2 Pack Universal Ceiling Fan Remote Control Kits, Wireless Remote and Receiver Kits for Harbor Breeze Hunter Honeywell Hampton Bay Kichler Ceiling Fan lights, Fan Speeds Lamp ON/OFF and Timing Control

  • ...an remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light..
  • RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs..
  • Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE..
Check Stock

Electric Chain Hoist Crane Overhead Tower Bridge Industrial Wireless Radio Remote Control Transmitter and Receiver AC DC 12-24V 6 Buttons w/Emergency Stop 12-24V AC/DC

  • ...e remote control, Strong penetration, no need to aim. Industrial wireless crane hoist remote control comes with a pair of Cut Resistant Gloves. The HPPE Level 5 High Performance Gloves is 10 times sturdier than normal labour gloves, softer and more breathable than leather/silicone gloves.
  • ⠿【Radio Transmitter and Receiver with Reinforced Fiber Plastic Shell】: The lightweight durable transmitter using ergonomic design,comfortable to hold in hand. The radio transmitter and receiver is made of PA65 reinforced flame retardant material, which has strong anti-pressure ability, waterproof, anti-corrosion and insulation.Rugged attachment to the receiver housing to prevent damage from strong impact and frequent drops.
  • ⠿【Silicone Switch Buttons and Quality Circuit Board】: Circuit board of the overhead tower crane remote control has good safety performance. the remote control adopts dust-proof structure and high-performance metal contact button for durability. Durable silicone wrapped buttons for you to press more comfortable. The overhead remote control is equipped with an Emergency Stop Switch on the upper left corner for more convenience.
  • ⠿ 【IP65 Class Dust-proof and Waterproof】: Our overhead tower crane remote control launch and receive extern....
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

OPENROAD 880 LBS Lift Electric Hoist Crane Remote Control Power System with Emergency Stop Switch Electric Winch Zinc-Plated Steel Wire Hoist for Garage Ceiling Crane Overhead (400kg)…

  • ...e remote control, Strong penetration, no need to aim. Industrial wireless crane hoist remote control comes with a pair of Cut Resistant Gloves. The HPPE Level 5 High Performance Gloves is 10 times sturdier than normal labour gloves, softer and more breathable than leather/silicone gloves.
  • ⠒【Radio Transmitter and Receiver with Reinforced Fiber Plastic Shell】: The lightweight durable transmitter using ergonomic design,comfortable to hold in hand. The radio transmitter and receiver is made of PA65 reinforced flame retardant material, which has strong anti-pressure ability, waterproof, anti-corrosion and insulation.Rugged attachment to the receiver housing to prevent damage from strong impact and frequent drops.
  • ⠒【Silicone Switch Buttons and Quality Circuit Board】: Circuit board of the overhead tower crane remote control has good safety performance. the remote control adopts dust-proof structure and high-performance metal contact button for durability. Durable silicone wrapped buttons for you to press more comfortable. The overhead remote control is equipped with an Emergency Stop Switch on the upper left corner for more convenience.
  • ⠒【IP65 Class Dust-proof and Waterproof】: Our overhead tower crane remote control launch and receive externa....
Check Stock

Xbox One IR Extender Emitter Blaster Cable (4 Head, 10 Foot)

  • Hidden Infrared Repeater System comes with 1 Receiver, 4 Emitters as well as an Adapter for power supply. You can control up to 4 different devices or A/V components such as cable box, Blu ray/DVD player, amplifer and etc even they are placed inside of your cabinet with door closed and even behind the wall..
  • Receiver comes with LED confirmation indicator, picks up signal sending from remote control. You should place the receiver pointing straight to where you use remote control..
  • Emitter sends signal from your remote control to other devices placed behind the door or wall..
  • The receiver cable comes with a USB plug and the package comes with a 5V adapter. You may either take power from devices with USB port or directly from power point with the use of 5V adapter..
  • Compatible with all devices within 34 to 60 kHz. Extra Long cable: 6 Feet for Receiver Cable and 9 Feet for Emitter Cable.
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission,Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

X-WLANG Upgraded Wireless Light Switch and Receiver kit, Remote Control Light Switch and Wireless Switch kit, No Wiring, Quickly Create Switch for Ceiling Lights, Fans, Lamps etc, White

  • ...eely and also won't affect the existing system.
  • ✅【Strong Signal and Safety 】- Strong RF signal works through walls and doors without any interference and Remote control halogen lamps, your bulbs, LED lights etc, Remote Control Range:100 Feet (Free Area), Pull out the Anttena which is black wire(17cm long) from Receiver box. Range is 150 feet ,Max output power: 1000W..
  • ✅【 Programmable and Expandable】- Remote control light switch, One Wireless receiver can hold up to More Remote Control Panels. And one Remote Control panel holds up to More Wireless Receivers . Ideal to control your garage ,garden shed and outside light comfortably.Switch and receiver have been pre-programmed for immediate use..
  • ✅【 Widely Used on Various Appliances】- Small receiver fits limited space like rose/canopy, electrical junction box, switch box. Widely Use in ceiling lights, indoor lighting fixtures, plug-in pendant, hard-to-reach lights, lamps and other electric appliances with wall switch etc. Working temperature Range: -25℃ ~+65 ℃..
  • ✅【Best Quality GUARANTEED003c/b003e】- 450,000 times for the receiver, 700,000 times for Switch Button .Self-tape provided for installation. RoHS, CQC,CE, FCC Certified.16-month warranty and friendly 24-hour customer servic....
Check Stock

