Best Remote Window Crank Handle

PRIME-LINE Products H 3966 Spline Socket Crank Handle, Stone, Smooth 360-Degree Operation

• CASEMENT CRANK HANDLE – The H 3966 Casement Window Crank Handle from Prime-Line features 3/8-inch bore and a 3-1/8-inch reach. It has a smooth 360-degree operation that allows you to easily open and close windows as needed..
• DIECAST CONSTRUCTION – This window crank features a durable diecast construction with a stone finish..
• INSTALLATION – A Phillips head screwdriver will be required for the easy slip-on installation. The 3/8-inch bore is held firmly in place with the supplied set screw..
• COMPATIBILITY – This Prime-Line Casement Crank Window Handle can be use on 3/8-inch spindles, including on most older Anderson casement operators..
• PRIME-LINE GRADE – We specialize in repair and replacement hardware products for your home. Prime-Line’s commitment to quality results in repairs which look as good as the initial install, making us the go-to solution for our loyal customers..

Prime-Line TH 24086 Entrygard Nesting Operator Cover and Crank, White

• Use this cover and handle with casement and awning operators that have 5/16 in. diameter splines.
• The unfolded (opened) crank handle extends a total of 5 in. inward, but folds and nestles down to a low profile.
• The operator cover is constructed of molded plastic, and the crank handle of diecast zinc.
• The window crank features a set screw at the base of the handle allowing it to lock onto the spindle.
• Both the operator crank handle and cover are easy to install.

Prime-Line H 3514 9 inch Diecast Construction Aluminum Painted Finish Left Hand Casement Operator with Square Body

• Used on old style, steel-framed crank-out casement windows.
• This is a left-handed operator. Handing is determined when facing the window from the inside looking out. Like the hinges, this operator will also mount on the left side of the window.
• Hardened steel constructed arm and drive gears.
• Equipped with a diecast crank handle and a 9 in. long hardened steel arm.
• Installs with 4 screws. 1 pair spaced apart at 3-7/8 in. on center, and another pair at 4-3/4 in. on center.

Hunter Fan Company HPAC-10C150 Hunter 10,000 (6,500 BTU DOE) Portable Air Conditioner for Rooms Up to 450 Sq. Ft, White

• 10, 000 BTU cooling capacity helps you keep your cool all summer long. Quickly cool, dehumidify and circulate fresh air in any room in your home up to 450 sq. ft. in size..
• Hunter uses a self-evaporative system to vent excess moisture through window exhaust. Built-in dehumidifier removes up to 2. 45 pints of moisture every hour..
• Easy-to-install window installation kit works with most vertical and horizontal sliding windows between 18-50 inches. This unit will NOT work with crank windows..
• Features 3 operating modes: Cool, Dry and Fan. Multiple fan speeds..
• Additional features include adjustable thermostat, remote control, quiet operation, 8-hour sleep timer, LCD display screen, washable filter, adjustable air discharge louvers, caster wheels and transport handle..

Hunter Fan Company HPAC-14C150P Hunter 14,000 (8,600 BTU DOE) Portable Air Conditioner with Heat Pump for Rooms Up to 700 Sq. Ft, White

• 14, 000 BTU cooling & heating capacity helps you keep your home comfortable all year round. Quickly cook, heat, dehumidify and circulate fresh air in any room in your home up to 700 sq. ft. in size..
• Hunter uses a self-evaporative system to vent excess moisture through window exhaust. Built-in dehumidifier removes up to 3. 11 pints of moisture every hour. Drain hose included for continuous use during Dry Mode and Heat Mode..
• Easy-to-install window installation kit works with most vertical and horizontal sliding windows between 18-50 inches. This unit will NOT work with crank windows..
• Features 4 operating modes: Cool, Heat, Dry and Fan. Multiple fan speeds..
• Additional features include adjustable thermostat, remote control, quiet operation, 8-hour sleep timer, LCD display screen, washable filter, adjustable air discharge louvers, caster wheels and transport handle..

SERIES 525 CASEMENT SINGLE VENT (X) LEFT/RIGTH OUTSWING (30\W x 72\H)

• Special 3/8" PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE - 3 Colors Measures 2 3/8" Across X 3/4" Tall PELLA WINDOW MECHANISMS ONLY!.

Special 3/8\ PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE (Copperite)

• Special 3/8" PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE - 3 Colors Measures 2 3/8" Across X 3/4" Tall PELLA WINDOW MECHANISMS ONLY!.

Amazon Basics Portable Air Conditioner with Remote - Cools 450 Square Feet 10,000 BTU ASHARE / 6000 BTU SACC

• Remote controlled, portable air conditioning unit cools and dehumidifies rooms up to 450 square feet with standard 8 ft. ceiling.
• Easily exhaust hot air through a window with the unit’s expandable outtake hose.
• venting kit with sealing, side panel leaf covers, bracket, and....
• Rolling caster wheels and easy-grip side handles make moving and re-positioning unit convenient.
• LED light display with full-function remote control (remote batteries not included).
• includes 3 speeds, 3 cooling settings, and automatic timer.
• Fits standard windows and can be customized for non-traditional windows such as crank and egress.

Andersen Operator Handle in Stone (1974 to 1995) - 0532408

AutoE 2X Car Window Winder Crank Door Handle Black (for Honda/Civic 1984-2000)

• The mounting hole size : 11.8mm (Please make sure its the same as yours).

Performance Tool W80646 Door/Window Handle Clip Tool, 1 Pack

• Removes and installs door handle and window crank retainer clips on many popular vehicles..

Tenpoint Xtend Adjustable Crank Handle Universal Fit

• Crank Handle starts at a compact 5-inches long and extends to its user-friendly length of 7. 5-inches.
• When extended to its full length, the crank handle decreases the cocking effort by approximately 45% over the standard crank.
• Includes part to convert the Xtend Crank Handle from a square drive to a hex drive for use on ACUdraw Pro or ACUdraw units.
• Employs a unique torque control mechanism that eliminates the possibility of over-cranking any acudraw unit once the crossbow is Cocked.
• Greatly reduces the chance of damaging the acudraw while attempting to cock crossbow.

Samfox Ball Crank Table Handle - Machine Crank Handle for Bridgeport Milling Mill d26

• Ball Crank Table Handle is safe and convenient to replace the handle.
• Milling Machine Ball Handle is made of high hardness material, durable to use..
• Three ball crank table handle for milling machine using..
• D26 Ball Crank Table Handle is suitable for most milling machines.