceeds FMVSS-218 and DOT Safety Standards..
  • 2 visors，comes with clear and tinted visor，clear vision and beautiful glossy UV protective finished.
  • Ventilation system with top and rear extractors liner..
  • Multi Density EPS interior liner，Fully removable、comfortable and washable.
  • Quick Release Quick release clasp and strap.
Check Stock

TRIANGLE Lightweight Full Face Motorcycle Street Bike Helmets with Extra Clear Visor DOT Approved (Medium, Matte Black)

  • Lightweight and durable ABS shell with high pressure thermoplastic technology，aerodynamic design.
  • Meets or Exceeds FMVSS-218 and DOT Safety Standards..
  • 2 visors，comes with clear and tinted visor，clear vision and beautiful glossy UV protective finished.
  • Ventilation system with top and rear extractors liner..
  • Multi Density EPS interior liner，Fully removable、comfortable and washable.
  • Quick Release Quick release clasp and strap.
Check Stock