Yamaha OEM RAV557 Receiver Remote Control PN: ZW916800

  • Yamaha RAV557 Receiver Remote Control OEM For: RX-A1070 - RX-A1070BL.
  • New OEM remotes sourced from US suppliers. Always use new batteries..
  • OEM remote controls are not universal and should be replaced by the part number of the remote or the model number of the receiver only..
  • Any needed information on remote control use is found in the owners manual for the receiver model number..
Check Stock

Universal Ceiling Fan Remote Control 53T and Receiver Kit Add to Any 3-Speed Fan with Dimming for Hampton Bay, Harbor Breeze,Hunter Remote Controls

  • ...eiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse..
  • SUPER SMALL SIZE: Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size..
  • ADVANCED TECHNOLOGY: Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime..
  • 3-IN-1 Multi-FUNCTIONS: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
  • 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H.
  • 1 button for light ON/OFF control (no dimming). NOTE: If you have P....
Check Stock

YukiHalu 3-in-1 Small Size Universal Ceiling Fan Remote Control Kit with Light and Timing, Wireless Remote Control and Receiver Kits for Ceiling Fan Lamp

  • ...eiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse..
  • 【SUPER SMALL SIZE】: Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size..
  • 【ADVANCED TECHNOLOGY】: Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime..
  • 【3-IN-1 Multi-FUNCTIONS】: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
  • 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H.
  • 1 button for light ON/OFF control (no dimming). N....
Check Stock

FAN28R Ceiling Fan Remote Control Receiver 240w, Replacement for Hampton Bay Harbor Breeze, Replace 28R FAN18R 18R, Works w/FAN-53T FAN-11T KUJCE9103 Fan-HD FAN-35T1 UC7030T (Receiver Only)

  • 【 Only Receiver 】 This item is only a FAN28R(5+5 μF) 240w receiver (4 code DIP switches) for ceiling fan remote control, the remote/transmitter and 9V battery are NOT included. This receiver compatible with 110V 3-speed AC ceiling fans including Harbor Breeze Hampton Bay Hunter etc. Replacement for FAN-28R FAN18R..
  • 【 Ceiling Fan & Light Remote Control 】 This receiver designed to separately control the ceiling fan speed(HI, MED, LOW, OFF) and light brightness(ON,OFF,DIMMING), it to work with ceiling fan that requires a remote control. Compatible with remote models: FAN-53T FAN-11T Fan-HD FAN-35T1 FAN-35T HD5 UC7030T KUJCE9103 L3HFAN51T FAN-51T RR7079T..
  • 【 Light Dimming 】 Light dimmer of this 28R receiver compatible with incandescent light bulbs and some dimmable LED lamps. Most LED lights and all CFL lamps are non-dimmable, light dimmer only supports the ON/OFF function in that case, and it may cause to flicker when using the dimming function..
  • 【 NOTICE 】 Please make sure your remote matches this receiver before buying. If not sure, we recommend to purchase a complete kit in our store. Please check the s....
Check Stock

Ceiling Fan Remote Control Replacement for Hampton Bay Hunter UC7078T CHQ7078T CHQ8BT7078T L3H2003FANHD Fan-HD Fan-HD6 RR7078TR, with Reverse

  • 【Ceiling Fan Remote Control】This is a Hampton Bay uc7078t remote control, but not a universal remote control, this ceiling fan controller is a replacement for Hampton Bay or Hunter’s UC7078T and CHQ7078T. Does not include receiver and 9v battery (required). This is the handheld remote for the ceiling fan. This remote has a reverse button..
  • 【Ceiling Fan Remote Control Function】It has 3 speeds (High/Medium/Low) to control the fan. Hampton Bay Ceiling Fan Remote Control Operation: Reverse, Fan Off, Fan Speed ??(Low, Medium, High). Lamp on/off and dimming function, the dimmer only controls the brightness of incandescent and dimmable LED/CFL lamps, other LED/CFL bulbs only control the bulb switch. With reverse function, control the fan to rotate forward or reverse (this function requires the receiver to be compatible or support the reverse function).
  • 【Fan Remote Control Compatible】Make sure your original remote control is the same as the picture, and check the numbers on the back of the original remote control, it needs to have FCC ID/model: L3H2003FANHD/FAN-HD, CHQ7078T/UC7078T or FAN-HD6, otherwise the remote control It may be the same as your receiver mismatch..
  • 【Easy to Install】BAYICON Ceiling Fan Remote Control, Original OEM,....
Check Stock

Ceiling Fan Remote Control Kit, Timing Wireless Remote Control

  • ...l and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage..
  • ☞Easy Install – Wireless remote controller kit for ceiling fan lamp Please check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan ,New technology make the ceiling fan remote controller kits to be more safe and long lifetime. Installation is very easy and fast, It is a nice looking remote and with rubber textured buttons that are easy to press and it comes with a holster you can mount to the wall..
  • ☞Multi-Functions- Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF.
  • 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H.
  • 1 button for light ON/OFF control (no dimming). NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.CE / ROHS Certification.
  • ☞Convenience and Fast- Set switch lights, wind speed adjustment, Timing, one key to complete, conv....
Check Stock