Categories

Best Resin Bonded Cbn Wheel

Drill Bit Sharpening Tool Portable Diamond Drill Bit Grinder for Drill Polishing Wheel Drill Bit Sharp Sharpener Universal Fits 1/4” (6.35mm) with Extra Corundum Grinding Wheel Screwdriver Wrench

  • 【Grinding wheel is optional:】 CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • 【Angle adjustable:】 point angle 100° (90 ) ~ 135° , adjust the grinding angle by changing the positioning pin, and control accurately..
  • 【11-Standard collet:】 Grinding range: ф3-ф13 (ф3, ф4, ф5, ф6, ф7, ф8, ф9, ф10, ф11, ф12, ф13).
  • 【Upgrade:】Upgrade the knife seat for more accurate positioning.
  • upgrade the grinding seat for more convenient grinding, put it in the collet, and it can be completed once in 180 °.
  • 【Strong DC motor:】 electronic control DC motor is stable frequency, strong horsepower, prolonged use and low noise..
Check Stock

POWERTEC 15519 Aluminum Oxide Grinding Wheel 100 Grit, 6\ x ¾\ with 1/2\ Arbor

  • INCLUDES: (1) Diamond Grinding Wheel Dresser Tool.
  • FUNCTION: Seamlessly clears unwanted debris and impurities while moving the diamond surface across the wheel to reveal sharp and clean surfaces - making abrasive deburring and grinding wheel dressing quick and easy.
  • APPLICATIONS: Perfect for resin bonded, chlorinated, mechanized, and silicone carbide grinding wheels.
  • BUILD: Constructed with premium quality metal, this handheld wheel dresser comes with ridged handles for easy grip, along with guide bars and mounting.
  • SPECS: Overall tool length is 4-5/8” long with a 1/2” x 1-3/4” diamond surface, and a silver 36 grit diamond chip.
  • Returns your wheels to peak-performance readiness.
  • Clears unwanted debris and impurities from your grinding wheels revealing sharp clean cutting surfaces.
Check Stock

3M Green Corps Cut-Off Wheel 20275, Ceramic, 13300 rpm, 4-1/2" Diameter x 3/64" Width, 7/8" Arbor, Green (Pack of 50)

  • Ceramic abrasive grain cuts faster and lasts longer than non-ceramic grain, offering significant productivity gains.
  • Performance far surpasses that of aluminum oxide wheels.
  • Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys.
  • Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.
  • MUST BE USED WITH ANSI-APPROVED FLANGES FOR TYPE 1 CUT-OFF WHEELS AND A WHEEL GUARD THAT FITS THE SIZE OF THE CUT-OFF WHEEL.
Check Stock

HFS(R) Grinding Wheel Dresser Handheld Diamond Wheel Dressing Surface Metal for Lathe Dressing Tool Clean Grinding Wheel

  • [PREMIUM QUALITY METAL] Constructed with premium quality metal, this handheld wheel dresser comes with ridged handles for easy grip, along with guide bars and mounting. Perfect for resin bonded, chlorinated, mechanized, and silicone carbide grinding wheels..
  • [PRECISION TRUING& SOLID CONSTRUCTION] Precision truing, or squaring up the face of the wheel, can be executed quickly and easily.
  • just move the diamond surface over the wheels. Solid construction means tool is long lasting..
  • [DRESSES YOUR GRINDING WHEELS TO PERFECTION] Diamond Grinding Wheel Dresser (36 grit diamond chips) dresses your grinding wheels to perfection. These handy and hardworking accessories expose clean, flat, sharp cutting-surfaces, by clearing the wheel's surfaces of unwanted impurities and debris..
  • [SEAMLESSLY CLEAN] Seamlessly clears unwanted debris and impurities while moving the diamond surface across the wheel to reveal sharp and clean surfaces - making abrasive deburring and grinding wheel dressing quick and easy..
  • [SIZE AND MATERIAL]: Diamond. 4.53''*1.77''(115*45mm).
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 1" x1" x 6", Made in The U.S.A. - 5 Pack

  • Diamond & CBN wheel dressing applications.
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

LENOX Tools Cutting Wheel Diamond Edge 4-1/2-Inch 1972921

  • Delivers 1,000 or more cuts without changing the wheel.
  • Advanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1” carbon steel square tube vs. thin bonded abrasive cutoff wheels..
  • Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels.
  • Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision.
  • Does not wear down like bonded abrasives reducing dust particles for a cleaner work station.
Check Stock

LENOX Tools METALMAX Cut Off Wheel, Diamond Edge, 14-Inch x 1-Inch (1972932)

  • Delivers 1,000 or more cuts without changing the wheel.
  • Advanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1” carbon steel square tube vs. thin bonded abrasive cutoff wheels..
  • Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels.
  • Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision.
  • Does not wear down like bonded abrasives reducing dust particles for a cleaner work station.
Check Stock

CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 3/8" x 3/4" x 4", Made in The U.S.A. - 5 Pack

  • Diamond & CBN wheel dressing applications.
Check Stock

LENOX Tools METALMAX Cut Off Wheel, Diamond Edge, 7-Inch x 7/8-Inch (1972924)

  • Delivers 1,000 or more cuts without changing the wheel.
  • Advanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1” carbon steel square tube vs. thin bonded abrasive cutoff wheels..
  • Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels.
  • Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision.
  • Does not wear down like bonded abrasives reducing dust particles for a cleaner work station.
Check Stock

Kaka Industrial TX-X3 Φ4-Φ14 mm Drill Bits Sharpener and Grinder 6 Collects End Mill Re-Sharpener Portable Grinding Sharpening Machine CNC Router Bit Sharpener with Adjustable Angle

  • Portable idiot end mill sharpener can grind 2-flute, 3-flute, 4-flute end mill..
  • Grinding is accurate and rapid, easy operation with no skill to grind..
  • It can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material, Optional CBN grinding wheel for the HSS material..
Check Stock

Dremel Max Life EZ506HP 1-12“ (38.1mm) High Performance Premium Metal Cutting Wheel , Blue

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life EZ506HP Premium Metal Cutting Wheel is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp longer, stay cool, and won’t shrink..
  • Lasts 20X longer than our Fiberglass Reinforced cutting wheels..
  • Ideal for cutting a variety of metals including stainless steel, nails, rebar, metal studs, threaded rod, copper, conduit, metal HVAC ducts, metal door jambs, and galvanized strut..
  • The Dremel EZ-Lock is the first patented system of its kind making accessories changes 6X faster compared to using a standard mandrel. Accessory changes are quick and easy by eliminating the need for a screw and a screwdriver..
Check Stock