PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve
- The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
- This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
- Kit Includes PPE Viton O-Ring 1137073001.
Check StockAcecare Charging Station Also Called Filling staion for Compressed air refilling
- CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
- WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
- EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
- WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
- WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock
Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack
- Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
- Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
- Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
- Made of brass. Max. inlet pressure of pumps is 200 PSI..
- Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check StockRK34-975XL Backflow Preventer Repair Kit -3/4 1 Complete Repair Kit with Springs
- Contains instructions, easy to repair, effectively solve the problem of water leakage..
- Compatible with 3/4-1" 975XL and 975XL2 Reduced Pressure Backflow Preventer..
- Contains: (1) O-ring for relief valve stem, (1) #1 check spring, (1) #2 seal rings, (1) relief valve seal ring, (1) diaphragm, (2) O-rings for check....
- Note: Please clean up the debris in the pressure reducing valve during installation to avoid water leakage caused by inability to seal..
Check StockEVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800
- INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
- Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
- APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
- RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
- Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock
Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew
- ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
- The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
- ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
- ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
- ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check StockWebstone 44443WPR-LF 3/4' IPS Isolator EXP E2 Tankless Water Heater Service Valve Kit with Clean Brass Construction
- Lead free - meets all federal & state standards for lead levels in Drinking water system components.
- 3/4 IPS lead free isolator EXP E2 with lead free pressure relief valve.
- Hot and cold set tankless water heater service valve.
- Full port brass ball valves with adjustable packing gland.
- Hi-flow hose drains ( 500 WOG) &pressure relief valve ( 150 psi/200K BTU).
Check StockDEF Fuel Injector Common Rail Fuel Plug-1050070 for 2003-2007 Ram 2500 3500 5.9L
- Fitment:2003-2007 Ram 2500 3500 and 5.9L Cum-mins..
- Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
- Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
- Features:Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
- Benefits:Weld-free construction that give fuel valve better leakproofness.Capped off completely pressure relief valve increase security..
Check StockAeromotive 15633 Fuel Pressure Gauge - 0 to 100 psi
- 5'' Diameter 0-100 PSI Liquid Filled Includes integral pressure relief valve.
Check StockAeromotive 15632 Fuel Pressure Gauge - 0 to 15 psi
- 5'' Diameter 0-15 PSI Liquid Filled Includes integral pressure relief valve.
Check StockAMTROL ST-5 Thermal Expansion Tank
- Accepts expanded water caused by thermal expansion.
- Returns water to the system when hot water is used.
- Prevents the relief valve from going off.
- Prevents dripping faucets, intermittent toilet fill and pressure relief valve discharge.
- Protects water heater, appliances and fixtures.
Check StockPPE 50-STAGE LEGAL Replacement Fuel Valve 113073000 & Viton O-Ring 113073001 Compatible with 2004.5-2010 GM 6.6 LLY/LBZ/LMM Duramax & 2007.5-2018 Ram 6.7 Diesel
- California Air Resources Board Executive Order Number: D-701-12.
- The PPE Replacement Fuel Valve (heat-treated stainless steel) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure opening, returning fuel to the fuel tank..
- Fitment: 2004.5-2010 GM 6.6L Duramax Diesel | 2007.5-2018 Dodge Ram 6.7L Diesel.
Check StockLF10-4H Pressure Switch, 4 Port Air Compressor Pressure Switch Replacement Control NPT1/4 95-125 PSI 20A
- ✅ [Size]--6.3 mm unloader valve connection, 1/4 inch NPT Female connection. Cut off pressure 95-125 PSI.With relief valve can avoid the overload operation of the air compressor..
- ✅ [Part number]--LF10-4H-1-NPT1/4-95-125.This pressure switch is designed for a single stage or two stage air compressor pumping up to 125 PSI..
- ✅ [More conveient to use]--The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports..
- ✅ [Intelligent handle design]--The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch..
- ✅ [More safer to use]-- This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi..
Check Stock
